Photoshop :: Publish Web To Photoshop Versus Front Page
Mar 6, 2006
I have my web together but now I need help with meta tags. It relates to Photoshop as I am copying and pasting from Photoshop to Front Page.
#1 I see a "save for web" option, can you create a full web page with photoshop and publish it to the web?
#2 On Front Page in properties on the custom page there's "title" and "vaule", these are meta tags?? I'm confused about what title means, does title mean "the title of the page" or "the title of one key word". Example: is it, Title: Products page, and every key word that involves the content of the page? Or, Title: florist and then all the keywords directly related to Florist? Florist just being one title, and then furniture being a different title with it's own set of key words.
#3 I copy and paste everything in jpeg or gif, what's my disavantage of not knowing html and using the copy and paste method?
#4 Any suggestions about learning html?
#5 When I preview my page in browser if I minimize, the text and graphics fall out of place. I've tried viewing others pages and some fall out of place and some do not, what's the difference between them?
View 4 Replies
ADVERTISEMENT
May 29, 2008
getting my web page just right in photoshop only to find when I saved it front page will not open it.
I saved it for web in photoshop under HTML and Images, when I try to open it in photoshop it says,
"couldn't open file...." then states it's location.
I am totally new to front page and this is my first site I have tried putting together why wont it open?
I cant finish off the editing properly and ultimatly make a nice looking website.
I have asked for front page cause I dont have access to dreamweaver.
View 2 Replies
View Related
Sep 27, 2011
I'm building a site with WordPress and installed a plugin that will create a slider of images on the front page. For each image, there is specific text that goes with the image (just a simple quote). If it's possible to use Gimp to add text to the side of an image and not actually on the image?
Here's a link to the front page of the site that I'm attempting to add the text to. Currently, the photos are there and you will see the blank space next to the images. This blank space is where I would like to add the text. I've contacted the creator of the plugin and there is no way of doing this from within the plugin, itself.
[URL]......
View 1 Replies
View Related
Aug 16, 2013
I am attempting to publish a pdf of a booklet I've been working on. It is currently set up with facing pages.
I want to publish it as a pdf, but so that it maintains the booklet format. That is, when it opens as a pdf, one should see both left and right hand pages, as one would browsing through a regular book.
How does one do this with Corel? I know once one has published, one can open the pdf and change the view setting to 'two page display.' I want this to happen automatically when the viewer opens the document though.
View 4 Replies
View Related
Dec 19, 2012
I am using AutoCAD LT 2009. I have AcrobatPro installed on my machine as well.
I seem to have lost my ability to publish a a bunch of dwg files and have one PDF file as the output. It used to work fine...I would hit publish, add all my dwgs (all model tabs), configure all page setups to be one of my Adobe PDF options (I have few configured, one for color, gray, B&W, etc), hit the publish button and then adobe would be prompt me for a file name, and then voila - I have one multi-page PDF of my drawing set.
Where it got lost and what happened, I don't know. As for trying to fix it, I have tried everything below, but nothing that gets me back to where I was:
1. Tried using the built-in "DWG to PDF." At best, this will automatically generate a PDF for each drawing without any input from me. I then used Adobe to combine all the drawings into one file. I could live with this, however, the resolution of the PDF's is not enough. I even tried changing the resolution setting to 1200dpi...stills comes out bad.
2. Using the "Adobe PDF." I get prompted by adobe for a filename for each dwg. This is very tedious. However, the output files look nice and much better resolution than #1.
3. There seem to be a lot of mention in hte forums to a system variable PUBLISHCOLLATE. This does not exist in my list of system variables (maybe because I am using LT). I tried setenv command to create the variable and toggle it from 0 to 1...this does not affect anything.
4. Within the Publish Dialogue - There is no mention of PDF anywhere. My only options for 'Publish to' are 'Plotter named in the setup' or 'DWF'. Within the Publish Options, nothing related to PDF...only options for DWF. I have tried changing these anyway, not affect.
5. Toying the pc3 - I tried changing some settings with PC3 file (Adobe PDF and DWG to PDF)...nothing fixed the problem. I tried setting collate from NONE to REGULAR, tried changing port to AUTOSPOOL, PLOT TO FILE, PLOT TO THE FOLLOWING PORT...nothing worked.
View 9 Replies
View Related
Dec 4, 2012
I want to plot of .dwg file(with Multiple Layouts) as PDF using interop services, where PDF should contain all the layouts.
View 1 Replies
View Related
Jul 12, 2013
we are working on circuit drawings which are lengthy and we usually split the model into more than 100 layouts and publish pdfs.So we get 100 pdf pages. When we view the pdf, we need to scroll down to get into next page.
Can we create a pdf for complete circuit in single page, where we can scroll the page horizontally. This will work in viewing the page horizontally with continuity in the circuit.
View 4 Replies
View Related
Jan 30, 2014
I'm trying to publish (LR5 current version) to my facebook page (xyzphotography), but it posts to my personal timeline (xyz). They are both under the same account name (xyz). How to publish directly to a "Page"?
View 1 Replies
View Related
Oct 23, 2012
Is there a way to automatically convert each page of a document to bitmap in the process of publishing to PDF? maybe a macro that does this?
View 2 Replies
View Related
Apr 5, 2013
We are experimenting with turning on the auto publish to PDF on prompted save. (Options/Plot and Publish tab) This will be a very nice tool since we create PDF's of every dwg. that we create. However, I am having trouble locating the settings that control the page layout in this feature (The titleblock is not centered and is getting cut off when PDF is generated) but, When I preview the "standard" way of plotting to PDF, the drawing is fine. I assumed the settings would be one in the same?
View 3 Replies
View Related
Nov 21, 2012
I'm using Sheet Set Manager in Autocad 2011. I'm using 'page setup override', and as plot area 'print extents'. So far, so good. Until someone forgets something outside the title block, and the extents feature is not good anymore (several people working in the same projects).
So, I decide to use as plot area 'Layout' instead, typing the X & Y to determine the area to be plotted.
Now, the setup "override" doesn't override. It’s using the drawing plot area from the drawing itself, which completely defeats the purpose. Am I missing something?
View 0 Replies
View Related
Oct 12, 2012
when I trying to publish in single-sheet file. so I type publish on my command bar, then I chose publish to pdf but when i try to click on publish options to set the location where I need to put the pdf files the publish window freeze. same thing when i click on add sheet button.
NOTE: I have this problem especialy when I used AUtoCAD from home. to use AutoCAD from home I made borrow licence.
View 1 Replies
View Related
May 9, 2013
Using AutoCAD 2013, myself and several other coworkers have encountered an error message when creating a pdf with the publish command. I attached a screen shot of it.
We never experienced this in earlier versions. It doesn't happen 100% of the time, but it has been recurring more in the past month. I have restarted the computer after receiving the message and then invoked the publish command after restart and it was successful. I'm not going to do this every time I publish, nor do I see the need to turn off background plotting. That just seems like a bandaid fix.
I even tried publishing with different page setups to determine if it would react differently to any page setup, but it doesn't. I attached a view of my publish window, as well.
View 1 Replies
View Related
Aug 30, 2005
I have found loads of tutorials showing how to do this with a normal single tone page but I am having trouble getting the curl to work well on the bottom right hand corner with the texture and also the torn edge. I have tried distorting it but it just goes all blurred.
View 3 Replies
View Related
Jul 10, 2008
Everything starts up fine, however when I start a new document it does a program Error and can't complete. I try again, and I get this info below when it asks to check solution and close which only occurs when the second time I try and access anything in File or so. Also occurs when I try and open a file instead of new document start up.
I am using a HP Pavilion Laptop dv5220us.
Problem signature:
Problem Event Name: APPCRASH
Application Name: Photoshop.exe
Application Version: 10.0.0.0
Application Timestamp: 4601eae8
Fault Module Name: Photoshop.exe
Fault Module Version: 10.0.0.0
Fault Module Timestamp: 4601eae8
Exception Code: c0000005
Exception Offset: 00d39693
OS Version: 6.0.6001.2.1.0.256.1
Locale ID: 1033
Additional Information 1: c021
Additional Information 2: 11257bfecc11a7cd81cda2b8708292d1
Additional Information 3: a841
Additional Information 4: a6ce27b99b4d2944080c6127d8b42aa0
Basically, I can't start a new document or open one or really do anything without that error popping up.
View 27 Replies
View Related
May 9, 2012
what apart from PSB's ability to handle very large files, are the advantages of one over the other? Reason I ask is the PS Autorecover file has a PSB extension, which I guess enables the feature to handle any file size. So if it is used to recover your work, why do we need to continue to have two formats. Why not just one?
View 5 Replies
View Related
Feb 19, 2005
I would like to know the difference between using a mouse and tablet in matte painting, quality, style, you name it.
and why some artist can make art using a mouse at a very high quality
like using a tablet... how do they do that?
method I must use to paint/draw like that?
View 9 Replies
View Related
Jan 12, 2009
I'm trying to print a flyer that has art on the front and back. I copied the images to Microsoft Word on page one and two. I then printed page one and then turned the page over and printed page two on the back. Though I have the same settings for page one and two, it's not aligning.
Is there another way to do this so I can get perfect alignment for the front and back of the page. Can I do this with Photoshop or should I use a table in Microsoft Word or should I use another program altogether like Adobe Pagemaker or Quarkexpress.
View 8 Replies
View Related
Apr 14, 2012
I am a novice in Photoshop Windows platform. there are 2 ways of accomplishing the following task using Clipping mask and Vector mask.
View 2 Replies
View Related
Jul 20, 2012
I am 65 yrs young and use the Lasso Tool,Polygonal and Magnetic tools with a mouse.I just cannot control the outline area definition as precise as shown in all the tutorials. The "walking ants" are always screwed up and all over the place! Also, holding down the mouse button and scrolling the track ball is very hard for my hands.
Will a Wacon tablet w/pencil provide a better manipulation of PS(CS5&6) functions for outlining areas to be modified?
View 10 Replies
View Related
Aug 25, 2012
I found out that QuickLook in Mac OS X doesn't work properly for PSD documents if the file is saved without Maximize Compatibility feature. If you press space bar, only white canvas appears and not the actual document. I don't want to use this feature because I don't need the compatibility and all the files are much smaller without it. However, as I work with a lot of PSD files I am used to use QuickLook a lot. Is there a way to have maximize compatibility disabled and at the same time be able to use previews with QuickLook?
View 4 Replies
View Related
Mar 30, 2013
I have just upgraded by creative cloud to CS6. I can't find in CS6 the arrange brilliant documents icon which automatically tiles open documents in CS4 in one click. Where it is hidden?
View 4 Replies
View Related
Oct 21, 2012
I want to upgrade my computer and I want to know if I should go for a SSD 256 Gb vs 1 Tb HDD as a scratch disk. I already have 16 Gb of RAM.
View 24 Replies
View Related
Feb 16, 2008
I am an archivist. We have some old, rare documents from 19th century - collections of letters, diaries etc which I want to preserve electronically. I get excellent results when I use a scanner. However some of the documents are fragile and the use of digital photography would cause less damage.
I have been investigating this for some time and have got all sorts of advice - sometimes contradictory. Now this is the issue for me at the moment: I have some test photograph files (of documents) on my computer (which I photographed with a good digital camera and saved to computer.
Improving the output, removing background etc, is my issue. To what extent can I improve the photograph using Photoshop or some other similar program. I would love to submit one or two of these photo files to you who are expert and see what you can do with them. That would give me an idea of what I need. I am not sufficiently conversant with the photoshop program to do this myself.
View 17 Replies
View Related
Apr 6, 2012
One thing I notice is that when I use the Bezier curve tool in GIMP, when I stroke the path, the result is a jagged messy looking line. In Photoshop however, when I stroke the path with the pen tool, the result is a much cleaner, smoother line. Is there a way to get a smoother result in Gimp like Photoshop does?
View 1 Replies
View Related
Jun 22, 2013
Re: PS - Creating a Triptych in Photoshop | The Complete Picture with Julieanne Kost | Adobe TV
I have looked in Photoshop CS6 and Photoshop CC and can't find the 'Front Image' button.
How do I bring it up?
View 1 Replies
View Related
Oct 25, 2005
I'm bringing out a bodyboarding dvd, but need a little help with the design of the cover. Its titled "Scratching the surface". I was trying to find a tutorial that would demonstate how to get a decent scratch effect or even some claw marks but couldn't find anything.
If you've got any ideas I'd love to hear from them or if you know of any tutorials that would help it would be greatly appreciated.
View 3 Replies
View Related
Jan 12, 2009
I'm trying to print a flyer that has art on the front and back. I copied the images to Microsoft Word on page one and two. I then printed page one and then turned the page over and printed page two on the back. Though I have the same settings for page one and two, it's not aligning.
Is there another way to do this so I can get perfect alignment for the front and back of the page. Can I do this with Photoshop or should I use a table in Microsoft Word or should I use another program altogether like Adobe Pagemaker or Quarkexpress.
View 3 Replies
View Related
Jul 26, 2004
Hello,
Could you please tell me what is the front type of the "MOBIHOC 2004" in the attached picture?
Thanks a lot.
View 1 Replies
View Related
Jun 20, 2012
After a complete computer format, I was able to make cs6 work. Then I started experiencing slowdowns again. What had I installed that was not ok? Well, turns out that restoring my pc to a point right before the installation of Adobe Reader fixed everything. And I have the same problems if I go on a webpage where Flash Player is working.
View 3 Replies
View Related
Nov 24, 2013
I'm using Photoshop Elements 10. If I want to use Photoshop with digital art (paintings mostly) and want to do touch up work and move elements of paintings into multiple layers, what extra features does Photoshop have that would benefit this application?
And what features are in Photoshop Creative Cloud, and CS6, versus CS5? I do want to save some money and CS5 might be quite sufficient for my amateur uses.
View 3 Replies
View Related
