I need to convert color images of vehicles to monotone images. When done correctly they will look like the car has been primed in preparation for painting.
Conversion to gray scale does not do the trick.
Consider the following image in which all of the pixels are grey. How can I easily select all the grey pixels and turn them black?
View 3 Replies View RelatedHow do I convert a single color bitmap to a monotone image using only one spot color?The result I get appear very pale....like wash out....
View 8 Replies View RelatedI want to combine four b/w images of the same object using slightly different illumination into one final colorized image.
View 1 Replies View Relatedanyone know can give me a action to convert color images to black or sepia?... i know you can use channel mixer but i can't seem to get it right...i guess i don't know much about color.
View 2 Replies View RelatedHow do I turn off this feature and reverse the images back to the way I shot them?
View 3 Replies View RelatedFive minutes ago, I verified that my image in Camera Raw prior to importing into Adobe Photoshop CS6 was in 16-bit mode.
Immediately after I imported it into Photoshop and it became a .psd document, I verified once again that it was still in 16-bit mode.
Then I created a duplicate layer, selected the sky, and created a layer mask from that selection.
No big deal.
NOW I SEE, per the below, that I am in 8-bit mode.
Why is that?
Is it true that ANY MASK I create forces the entire image into 8-bit mode?
I own Photoshop CS3 and would like to know which product could be used to acheive the following:
1. Inputs
--- 4 2D images (in GIF, JPG, PNG or TIFF format) that have all 4 sides.
2. Output
--- 3D model using the 4 side views and create an video animation that can be used in standard format video files.
If this requires multiple steps and products, would like to know the same. It would be nice to understand which step or product can achieve which part so that I could replace that with other products if needed.
I need to convert 1220 jpg images to black & white, a size of 36x12 mm and 240dpi.
I understand how to make an action and a droplet but the issues are;
1, How can I get Photoshop to resize the images to a width of 36 mm OR a height of 12 mm and then stretch the canvas size to the right width or height? Some images width are higher than their height (of course) and vice versa (but the converted images needs to be exactly 36x12 mm)
2, When I tried to make an action and a droplet I got dialogs all the time with questions about jpg quality or something about feather.. How can I get the droplet to just do it without asking about some of the images?
I've used Firefox to save a series of images pulled from an Adobe Flash slideshow on Flickr. Does Photoshop have the ability to convert these files to .jpg? Would it be as easy as doing a "File...Save As", or will I need to incorpotate another program? I have the Master Collection, if any of those would be required.
View 4 Replies View RelatedI once saw a Star Wars poster wich was made up of screenshots of the movie and when you looked at it from a distance you could see a character of the movie.
I was wondering if there is a special technique or even better a filter to recreate this
effect :
Basicly I have an image and loads of other images And I would like the first Image to be build up of all the other images ... (infact the other images will l represent 1 BIG PIXEL of the original image ...)
I need a free software to convert Batch images from Tiff To Gif?
View 3 Replies View Relatedhow do i convert images to vector or eps? i have tried inkscape and xara graphic design and the result was too blury.
View 4 Replies View RelatedHow do I convert raw images to jpeg i have photoshop11
View 1 Replies View RelatedI am using PSE9 and just put it on our new Mac 10.8.2 from windows 7. It runs fine but things aren't quite the same. On windows if I wanted to covnert a RAW file to jpg and was in the organiser I just clicked on file, save, and selected jpg and could choose mulitple photos easily. On the mac when I am in the organiser and click on file there is no save button....is it hiding. I can do them one at a time when I'm in edit but that is a very long way about doing it. Is there an easy way to select lots of photos in the organizer and convert them to jpg from RAW?
View 12 Replies View RelatedI was given the follwoing info. but not sure it answers fully - it still doesn't resolve the problem of converting to CMYK with the icc profile. I think this might be an option if the profile is loaded into the colour setting (colour settings under edit menu as oposed to convert to profile and its convert to profile I have been trying to action. Am I missing something straightforward?
you can do batch process in Photoshop
[URL]
-There is a fast and easy method to batch convert many RGB photographs to CMYK files by using Photoshop
-Please open an image, then open the Action Tab (Window > Actions)
-Please click 'Create new action' button, name the action in the text field and click the 'Record' button.
-Now it is recording, so select 'Image > Mode > CMYK Color', then hit the 'Stop' button in the Action Tab.
-The action is now created ready for the next step.
-To batch convert a folder of images, just select 'File > Automate > Batch' and the following window opens.
-Choose the 'Convert RGB to CMYK' action from the drop-down list, choose the source folder where your images are stored, then choose a destination folder where Photoshop will save the converted images.
-Click the 'OK' button and the batch process will start. How fast will depend on the number of images that need converting.
-The action you created will be stored, so you only need to perform a new batch process the next time you need to convert a batch of images.
I use Photoshop to convert images to halftone bitmaps for silk screening, and have come across a new problem. I have separated my three gray scale layers, and converted the first layer (a scanned B+W image) as I normally do, without any problems.
That is: Image>Mode>Bitmap / Halftone, 600 dpi / 47 lpi, 45 degree angle.
I then try to do the same thing with the other two layers (objects drawn with the pen tool in Photoshop in black with no background). But the halftone doesn't work. When I try, the watch appears while Photoshop works, then there are the bodies on a white background. The black drawings continue to be solid as before only with somewhat pixelated edges. I have scoured the internet and haven't been able to find a relevant thread.
I have just moved over to Photoshop CS6 from Elements 10. One thing I can't work out how to do is to have PS automatically convert opened files to RGB, exactly like PSE does.
View 8 Replies View RelatedI am looking for an action or preferably a way to create one, that takes a GIF file with multiple images (=animation) and puts all images side by side and saves it.
View 9 Replies View RelatedWhat is the best process to convert colour images to black & white using PSE11?
View 2 Replies View RelatedI have a solid red image and I want to change that red to an exact red hex code I have. Is there a way to change this color without affecting the quality of the image? I thought this would be really easy, but everything I've found online doesn't give me the color I want, or It doesn't allow me to be 100% accurate.
View 7 Replies View RelatedHave an illustrator cs6 file I just sent to a client for printing. It has linked rgb and CMYK files. When I sent the file I forgot to convert the rgb images to CMYK. They were linked psd and tiff files. Don't have direct contact with who will print. Do I need to worry about the RGB images outputting poorly? Or will Illustrator handle the conversion ok just in case printer doesn't check the files carefully.
View 4 Replies View RelatedI just started using Paint.net few days ago and would like to know if there are any plugins to convert my images into Black & White.
View 1 Replies View Relatedtrying to do a script to save time on image analysis. I need to convert RGB JPG or TIF files into grayscale mode and save them as BMP. I have hundreds of images to convert before doing the analysis.
I tried to adapt a French script by Frédéric Bisson. However, this is my first attempt to use a script, so I probably messed up the translation, as when I try it I get the message "Error while executing script-fu-comet:; Error: not enough arguments".
The script:
; Definition of acceptable extensions
(define COMET-EXTENSIONS
'("jpg" "JPG" "JPEG" "tif" "TIF" "XCF" "PNG")
[Code]....
In the old days (15years ago) we scanned a lot of files to DXB, and simply imported the image into the .DWG as small objects. (I believe they were treated as polyline segments). The lines from the original scan became a series of small polyline segments (not joined) but the scanned image plotted as good as the original, and even better, the objects could be erased and a "hybrid" drawing created without xrefs or "embedded" raster files. You could manipulate the scanned objects with normal autocad commands, and they existed on Layer 7.
Now, I am forced to Import a TIFF and "embed" the object (if I want it to be a permanent part of the drawing), and edit it with seperate programs like Raster Design.
QUESTION: How to convert a "embedded raster image" into a DXB image?
The scanner used to do the work for me and save the image as DXB. It was not a "vectorization program", but the raster lines became small (not joined) polyline segments in the process.
I don't want to "vectorize" with a seperate program, because then it just "traces" with a zero-width polyline.
The old scanner used to save to DXB, now I don't even see that as an option.
Any words of wisdom about creating a "scan" that can become "objects" (even small dots) INSIDE the DWG file, instead of a "Raster Image" that has to be xref'ed or "embedded", and will not even plot to a DXB or HPGL format?
I have mostly TIFF files that I would like to "convert" to DXB, and not have to re-scan them. I hate that the Raster file is treated as a seperate xref or "embedded" Raster Image.
I KNOW we used to scan directly to DXB and bring in the objects with the DXBIN command!
can Corel VS Pro X5 (or X6) convert video clip frames to images ( .bmp, .tif, ...)? Also can convert images to video clip frames?
View 12 Replies View RelatedIn the old days (15years ago) we scanned a lot of files to DXB, and simply imported the image into the .DWG as small objects. (I believe they were treated as polyline segments).
Now, I am forced to Import a TIFF and "embed" the object (if I want it to be a permanent part of the drawing), and edit it with separate programs like Raster Design. How to convert a "embedded raster image" into a DXB image?
The scanner used to do the work for me and save the image as DXB.It was not a "vectorization program", but the raster lines became small (not joined) polyline segments in the process.I don't want to "vectorize" with a separate program, because then it just "traces" with a zero-width polyline.The old scanner used to save to DXB, now I don't even see that as an option.
Any words of wisdom about creating a "scan" that can become "objects" (even small dots) INSIDE the DWG file, instead of a "Raster Image" that has to be xref'ed or "embedded", and will not even plot to a DXB or HPGL format?
I have a folder of 50 images. The images are all different sizes and dimensions (ranging from about 400x600 to 1600x900).
Separately, I have a little design on a canvas in HD dimensions (1920x1080).
The end goal is just to be able to lay out all the photos on the center of the canvas as 50 new individual images (with the HD dimensions of the background canvas).
Obviously, to load in 50 unique images and then export each of them would take a long time. So I was hoping that there is a way to both (a) automatically combine multiple unique images to a common background, and then (b) export them all.
I have a page of clipart symbols. Illustrator recognizes that they're all separate... but how can I convert them in a batch process to individual symbols?
View 5 Replies View RelatedI need to convert images to CMYK to submit photos for an article. I know Photoshop will convert, but don't know which software. If Lightroom does not convert to CMYK, which would I need to get?
View 14 Replies View RelatedI'm looking for a script/program that if you run it, all the .eps files in a folder will batch convert to a png-24 with 250% scale.
View 20 Replies View Related