Photoshop :: How Can I Get Alignment For Front And...
Jan 12, 2009
I'm trying to print a flyer that has art on the front and back. I copied the images to Microsoft Word on page one and two. I then printed page one and then turned the page over and printed page two on the back. Though I have the same settings for page one and two, it's not aligning.
Is there another way to do this so I can get perfect alignment for the front and back of the page. Can I do this with Photoshop or should I use a table in Microsoft Word or should I use another program altogether like Adobe Pagemaker or Quarkexpress.
I using a data reference/shortcut to properly label an alignment in paperspace. However when I reference the alignment in and apply the labels the aren't the same as the original alignment that I am referencing. Is there a setting where I am supposed to apply a new beginning station.
Also it seems as though the stationing(distance) isn't even matching up 1:1 with the original drawing. For example in the original base drawing my alignment starts at 10+00 with the next PI at 14+76.98, but the stationing on the reference alignment starts at 0+83.33 with the very same PI being labeled as 1+23.08. So the very same distance is 476.98' in the real design and the drawing it's being referenced in, but the stationing of the referenced alignment shows it as 39.75 Units.
I've attached a screen of the beginning of the alignment.
Civil 3D 2012 Windows 7 Service Pack 1 Intel Core i7-2600 CPU 16GB RAM
Using Civil 3d2012, Is it possible to change the alignment label style set after the alignment has been created? For example, for an alignment that was created with alignment label set X - change the label set to alignment label set Y? It seems like this should be pretty easy, I must be missing something obvious.
I have a question on Alignment PI's. (Point of Inflection/Intersection)I have an alignment where some PI's have curves, others are merely hard bends.
Is there a way to automatically label the PI's even if they have an associated curve? (I'd like PI, PC and PT)Alternatively, can I only show markers at PI's without curves?
I’m wondering if there is a way to launch alignment grid view/alignment entities (attached) without the need to first launching “alignment”? This dialogue box is quite essential in editing the values of radius, degree of curvature and deflection angle for the selected curve.
Can I inherit the station from one alignment as the begin station for another alignment?
For example. Alignment 1 is 1000 ft long and starts at sta 0+00.
At sta 8+01, Alignment 2 begins and goes off in another direction.
I manually enter 8+01 for begin station Alignment 2. Life is good. Still in the design stage, and customer needs to modify Alignment 1 to avoid something. Now Alignment 2 intersects Alignment 1 at sta 8+15, but same N/E coordinates.
I manually enter 8+15 for begin station Alignment 2.
It would be better if Alignment 2 could inherit the begin station based on the new stationing from Alignment 1.
I'm bringing out a bodyboarding dvd, but need a little help with the design of the cover. Its titled "Scratching the surface". I was trying to find a tutorial that would demonstate how to get a decent scratch effect or even some claw marks but couldn't find anything.
If you've got any ideas I'd love to hear from them or if you know of any tutorials that would help it would be greatly appreciated.
I'm trying to print a flyer that has art on the front and back. I copied the images to Microsoft Word on page one and two. I then printed page one and then turned the page over and printed page two on the back. Though I have the same settings for page one and two, it's not aligning.
Is there another way to do this so I can get perfect alignment for the front and back of the page. Can I do this with Photoshop or should I use a table in Microsoft Word or should I use another program altogether like Adobe Pagemaker or Quarkexpress.
I'm trying to create some 3D text where the front (facing towards the user) side of the text has a gradient applied to it. I've tried applying the gradient before extruding it but as soon as you make it 3D the gradient dissapears. And there doesn't seem any options to apply a gradient in the inflation material layer. I'm sure this is possible though
I typically have multiple Photoshop documents open at once along with other programs. Let's say that I want to make a client's revisions. With CS5, I could have my email open and the Photoshop window I'm editing side-by-side. With CS6 and CC, when I click on the window I want to edit, ALL the photoshop windows come to the front, obscuring the email message.
Is there a way to prevent this from happening and only bring the one window I clicked on to the front? There is still an option under Window > Arrange > Bring All to Front, which wouldn't be necessary if the windows are always in front.
I have a little problem with the cropping tool in the new CS6 version.
In CS5 I had the oppotunity to choose "Front image" and the crop tool would copy the dimensions from the chosen image.
Now I made a mistake and cropped a picture with the wrong dimensions. Ususally I choose "original ratio", but this time I forgot. Then normally in CS5 I just choose one of the other pictures in my workspace (with the original dimensions) and hit the "front image" button, and then I got back the the picture I cropped in the wrong dimenions, and now I could easily crop it with the right dimensions.
I found another discussion in the forum that answered exactly this question, and it said "Try pressing 'R' in crop mode. It will open Crop Image Size & Resolution window, where you can choose Source: Custom, Front Image, etc."
But when I press "R" in the crop mode nothing like that comes up. Instead the opportunity to rotate comes up... :-( Not what I was looking for.
I'm trying to print a flyer that has art on the front and back. I copied the images from Photoshop CS to Microsoft Word on page one and two. I then printed page one and then turned the page over and printed page two on the back. Though I have the same settings for page one and two in Word, it's not aligning.
Is there another way to do this so I can get perfect alignment for the front and back of the page. Can I do this with Photoshop or should I use a table in Microsoft Word or should I use another program altogether like Adobe Pagemaker or Quarkexpress.
i can't figure out how to subtract the front shape from two already drawn shapes. I can draw a shape, choose "Subtract Front Shape" from the menu and then draw the second shape. But what if the two shapes are already there and i wanna subtract the front shape from the other.
How can I make a wooden building front into stonework ? I know it involves using the lasso to cut around the stone [I believe] and somehow placing the stone onto the wooden part of the building and using TYRANSFORM---but I need the steps again.
using PS CS3 on mac 10.8.6 - been fine for years and was OK two days ago. Now when I open it I get a blank window (just the yellow dot upper left) and all else is frozen - can't even quit. Used 'force quit' which works but does NOT say that it is not responding.
Tried rebooting and restarting etc - no change.I know its old but it was fine for my purposes - and I have not changed anything.
How would you keep solid image still in front of an animation scene. Let's say I make animated rain and I want to put a picture in front of the animation. I tried this, but my image kept moving when I wanted it to be still.
i would like to lighten the front portion of a seashell. how would i do this/ what selection tool etc. Attached is a photo of a seashell floating on some clouds.
I am working on a sign which needs to be backlit. I cant seem to get the light to interact with the shape in front. I need the light to spread across the shape, basically between the wall and the oval shape.
Is there any way to create an action or keyboard shortcut to set the Crop tool to the front window size in Photoshop CS6? I find that I use that several times a day. I got used to it being the top choice in the Crop tool presets menu.
I can do a square site plan fine but now I have to put a house on a lot with a arc front. The coordinates are S4d54'02E on the west side with a length of 108.54'. The back is n87d58'41"E with a length of 113.21. The east side is N25d53'25"E with a length of 118.29'. The front of the house has the arc and all it says is curve 18. I have the three sides but don't know how to get the front. The information on the curve is:
I have a PDF that I need to place a picture of my DL on. But when import it the photo (JPG) it is behind the PDF and I can't seem to get it to come from behind the PDF so I can attach to it. I'm pretty sure I've clicked everything I can with no success. I tried importing the jpg first then importing the PDF, but it still goes behind the PDF.
