Photoshop :: (OSX) Feature Request - Can Navigator Window Have Custom Breakpoints / Percentages
Jul 10, 2013
I was wondering if there could be a feature where you can right-click the Navigator window to set custom percentages?
When you currently right-click the navigator it just uses the OSX system right-click. I have been needing to use the percentage 133.33 during a project and have to manually type it in each time. If you could mark custom percentages as a breakpoint it would allow me to jump to that breakpoint when using CMD - /CMD + .
View 3 Replies
ADVERTISEMENT
Oct 25, 2011
I want to detect percentages of my artist's oil colors in any area of a vectorized photo that I point to.
So, I want to first vectorize a photo to reduce it to manageable separate color areas. Then, I want to be able to get a list of the various percentages of 108 different colors that make up any of the vector color shapes I point to or select. These 108 different colors are somewhat accurate small bitmap swatches that correspond to 108 artist's oil paint colors.
Alternatively, can I just somehow plug in this 108 swatch palette and have a software (Xara?) break down a bitmap into areas of vector color using only this custom palette?
Is this possible in Xara, or by any other means you know of?
View 8 Replies
View Related
Sep 5, 2013
My colors and value are a lot darker and saturated in my navigator window.
View 1 Replies
View Related
Nov 30, 2012
I work in full screen with Menu Bars 98% of the time. I also enjoy the new save in background feature. The problem is that when in full screen I can't tell when it's saving and the status of the save. This is particularly frustrating when I'm trying to close a file. I think there needs to be an option to have it save in background but pop up a status window, or some way to see the status of the save while in full screen.
View 6 Replies
View Related
Jun 26, 2013
My navigator window gets stuck on a previous image from time to time. Random moves like switching back to Library module or reloading / zooming the image doesn't seem to work either.
View 4 Replies
View Related
Oct 4, 2013
Some of the folder icons in the navigator window are spotted and some are solid.
View 1 Replies
View Related
Apr 1, 2013
i am using CAD2010 & VS2012.
start external program done and no problem with attact to process.
i set breakPoints in my program then i loaded it to autocad using netload so this breakpoint doesn't work , and my program complete all code without stop at my breakpoint .
View 8 Replies
View Related
Oct 12, 2011
I've been a faithful photoshop user for quite some time now, but today I got wickedly impressed by this tiny software that features this awesome specular highlighting technique that photoshop does not do by default.This software is called "Art Text 2"H! I had prepared some image links but cause I'm so new I can't put them.[URL]...
As you can see, the bevel reflection is created using the specular information of the "sphere map". Furthermore the program allows you to change the sphere map highlights interactively, and even choose your own image sphere maps. This is just amazing, isn't it? Creating realistic metal text or things is just super easy with this. I think everyone of us has had problems doing realistic metal effects on photoshop, am I wrong?
In Photoshop you have the "bevel and emboss" style feature, and it works pretty well, but it isn't made for say: reflecting a window on the beveled text.Sphere maps are commonly used in gaming to simulate realistic reflection of 3d objects, and I can think of a million ways of using this technique on 2d. way of simulating this sphere map reflection on layers on Photoshop?
View 4 Replies
View Related
Jun 14, 2013
I have been using the new populate feature. I would like to use custom skins. I have several biped figures that are what I would like to use for textures. I am not sure how the mapping works and you can not just copy the textures over.
What do I have to do to take my texture from my biped skinned character and apply it to the populate character?
View 2 Replies
View Related
Oct 10, 2013
Creating feature edit dialogs? I currently have working program that creates a custom pocket/cavity but I'm having trouble with the User Interface and setting up a solid structure to handle events.My goal is to mimick how the "add hole" dialog works by having the following attributes:
- Ribbon button to bring up dialog
- Dimensions update when the dialog text boxes are updated
- Right click menu to edit existing features
- Existing dimensions and other properties are loaded when the dialog is used to edit existing features
So far, I have my classes structured this way:
AddinServer (handles loading and unloading the command) ->
CavityCommand (defines the buttons and containes event handlers) ->
CavityFeature (wraps up multiple identicle cavities into one client feature) ->
Cavity defitions (draws individual cavities using more specific classes)
View 1 Replies
View Related
Jul 5, 2012
is it possible to create an entire feature using the API: an entry to the feature tree, regenerate geometry on demand, edit/create dialog box.
View 1 Replies
View Related
Oct 12, 2013
When I'm using the custom shape tool in CS6, it will often bring up a new window labeled "create custom shape". It's really disruptive and I'd like to know how I can disable it to prevent it from poping up.
View 6 Replies
View Related
Mar 21, 2012
So simple little retaining wall subassembly created in the SAC. When i extract multiple feature lines from a corridor using this subassembly, all the feature lines assume the elevation of the first link i selected. So if i first click on 'RW_Hinge" all successive feature lines will show up with the same elevations as "RW_Hinge". if i erase all the feature lines the select a different link say "RW_Top" then they all go to "RW_Top".
View 7 Replies
View Related
Nov 4, 2013
I'm looking to do sort of an adaptive annotation thorugh vb.net.
Essentially i'd like it start with a leader and instead of your normal text dial that appears, you get a box to punch in values in a grid. 5 columns across, as many as two rows.
The idea being if i punch in 1, 2, 3, 4, 5, 6 in the first six boxes all 5 in the first row appear with boxes around each number and then only the 6 has aa box around it on row 2.
I can see it as a table 5x2, and the format option being if the cell has text, the border type is outline. Although i don't think those options exist for inventor.
View 1 Replies
View Related
Apr 11, 2011
I am using corel draw to run my laser engraver and I am trying to make a custom frame. Epilog laser.com has a tutorial how to do it, but I am afraid it is a tutorial for corel draw x3 or x4. I have x5 and when I follow the tutorial, I am not able to get the result I want. I find trouble when I try to trim out the images from the frame.
View 5 Replies
View Related
Jan 31, 2013
I tried to load/insert a specific window style through use of the design palette but couldn't find the right type within the generic window styles that came with the software. I needed an 8 Blade x 150 glass Louvre Blades Window with a few standard openings currently used in our industry. In fact I needed to design several standards of these which I did but saved them as blocks with the dwg extensions.
In fact I really desire a way to design one that would be possible to be integrated into the styles drawing in the default location (C:/Program Data/Autodesk/ACA 2013/enu/Styles/Metric/Window Styles (Metric).dwg.
I understand that these default styles can easily be loaded into design palettes, entered into constructed walls and modified to certain specs in the appropriate dialogue boxes.
View 1 Replies
View Related
Feb 3, 2012
I have been working as a comic book colorist for US publishers for the past 3 years and have self-taught Photoshop Cs3 to myself over the past years.
Usually when i work on a comic book and check my blacks with a color picker it comes to:- 75% Cyan, 68% Magenta, 67% Yellow, and 90% Black
, but recently one of my publishers asked me to Ensure the blacks are:- 60% Cyan, 40% Magenta, 40% Yellow, and 100% Black. I have tried a lot of different setting in the color setting options in Photoshop, but have not managed to get the same percentages as specified by my publisher.
How can i manage to do this without affecting the color quality of rest of the page, as i would not want the print quality to be affected.
View 2 Replies
View Related
Aug 12, 2011
I am semi-new to Revit and am trying to make a go of it. I am trying to make a window, that looks like my AutoCAD window. So I open the Window Family.rft to start creating. I can adjust my wall thickness to match my brick wall, I can set the frame to the void that is already there.....my problem comes when I want to put on the brick mould. This overhangs the window frame and thus is outside the pre-ordained void. When I try to make a void extrusion to cut back the outside face of the wall and allow the brick mould to show, it will not work - only the originally supplied void (that comes with the template) works.
Revit will not allow me to "Cut Geometry" saying "A Family cannot have an opening and cut in the same host". If I set the brick mould inside the supplied opening, then the inside face will have a gap between the drywall and the window frame.
View 3 Replies
View Related
Mar 22, 2013
I have a customize form to use in AutoCAD. If I minimize the form, I can not see it anymore in the AutoCAD application tray. I want to minimize my form and later restore it after editing in .dwg file.
How can I do that?
View 4 Replies
View Related
Feb 27, 2006
is possible to use percentages?
i have disabled "constrain proportions". i fill in W & H. photoshop automatically rounds up. my web designer has my thumbnails on my site (photography site) sized at W41.6 and H98.8.
View 1 Replies
View Related
Jan 19, 2005
I know you can rescale an image by using Transform and then typing figures into the percentage boxes on the toolbar but is it possible to change these boxes to accept actual measurements rather than percentages.
I relaise you can drag the edges of the image to resize it but this is too fiddly and time consuming when you have lots of images making up a larger design.
View 4 Replies
View Related
Dec 12, 2003
it asks to select a percentage of a color. Example (30% black, 45% gray)
I don't understand how to accurately get a percentage of color.
how to get percentages of color conveniently in Photoshop?
View 4 Replies
View Related
Jun 14, 2013
What I want to do is insert this link into a blog post (that's not a problem), but I want it to open in a new window AND I want that window to be of a custom size (the size of the stage of my annimation). The best way I can describe this, would be like a pop-up window.
View 1 Replies
View Related
Jun 1, 2012
Whenever I am about to change the dimension of an element, in the option bar, width and height appear in percentages.
Is there a way I can make these appear in pixels?
View 2 Replies
View Related
Aug 3, 2012
Using Photoshop CS5 for the PC.
When I select a layer and look at the info panel, I see that the layer height and width is shown apparently by default in percentages. Specifically 100% Height and 100% Width.
I would prefer that the Info panel show height and width in Pixels instead of Percentages. Finally, after seeing the height and width in Pixels I want to change the height by entering the height in pixels. How can I do that?
I don't want to use a "ruler" to do this, I just want to be able to enter the pixels (height and width) that I want the layer to b resized. For example when selecting a rectangle that is currently 100 pixels tall and 50 pixels wide, I want to be able to just change 50 pixels wide by entering (in a field) 25 to make it 25 pixels wide.
In Fireworks I resize by pixels all the time. But can't find a similar method in Photoshop.
View 3 Replies
View Related
Dec 2, 2011
Is there some way to create a table with percentages? Example:
EXTERIOR MATERIALS
BRICK VENEER 3,451 SF 43%
PLASTER 4,320 Sf 57%
TOTAL 100%
This was cross-posted to the AUGI forums... No responses.
View 3 Replies
View Related
Aug 16, 2013
I am using AutoCAD Civil 3D to do a slope analysis across project locations. When defining slope categories, I am finding that the max slope percentages are astronomically high; ranges are being returned up to 360,000%--and I've only done three regions! I understand vertical slope but these percentages are not realistic by any means, especially through the areas in which I am working.
A specific example: between a contour at elevation of 792 ft and a contour at elevation of 794 ft at a distance of approximately 60 feet, the slope percentage being returned is in the 9000% range. There is not a sudden drop or rapid change in elevation between these two contour intervals to provide reason for this high of a percentage. I would expect to have a slope percentage nearer the 3% range.
The data source of the contour information is LiDAR being brought into CAD via the task-based geospatial option using MapImport. All data tables are being kept. Polygons are being imported as closed polygons. There are no surface errors being reported upon creation. The project locations were created in another program and imported into CAD using the same manner. The only thing that I can conjure up is that there is some sort setting issue.
View 4 Replies
View Related
Jul 22, 2013
I recently bought an HP 6600 printer to replace a cheapo Lexmark printer.
I'm making maps -> photoshop to Illy to print with tiling set at 6-8 pages. When I print on the new HP, the resize percentages are off; so streets, numbers, text, etc. do not line up when pieced together.
This did not happen with the cheapo Lexmark, so I am assuming that it is the printer?
View 1 Replies
View Related
Jan 14, 2013
I'm making a swatchbook (Pantone ® style), with a large 100% swatch and three smaller ones (5%,25% and 50% ink.). Right now I've got a 7x7 grid with all the swatches as I want (see screenshot), however the other 26 other pages only have the 100% swatch. Is there an 'automated' way I can make the smaller swatches in the 3 different percentages?
View 3 Replies
View Related
Nov 24, 2003
I like to use the sharpen feature and the unsharp mask feature but haven't gotten very good at it. Mostly I'm wondering if there is a way to calibrate the sharpen function so that it doesn't sharpen quite so much each time I click it.
View 2 Replies
View Related
Jun 19, 2012
I've made a design in Ai CS6 (with colorspace) and have used several Pantone swatches. From a few Pantone colors I have used only a percentage of the color, for example the design consists of: 75% of Pantone 485 C, 32% of Pantone 1345 C and 100% of Pantone 154 C.
In the process of the design I have used several other Pantone colors which are not used in the final design, but they are still in the Swatch tab/list. So when you click on the triangle (upper right corner) > "Select All Unused..", the Pantone colors that are only used as percentages (Pantone 485 C & Pantone 1345 C in the example) are being selected as "Unused" ?!
I have been using Ai CS4 before this version and in that version this wasn't a problem.I could you percentages of Pantone colors without the swatch being selected as "Unused".
I really don't want to manual delete every unused swatch by dragging it into the trash bin.It would be such a time wasting handling.This is really inconvenient as I am working for a print and design company and need to save the Pantone colors that are used in the design, even if they are only a percentage of the Pantone swatch.
View 4 Replies
View Related
