I just got the new Canon 70D and I went to photoshop to edit my picture (I just got the cloud version today) and it won't open my files... I went to the help files and does not even support my camera.
View 5 RepliesCannot open a Photoshop Elements 7.0 file that was created yesterday. It says the file is not compatible with the current version. How can I get it to open?
View 1 Replies View RelatedHow do I find the current version of VSProX6 that I am running?
I have tried numerous times to download the Newblue TitlerEX from the "Do More Tools" tab. I get an "Your download is ready. Install Now" notice, but nothing happens and nothing appears in my download folder.
I have a problem concerning the frame generator skeleton. When I try to save my assembly with its frame.iam and skeleton.ipt, I can't save it. The save window says that the skeleton is not the current version.
In the folder where the skeleton file is saved, two skeleton ipt files are appearing, one "skeleton.ipt and one "skeleton.newver.ipt"
I'm working with Autodesk Inventor Professional 2012, in combination with Autodesk Vault 2012.
Why are my previously edited canon 5d mark 3 raw xmp files no longer recognized and all sliders set to zero? I can see the xmp files associated with the raw file in their folder. The files were originally edited in CS6/ACR 7.x -in July 2012 - and recently re-opened in the same CS6/ACR 7.x.
The canon 5d mark 2 files from the same time/event are showing up fine. I have updated everything, but both before and after the update, same issue with the Mark 3 files.
On a side note:We have found that opening mark 2 files (that were originally edited in CS4 / ACR 5.7) in CS 6 / ACR 7.x and making any changes such as color coding causes all previous xmp information being zero'd out in the mark 2 xmp file. Not sure if this is a symptom of the same problem? Except the difference here is the Mark 3 files have never been touched outside of version CS6/ACR7.x - however the folder which holds both mark 2 & mark 3 files from the same event has been opened in the CS4 / ACR 5.7 window but without touching the files. By opening the folder in CS4 I can see that the Mark 3 files aren't reading and then know this event was originally edited in CS6/ACR 7.x
Specifics:
PS CS6 13.0.4 x64
Mac OSX 10.6.8
Canon 5d Mark 3 Raw files
My external hard drive recently crashed and now I am trying to restore my Lightroom catalogs. When I try to open the most recent back-up, I keep getting a message stating the catalog is too new for the current version of Lightroom. I have not done anything to my most recent version of LR.
View 6 Replies View RelatedHow can I search and/or filter to find photos which have not been updated to the current Process Version? I would like to get a list of the photos rather than going through them one by one and looking for the lightening bolt.
View 2 Replies View RelatedI have many, many cameras and have used Photoshop and Bridge for years. Even though the latest updates for Camera RAW says it can handle the T4i, I tried opening these files on two separate computers, both running Win 7 64 bit, and my having Photoshop Extended 5+ 64 bit on both computers.
I tried reformatting the camera card, wanting to eliminate that as a possible problem, and the same problem exists.Camera RAW will recognize all of my other cameras, the D Mark III, T3i, Nikon D2x, D3, D3X, so on and so forth, but not the T4i.
I stopped short of doing an image restore on that machine, thinking my installation of Photoshop must have been corrupted when I removed Elements and Preimere Elements, but no...I'm now on an IBM W701 with the same software and I have the same probem.
"Ignore rotation metadata" preference is not working with Canon. PS does not ignore it.
View 8 Replies View RelatedI have just installed Adobe Creative Suite 3 Design Standard on my new MacBook Pro. I have activated it. However when i start Version Cue CS3 and check for updates i get the message "No Internet connection. Please check your Internet settings and /or firewall. Waiting for connection...". I have turned off my firewall and the antivirus program and I still cannot get it to work.
I also cannot start Photoshop CS3. When I open the application a blank window titled "Adobe Design Suit Standard CS3" appears as well as Photoshop toolbars which I cannot select. All the options on the toolbar is greyed out and I cannot select any of them. I have to force quit the application.
Im playing around with the 'recolor artwork' tool but cannot seem to find the colour group for my existing image [URL] ....
I thought there might have been a feature where cs6 lists the colours in the 'current colours' drop down list.
Yellow, pink and blue are the ones that have automatically appeared but i cant see my current colour group.
I vectorized this image from a jpeg and saved the vector as a PNG, then reopened it.
I've been using PS7 for a few years and have never had this problem. All of a sudden, when I try to type text it's not showing up on the screen. I can see the text I've typed in the Layers palette but not on the page. I've rebooted and have no viruses. I'm running Win XP Pro if that info is needed. I have a feeling I've accidentally hit a command button or something that's caused this.
View 3 Replies View RelatedI use the save as version very often as I work on images. But lately I have found that it is not available and is Grey'd out in the File Menu.
I cannot understand why this should be! And if I check the Save As Copy box, as we all know, this doesn't work.
I'm running the latest version of Photoshop CS 9.0.2 or something like that (downloaded the update the other day).
I started with V6. Currently using trial of X4. Got a Canon T2i for Christmas....mostly for HD video. Never have worked with HD video before so not real familiar with file extensions etc. However I do know that HD video is a different animal altogether…..Very large files and some program issues.
Took some test video in 1080p… about 30 seconds. Files are in MOV format. Drop the file in program and hit play on the preview pane. Very choppy and stuttering. Make sure smart proxy is enabled and it is. I then save the file as a 1080p AVCHD. Now…. that file plays just fine in the preview pane. Another thing I tried was converting the MOV file into an AVI with a free program called Pazera Free MOV to AVI. That conversion with an AVI extension also had the choppy issue. Should I convert the files first from MOV to AVCHD or is there another HD format that is better?
I can't open my cloud version of PS CS6, I had a box asking me whether I wanted to supply Adobe with feedback or something, I closed the box and ever since PS keeps crashing. It tries to load but as soon as the interface is loaded a blank white box appears and then I get the spinning wheel of death and am forced to quit.
View 2 Replies View RelatedI installed LR5 from LR4 yesterday and each time I open an image in CS5 from my LR5, I get the following message:
The document "IMG_9082.CR2"has an embedded color profile that does not match the current RGB working space.
Embedded: Adobe RGB (1998)
Working sRGB IEC61966-2.1
What would you like to do?
-Use the embedded profiel (instead of the working space)
-Convert documents's colors to the working space
-Discard the embedded profile (don't color manage)
My camera's settings have it set with sRGB, LR4 and LR5 have sRGB and I have CS5 workspace as sRGB. This did not happen before.
Is it possible that when LR5 updated the LR4 catalogue, it changed the profile of all my photos? I don't know, maybe I've done something, but I can't see what as I don't remember changing anything.
Do other people have an issue in Photoshop Elements 12 with it not consistently saving photos in version sets? someties it works correctly and somethimes it doesn't and it also bumps me out stating it is a new photo. i do have it configured to always save in version sets and to not notify me with new photos?
View 4 Replies View RelatedMy Basic GPU features were working flawless with Photoshop version 13.0 After I update to version 13.1 for CC members all my GPU features stop working. Is there a form to set my Photoshop version 13.1 in order to use my GPU features or there is a huge difference between versions that doesn't allow me to use the GPU features?
View 5 Replies View RelatedX4 SP2 is supposed to add RAW support for the Canon S100 and Panasonic FZ150 cameras (I own both.) However, after installing SP2 neither of these RAW file formats can be edited. I tried dumping the Temp folder, but no joy. I tried calling Tech. Support and all I get is "Tech Support is not Available at this time." In the middle of the work day?! The About popup says I'm running Ver. 14.2.0.1. I'm not sure the update has taken.
View 14 Replies View RelatedI just loaded Elements 11 onto my windows 11 laptop and imported about 15,000 photos. I was really looking forward to using the face recognition for tagging the photos but it does not seem to work. When I click "Mark Face" it always says people analysis is yet to be run and when I click yes to run it, nothing happens. Same thing when I click "Add People+", it just flashing something quickly on the screen and then nothing happens. I have "People Recognition" checked in the view screen and "Analyze Photos for people" checked in my preferences.
View 7 Replies View RelatedMy Lightroom 3 has just stopped working. It was version 3.6 and when I went to use it yesterday it just shutdown on me and threw me back to my desktop. I removed it and reinstalled it but the same thing happens.
View 6 Replies View RelatedWe are moving from AutoCAD Map 3d ver 10 to ver 11. There's a lisp routine I use all the time and it doesn't seem to want to work in the newer version 11. this routine is supposed to fill but like I said doesn't work in ver. 11.
View 1 Replies View Relatedi am usually getting "Fata Error " while working, it comes normally 5-6 times in a day and its so irretating to shut down the autocad and restart the whole thing.
i am using below config system
Intel Core i3/ 4GB/ 500GB HDD/ 1GB NVidia Card/ Gigabit Lan/ Windows 64 Bit OS
i have installed Autocad 2012 3D 64Bit version. and my file location is on network with attached NAS connected on 10/100Mbps Network.
there are totally 7 desktops out of which 3 pc's are having 3D License and rest 4 are having 2D License.
Remember all my data stroed on my NAS and all 7 users access from netwrok to modify and editing of my Autocad files size not more then 200-400Kb
attached snap shot of error generated on screen.
how can i know if the current view/display is align with the current ucs?
let's say i have rotate the ucs about z axis 45 degrees and make it plan now i draw some things and then i change back to world
worlducs = 1
viewdir = 0,0,1
ucsxdir = 1,0,0
ucsydir = 0,1,0
but the display is still in the ucs z 45 (ucsfollow = 0) set the view to PLAN current (now the view is aligned) but the system vars does not change.
For a plan UCS, you would need to compare the VIEWDIR system variable and the cross product of the UCSXDIR and UCSYDIR system varaibles.
[URL]
Is there a macro/script/deisel that will automatically print a pdf (cute pdf autocad lt 2007) to current plot settings in current drawing directory and give it the current drawing view name and number? Disk space not a problem these days and would save time to have a pdf copy of all drawing tabs readily stored in the directory ready for issue.
View 3 Replies View RelatedTechnique that can check the current plotter name for the current tab and assign it to a variable? i.e. can it be assigned to a variable to check if if equals "myplotter1". The next step - is there a technique to change the plotter name to "myplotter2.pc3".
I have partially done the latter part of this in the past using the -plot command line to ASSIGN a new plotter but I would really like to only run the routine if it really needs to.
The company I am working for has the old 2000 version of AutoCad. They send me drawings with blocks and attributes. But when I start working on them the system will lock up and not let me do anything else. I can maybe get two or three commands in then it will lock up. It doesn't even let me send a C.E.R. (customer error report) I have downloaded all of the service packs and the hot fixes but the problem persists. I don't where to go from here. My co worker thinks it may be a memory problem but I doubt it.
View 2 Replies View RelatedAlign Objects feature is not working in trial version of Illustrator CC. Brand new MacBook Pro, have tried rebooting etc. Is this a software bug or a limitation of trial version?
View 5 Replies View RelatedI have 1 Next button that is used on the timeline. Each position has a pause then a play so there is only 1 button. I need to get the label info so I know where I am so I can save the location of the timeline that the user was at if they exited before they finished the process.
View 6 Replies View RelatedThe text on photoshop is no longer working on my version, well it is but its tiny even if the size is englarged?
I know this is probably a daft question but I havent changed any settings at all and this happens?
I recently downloaded and installed the latest version update. Everything seems to be working fine. However, one thing is not. The Set line width box in the flyout menu does not allow typing in a custom number. I thought it might have been a problem with my Cintiq but it is the same on my main monitor.
The Set line width box in the main toolbar works fine. But the one in the flyout doesn't work. I can select a setting from the dropdown list but just can't type in something like 1.5. It doesn't matter if I use my number pad--with the numlock on--or the keyboard numbers. Another strange thing I just noticed, when trying to type in a number in the flyout box, I cannot type 1 or 2 or a period but I can type in 0,3-9 although none of these changes the width of the line.
This worked okay in the previous version so perhaps it is a bug in the new release? (7.1.2.18680)