I have a picture of a bike frame that I'd like to change to different colours as and when I need to. I've tried the lasso tool but run into problems when I try to do multiple selections. I need to do 3 selections, 2 inside the frame and 1 outiside of the frame. The problem is when I do the outer lasso selection it won't let me do any of the inner ones.
View 4 Repliesi am trying to make multiple selections using the magnetic lasso and i cant figure out what im doing wrong. first, i have selecte d the outer perimiter of the object. next, i tried to select the holes within the object for a clean cut out by using the shift key but after i finish my selection and release the shift key my selection doesnt turn into marching ants.
View 1 Replies View Relatedi have tried every tool there is for this bike but i cant seem to get a clean extract for it. the wheels are never round and the handel bars just dont look right. How would you guys do it my last idea is to try the quick mask to try and do it but the colors are so similar i dont think thats the way to go.
View 4 Replies View RelatedIm going on a "lads holiday" in 2 weeks and i have been given the job to create tshirts for the group. I used a shield design base from a video game and i am now creating new silhouettes for the different sections of the shield to reflect the holiday. Ive been trying to make a quad bike silhouette but every time i do it it comes out so badly that you cannot tell what it is actually meant to be.
View 1 Replies View RelatedI want to incorporate a rigged character along with a rigged bike, so that when the bike runs or jumps through a rough terrain, the character will react to it dynamically. The character should be able to move as per the bike's movement, as would happen in real life.The character should react to the suspension of the bike.
Please check out the video for reference.
Required 2d Model human on bike dwg file from front side and from backside, how to get this dwg file.
View 3 Replies View RelatedIs it possible to repaint, let's say, a blue front fender of a motocross bike and turn it into pink?
View 4 Replies View RelatedI have an aluminum frame system that is comprised of 9 seperate extrusions, what is the best way to handle this? I would like to get a BOM that shows each each seperate extrusion with cut length.
Must I author each of the 9 shapes separately , then separately apply them onto the frame and then adjust each of the end conditions accordingly?
For initial experimentation I created an .ipt in which I have a sketch of all 9 shapes, I extruded them all separately (multibody) then authored the combination of all shapes as one frame gen shape..
This allows me to easily apply the member and create the appropriate end conditions, but does not give me an accurate BOM.
I am currently working on a game and am pretty new to the world of Maya ( 2D animator gone rogue!), I have some animation that I am cutting and I have noticed something I find strange. There seem to be multiple keys inside one frame ( see pic). I am guessing this is something extremely obvious that I as a new user do not understand, how to edit these keys within the frame?
View 1 Replies View RelatedI'm thinking about changing the frame color (the red part) to lime gold - but other color suggestions as long as they look good with the orange fenders/plastics and chrome!
View 7 Replies View RelatedI have a frame that hinges. I have built the two halves separately then placed them together in an assembly. Is it possible to have preset rotations from say open to closed? Similar to level of detail where by I chose which position the hinge is in?
Open
Closed
I'm trying to make a slideshow GIF with about 12 pictures. The problem is that when I convert the image from RGB to indexed, the quality of the pictures are horrible (dithering didn't work). I tried isolating 1 picture from the other 11 layers, and converting it to indexed had great quality.
Correct me if I'm wrong, but I think the problem is that the color palette is too generic, since the palette has to include all colors needed for all 12 pictures
According to wikipedia, the GIF "allows a separate palette of 256 colors for each frame".
Is it possible to create GIFs with separate color palettes for each frame?
In older versions of Autocad when you created a viewport and locked it, the frame around the viewport would change color so that you knew if it was locked or unlocked.
Is there a setvar or something that needs to be set so that when you lock a viewport it's frame color will change???
Civil 3D 2014
what/where is the pref to change the color of wire frame of a selected object- I'm trying to use the unwrap uvw and the fragile, winsome pale blue of a seam doesn't show up against the peak white of the wireframe.
(I must say my whole experience of 3dsmax has been awful because I can almost never clearly see what I am doing, as the whole interface color scheme is horribly designed)
here's a pic - spot the seam - this is in hidden line mode as you can/cant see, the pale blue line of the seam is blown out by the wireframe.
I create animated gifs frequently using the Frame Animation pallet. The default frame rate starts out as 10 seconds, so I always have to change it to 4 seconds. Is there anyway to reset the default frame rate that I start out with to 4 seconds, so that I don't have to change it every time?
Preferences did not yield any promising menus
I know the standard default reset with many Adobe products is to change it without a document open, but in PS CS5.5 if you do not have a document open the frame rate option is greyed out
______________
CS5.5
MacPro Tower
Mac OS 10.8.2
I am trying to add a frame to some pictures, but when trying to apply a frame from the content section, the frame goes on top of any picture...and not directly on to the picture.Â
View 2 Replies View RelatedI am currently trying to combine a color photo frame with a black and white image, but every time I open the frame in "open as layers" the frame turns to black and white as well as the photo. I have no problem when using color photos. Is there a way that I can do this so that my photo frame remains it's original color with the black and white photo inside.
View 1 Replies View RelatedHow do I creat a frame inside a frame? Elements 4.0
View 2 Replies View RelatedI have Photoshop 7, Monaco EzColor, NVidia 6800 card with a control panel, and a SyncMaster 193 Plus digital monitor with control software. ALL of these can change the monitor qualities. I use Monaco to profile my scanner and printer - it does a great job; it can profile the monitor also.
My question is:
what would be the best overall CM system - which combination of controls (or which one)would be best (the monitor control utility has stopped working and I have turned it off).
I am editing a short avi clip converted from a 1959 8mm film in the timeline. The telecine conversion results in as sharp an image as I have manged to get using PPro 5.5 unsharp mask. I tried mocha planar tracking to automatically remove a fixed spider web on the top edge of each frame in the clip. Â
Because the web is not distinct and the background does not progress at a steady fixed pace, the mocha procedure was not successful. Previous feedback recommended methods to mask the edge. Using various masking attempts to automate the procedure was also unsuccessful for the same reasons as mocha.
Â
I have the time and decided to replace the spider web on each frame edge using photoshop tools e.g. clone stamp etc. - although other tools such as healing brush do not appear to work in the timeline as I expect.Â
My saves so far have resulted in a whole clip being saved with all following frames being modified similar to the first edited frame. Perhaps I am not using the editing procedures in photoshop from the timeline correctly.
Â
How do I save frame by frame in the timeline?
My band has just recorded our first music video. We are very happy with the result except that the glasses on me (the lead singer) during the close-ups look very funny, they are very skew, and the "frame" does not go behind the ear.
What I would like to do is to import the video and edit these clips frame by frame, where this is showing. There is about 15 seconds totally of me in close-up - 15 x 24= 360 images. The clips are about 1-3 seconds long. And I want to edit all of these short clips of me and then make it a full-length video again.
I made a quick edit on one of the images from the video. The shades still look a little funny but it gets better when the frame goes behind the ear. If it's possible to correct the "glass" part of the shades as well.
I have 240 layers which are the frames for an animation. The animation is of a rendered CAD model on a white background. I want to change the background color to a specific RGB color (or transparent) to match the website bg.
Â
Is there a way I can replace one color with another on multiple (or all) layers in one operation? I'm using Photoshop CC.
I have a following problem:
Picture of a wardrobe with doors.
I would like to make 200 versions of this wardrobe with 200 different colors of the doors
So the effect should be: 100 files , each file contains a picture of a wardrobe with a different door color.
Is it possibleto automate the proccess, I cannot imagine I have to do all the color changes by hand for 200 versions.
Is there a way to run auto color on multiple pictures from bridge? I have a yellow cast on many pics and want to fix them all at once.
View 2 Replies View RelatedI have to deal with multiple layer documents for producing underwater mosaics. Very often, the images vary in colors a bit. For large mosaics, I run the images thru a batch job before I use them. For smaller mosaics (e.g. just 10 to 20 images), this is a bit of overkill, in case I have to tweak just 5 or 10 or so.
Â
In this case, I prefer picking one of the 20 layers as my "reference" and manually match the colors of those layers, that need the match, one by one.
Â
My question now: Is there a way, that I could select, lets say 10 layers that need the match and apply the Match Color to all of them in one go?
I am working on a graphic that has a circle with many small circles around it. All the circles are on seperate layers and were made with the shape tool. How can I change the color in all the small cicles at once? Isn't there a way to chage the attributes of multiple shapes at one time? I swear I saw this somewhere in my books but cannot find it now.
View 4 Replies View RelatedI searched the forums briefly and couldn't find an answer to a couple annoying problems I've been having with Photoshop. I'm running a PC with Photoshop CS2, which is part of the entire creative suite package that I recently purchased. Here are the two issues that I’m trying to tackle.
1) Combining multiple paths
I have a picture of a car and I’ve painstakingly traced a path around the outer perimeter, but then there are other areas that I’d like to include as part of the same path and I can’t seem to find out how to make this happen. Just to be clear, I select a path around the outside of the car so I can place it into a new background, put in some shadows, etc.
But, when I try to select other areas of the image to include as part of the path (say between the spokes of the wheels) so the new background shows through as well, it creates a separate path. I’ve yet to figure out how to combine each into a single path file so when I attempt to create an effect, I don’t have five different paths to tackle. A similar scenario cropped up (pardon the pun) when I try to do a radial blur on the wheels and a motion blur to create the appearance of motion. I simply can’t figure out how to get the paths into a single file.
2) When manually adjusting levels of an image, the three eye-droppers that allow you to set white, grey and black points can be used, for example to select which part of the image should be the brightest white (in the case of “set white point”). When I use this eye dropper, it keeps changing the foreground color in the toolbar.
Does anyone have any ideas on how to prevent that from happening? This is rather annoying because when I try to expand the canvas size and I’m expecting it to be white, it ends up being and off shade of white because it picked up the color of the background that I selected as what should be the brightest white in my image. I know the long work around, but am I missing a default setting that would prevent this from happening?
I am using Photoshop CS5 and am creating a photo montage poster with about 30 images on it. The photos are not stellar and I need to change levels, exposure, saturation etc to each image. I was creating groups from layers for each image then dropping it onto the montage file, but I see that filters effect every layer below.Â
I have a gradient layer as my background and I don't want it affected nor do I want every layer below affected. I created smart layers from each image, that works, but it really slows the system down. What is the smartest and most efficient way to handle this?Â
After using Custom Profile for Frame Generator, the Part List will show total length, not individually. How to split these frame members?
View 2 Replies View RelatedI created an extruded aluminium profile (attached file: Item Profile 8 80x80) which I published into the Content Center. When using this profile in a frame design, and using the Trim To Frame command, the profiles are trimmed at a weird angle (attached pdf file).
View 2 Replies View RelatedAfter using Custom Profile for Frame Generator, the Part List will show total length, not individually. how to split these frame members?
Inventor Professional 2013 SP1.1
Windows 7 Pro 64-bit, SP1
HP EliteBook 8460w; 8 GB RAM; i7 - 2.0 GHz; AMD Firepro M3900 -1 GB