Photoshop :: Rescaling Images - Not Using Percentages
Jan 19, 2005
I know you can rescale an image by using Transform and then typing figures into the percentage boxes on the toolbar but is it possible to change these boxes to accept actual measurements rather than percentages.
I relaise you can drag the edges of the image to resize it but this is too fiddly and time consuming when you have lots of images making up a larger design.
View 4 Replies
ADVERTISEMENT
Aug 23, 2012
Is it possible to rescale whole assemblies after they are created?
Say I have three serially linked worm drives that fit inside a cube 50 cm on a side, can I take the file and reset the dimensions to where it could fit inside a 1 cm cube?
Does it matter how complex the assemblies are? Could an entire car be rescaled to fit inside, say, a 1 mm cube? Never mind that a normal internal combustion engine that small might not work at all because of the air viscosity at that scale--it's not real.
View 1 Replies
View Related
Jun 9, 2013
I have just bought Ultimate X6 and encountered serious problem already.
The question is, "Is it possible to completely disable re-scaling image on the import?"
It seems like it has only 2 options, "Fit to project" and "Keep aspect ratio".
What I want is something "Keep source resolution" because when I put an image of a map, which is 2 or 3 times larger than the project resolution, the image become completely useless due to the re-scaling.
Now, again, is there way to ditch this re-scaling?
View 8 Replies
View Related
Jun 25, 2012
1. When I use the rotate manipulator the rotated object scales up in the world Y axis warping the object when rotating. In a prior step I scaled the object in the Y axis. I scaled the object while the tool was set to local. However I've done many times before but never had this issue. I've deleted history, cleanup, etc but nothing works. The channel box shows all scales are at 1. To test the manipulator, I created a cube and rotated it but the cube didn't scale so it must be something with the object itself.
The pictures show the scaling in relation to the rotate tool. I zoomed to place the object exactly within the inner ring. You'll see it grows when rotated.
2. The rotate manipulator is grey or partially grey. The tool works so it's not a locked channel. Since both issues happened at the same time I'm thinking they are related.
3. I can't get the X/Y grid to show on the front view. The grid is enabled on the panel and in the preferences. The front view, shows the plane of the X/Z grid. The side view shows the Y/Z grid. The top view show the X/Z grid.
View 4 Replies
View Related
Feb 3, 2012
I have been working as a comic book colorist for US publishers for the past 3 years and have self-taught Photoshop Cs3 to myself over the past years.
Usually when i work on a comic book and check my blacks with a color picker it comes to:- 75% Cyan, 68% Magenta, 67% Yellow, and 90% Black
, but recently one of my publishers asked me to Ensure the blacks are:- 60% Cyan, 40% Magenta, 40% Yellow, and 100% Black. I have tried a lot of different setting in the color setting options in Photoshop, but have not managed to get the same percentages as specified by my publisher.
How can i manage to do this without affecting the color quality of rest of the page, as i would not want the print quality to be affected.
View 2 Replies
View Related
Feb 27, 2006
is possible to use percentages?
i have disabled "constrain proportions". i fill in W & H. photoshop automatically rounds up. my web designer has my thumbnails on my site (photography site) sized at W41.6 and H98.8.
View 1 Replies
View Related
Dec 12, 2003
it asks to select a percentage of a color. Example (30% black, 45% gray)
I don't understand how to accurately get a percentage of color.
how to get percentages of color conveniently in Photoshop?
View 4 Replies
View Related
Jun 1, 2012
Whenever I am about to change the dimension of an element, in the option bar, width and height appear in percentages.
Is there a way I can make these appear in pixels?
View 2 Replies
View Related
Aug 3, 2012
Using Photoshop CS5 for the PC.
When I select a layer and look at the info panel, I see that the layer height and width is shown apparently by default in percentages. Specifically 100% Height and 100% Width.
I would prefer that the Info panel show height and width in Pixels instead of Percentages. Finally, after seeing the height and width in Pixels I want to change the height by entering the height in pixels. How can I do that?
I don't want to use a "ruler" to do this, I just want to be able to enter the pixels (height and width) that I want the layer to b resized. For example when selecting a rectangle that is currently 100 pixels tall and 50 pixels wide, I want to be able to just change 50 pixels wide by entering (in a field) 25 to make it 25 pixels wide.
In Fireworks I resize by pixels all the time. But can't find a similar method in Photoshop.
View 3 Replies
View Related
Jul 10, 2013
I was wondering if there could be a feature where you can right-click the Navigator window to set custom percentages?
When you currently right-click the navigator it just uses the OSX system right-click. I have been needing to use the percentage 133.33 during a project and have to manually type it in each time. If you could mark custom percentages as a breakpoint it would allow me to jump to that breakpoint when using CMD - /CMD + .
View 3 Replies
View Related
Dec 2, 2011
Is there some way to create a table with percentages? Example:
EXTERIOR MATERIALS
BRICK VENEER 3,451 SF 43%
PLASTER 4,320 Sf 57%
TOTAL 100%
This was cross-posted to the AUGI forums... No responses.
View 3 Replies
View Related
Sep 4, 2012
I have just installed 2012 and have drawn a 3d model. In paperspace i have a couple of viewports , all nicely set out at 1:5 scale. then i click in another viewport and bam, all the other viewports change scale (zoom out) and orientation. is there some system variable that i have overlooked?
View 9 Replies
View Related
Oct 25, 2011
I want to detect percentages of my artist's oil colors in any area of a vectorized photo that I point to.
So, I want to first vectorize a photo to reduce it to manageable separate color areas. Then, I want to be able to get a list of the various percentages of 108 different colors that make up any of the vector color shapes I point to or select. These 108 different colors are somewhat accurate small bitmap swatches that correspond to 108 artist's oil paint colors.
Alternatively, can I just somehow plug in this 108 swatch palette and have a software (Xara?) break down a bitmap into areas of vector color using only this custom palette?
Is this possible in Xara, or by any other means you know of?
View 8 Replies
View Related
Aug 16, 2013
I am using AutoCAD Civil 3D to do a slope analysis across project locations. When defining slope categories, I am finding that the max slope percentages are astronomically high; ranges are being returned up to 360,000%--and I've only done three regions! I understand vertical slope but these percentages are not realistic by any means, especially through the areas in which I am working.
A specific example: between a contour at elevation of 792 ft and a contour at elevation of 794 ft at a distance of approximately 60 feet, the slope percentage being returned is in the 9000% range. There is not a sudden drop or rapid change in elevation between these two contour intervals to provide reason for this high of a percentage. I would expect to have a slope percentage nearer the 3% range.
The data source of the contour information is LiDAR being brought into CAD via the task-based geospatial option using MapImport. All data tables are being kept. Polygons are being imported as closed polygons. There are no surface errors being reported upon creation. The project locations were created in another program and imported into CAD using the same manner. The only thing that I can conjure up is that there is some sort setting issue.
View 4 Replies
View Related
Jul 22, 2013
I recently bought an HP 6600 printer to replace a cheapo Lexmark printer.
I'm making maps -> photoshop to Illy to print with tiling set at 6-8 pages. When I print on the new HP, the resize percentages are off; so streets, numbers, text, etc. do not line up when pieced together.
This did not happen with the cheapo Lexmark, so I am assuming that it is the printer?
View 1 Replies
View Related
Jan 14, 2013
I'm making a swatchbook (Pantone ® style), with a large 100% swatch and three smaller ones (5%,25% and 50% ink.). Right now I've got a 7x7 grid with all the swatches as I want (see screenshot), however the other 26 other pages only have the 100% swatch. Is there an 'automated' way I can make the smaller swatches in the 3 different percentages?
View 3 Replies
View Related
Jun 19, 2012
I've made a design in Ai CS6 (with colorspace) and have used several Pantone swatches. From a few Pantone colors I have used only a percentage of the color, for example the design consists of: 75% of Pantone 485 C, 32% of Pantone 1345 C and 100% of Pantone 154 C.
In the process of the design I have used several other Pantone colors which are not used in the final design, but they are still in the Swatch tab/list. So when you click on the triangle (upper right corner) > "Select All Unused..", the Pantone colors that are only used as percentages (Pantone 485 C & Pantone 1345 C in the example) are being selected as "Unused" ?!
I have been using Ai CS4 before this version and in that version this wasn't a problem.I could you percentages of Pantone colors without the swatch being selected as "Unused".
I really don't want to manual delete every unused swatch by dragging it into the trash bin.It would be such a time wasting handling.This is really inconvenient as I am working for a print and design company and need to save the Pantone colors that are used in the design, even if they are only a percentage of the Pantone swatch.
View 4 Replies
View Related
Aug 1, 2013
Illustrator CS6 (other users on 5)
Mac OS 10.6
I just need to go from K and tones of K to a spot color and tones of a spot color.
I'm using recolor artwork because I can't merge into K. The art comes in from our customers as K so we can't just design differently.
The rectangles on the right are k and tones of k. The rectangles on the left are the results after converting to a spot color with recolor artwork. Using recolor artwork. I just need a way to accurately move the tones from k to a spot.
View 16 Replies
View Related
Dec 19, 2007
I have recently stumbled upon a problem I cannot correct. I am using Corel 11 and although I have the default CMYK palette selected, all the colors ( for CorelDraw and PhotoPaint) are in 255 percentages as opposed to the 100% CMYK model. I must have inadverdently selected this color mode but cannot figure out how to revert back to the 100% model. This makes it impossible to determine the exact color you want based on CMYK percentages. I know this is a RGB model but all colors are displayed in CMYK ex. C- 233 M- 122 Y- 114 K- 155.
View 10 Replies
View Related
Mar 15, 2013
I'm trying to show, using the eyedropper tool, the actual values of pixels in an 8-bit grayscale image (Mode command confirms that's what's there). In the Info panel, the eyedropper tool displays percentages for every type of color information (K, CMYK), while the "8-bit" field remains blank.
View 9 Replies
View Related
Jul 24, 2013
All files that have "almost" a white background in coreldraw are not identified by contacogge of corel. The minimum percentage of magenta or yellow 1% 2% is M = 0 y = 0 while the same file in photoshop it appears correctly. la'llegato explains well what I mean.When i print image i see red in background and this is a great problem.
View 4 Replies
View Related
Sep 29, 2005
where I can find script/plugin/software for making images composed of images. I'm desperately needing this for an non-profit assigment. Any help would be very much appreciated!
I'm looking for a script, software or photoshop plugin or anything that could help me with this.
What I want to do is this: Out of ~ 1000 pictures I want the software to arrange them into visualizing an image which I have choosen.
View 3 Replies
View Related
Jan 4, 2004
I am in the process of completing my Photographic website and need to make thumbnail and larger sizes for the the site. The site will have approximately 100 images on it. Clicking the thumbnails will connect to the larger images. How do I make both sizes in PS CS? Perhaps their is a generator that you would recommend for Mac 10.2?
View 3 Replies
View Related
Oct 31, 2013
I am attempting to combine several images into a collage of reduced-sized images that can be expanded when clicked on
View 1 Replies
View Related
Apr 1, 2013
A long time ago, when I was using Photoshop Elelments I found a plug-in that made it possible to work with stacks as a unit.
If I labeled the top image in the stack that lable was applied to all the images in the stack; then I could sort the the image on top and all the images in the stack would stay together, or if I deleted an image in the stack all the images in the stack were deleted. Without it I have open each stack I lable and apply the lable, so when I sort the stacked images they stay together.
View 7 Replies
View Related
Feb 20, 2012
I need to convert color images of vehicles to monotone images. When done correctly they will look like the car has been primed in preparation for painting.
Conversion to gray scale does not do the trick.
View 1 Replies
View Related
Jul 13, 2013
I'm making a collage containing 4 images with different resolution. I want each image to have faded edges (to white) and I'm using gradient tool to accomplish this. The problem is that since the images have different resolution the gradient tool gives different result on each image even though I make the same "swipe". Is there another way of accomplishing these faded edges, equally looking and of the same size? The faded edges (to white) will, as you might have understood already, constitute the limit between the four pictures, that is, a white cross.
View 1 Replies
View Related
Nov 9, 2005
Hi, I am starting a new business making art prints for artists. I have purchased this huge printer ... just got it. I've been studying photoshop for months using "classroom in a book" and am finding out that I've probably studied the wrong thing.
I have three questions and thanks in advance for any of your expertise.
1. I successfully printed out a two foot by two foot photo I took of my husband with my 8.2 megapixel camera. Then, tried to print out another photo.... used the same photoshop settings, but the print was 6 inches by 6 inches...... I did notice that the second print was only 16. %... I wondered if that caused the difference in size? How do I set that to 100 % if that is what is needed?
2. I want to print out multiple small prints using this big paper and printer... I want to tile these various prints (all different) along the top making rows... I want them to be all different. I called Epson support and they said I could do that in photoshop. Do I use the browser?
3. I have a wide format scanner. It does up to 11 x 17 inches. If I have something larger to scan, let's say, I scan the bottom of the image and then scan the top of the image, how do I put them together?
View 6 Replies
View Related
Mar 3, 2013
Just installed Lightroom 4, more than 60000 images were imported. Many of them were duplicates, triplets and so on. I want to have a clean, unincombured library. Should I delete the 60000 images and reinstall the images from my photo digital cards or use the slow process of "X" out the unwanted images? I would like to start improving my images vs removing the unwanted images.
View 2 Replies
View Related
Dec 3, 2012
I've been having problems selecting images in the library module when multiple images are in view (not down in the timeline, but in the main window). It seems sporadic with which ones it won't let me select, it somehow manages to be the ones that I need to click....!! I just literally can't click it as if it were an image I already imported or something, but it's not grayed out like that. I've been having to select a nearby image then use my arrow keys to navigate to and click the image I need.
View 2 Replies
View Related
Mar 27, 2011
But I wouldn't be able to upload a hundred tiny, plain images. I made this to add onto the background removal FAQ. I hope it's accepted.
[URL].......
(Image is clickable.)
View 10 Replies
View Related