radial gradient on the same layer. I was watching a tut and im pretty sure he was doing just that but he didnt say how he was doing it. I tried the ctrl,shift,alt buttons combinations but everytime it just gave me a new gradient not adding another.
View 6 RepliesI'd like to select the whole gradient that I have created on its own layer. So I cmd-click (Mac) on the layer's icon. But after doing this not the whole gradient is selected but only the darkest part of it!
With every other layer it worked so far... But not with gradients...
I have done the following so far:
I have two layers, the one below contains the backgroundcolor and the one above contains a transparent pattern (the stripes) which I defined before (another question: do you know sites containing nice patterns/brushes/sets/gradients for PS for free). no I would have to make a gradient on the top layer to fade out the pattern ...
I'm trying to apply 2 gradients on a single layer. When I applied the second gradient, it replaced with the 1st one. Is that possible to do so without having 2 separate layers?
View 2 Replies View RelatedI am trying to fade the left section of a PSD image I created so that it gradually fades to nothing using a Rectangular Marquee.
The problem is that I cannot get the gradient itself to change after I have used the Gradient Editor to make it 90% Black on the left & 10% gray on the right.
Seems this color choice in a Layer mask would have the desired effect, but after editing the gradient still it looks & works the same as the default. (No Change to the Gradient)
Can someone explain to me how to customize the Gradient in Photoshop CS?
I cannot use gradient tools on selected layer on object. What is that issue?
View 4 Replies View RelatedWhen I apply a gradient to a shape layer, the gradient is always applied as a rectangle.
e.g.
The red rectangle implies the edges of the gradient. It's a horizontal gradient.What I'm after is for the gradient to be applied in a way that uses the shape layer for the edges... so the same value will be applied evenly to the left side of the shape and then spread evenly to the right. Is this possible?
I found a photoshop file somewhere on the net and the really fascinating ting about it was one of its gradient layers. I has a behavior I have never come across yet, because whenever you remove certain parts of the layer mask, i.e. paint the bottom half black for example, photoshop adjusts the gradient to the remaining opaque part of the layer.
View 1 Replies View RelatedI want to combine two photo's and have a gradual transition. So I move one photo into the other, select layer mask, then gradient, drag left to right, and presto I have a nicely merged photo. However I would also like a gradient from Top to Bottom (and left to right) on the same photo. How do you apply mutliple gradients to the same photo? If I select gradient again, it just overlays the first. I want two or more gradients.
View 5 Replies View Relatedi'm trying to fade out the last few inches of a photograph so it blends more seamlessly into backgrounds it's placed onto.If I use the gradient tool, set to "Foreground to Transparent" I get the proper effect, but instead of fading to transparent it fades to white.. which dosen't work when I move the layer over a coloured background.
I've read and watched many tutorials on this, and they all say to create a layer mask, and then use the gradient tool.. but for some reason anytime I have the layer mask selected the gradient tool won't work at all..
I don't like the radius of the gradient fill of my shape layer in Photoshop. I cannot find any hints about how to expand the gradient fill to cover a different area inside of the shape layer.
How can I transform gradient fills of vectors shapes in PS?
How to use the gradient tool more than once to add to a single layer mask? Tried all the modifier keys, nothing seems to work.
View 2 Replies View RelatedI have a Hue/Saturation layer with a vector mask applied, and I'd like it to fade from 100% transparency to 0% transparency. How would I do this? I can't seem to work it out.
View 2 Replies View RelatedOn screen this show when doing a simple layer mask fade with the gradient tool. (notice the hard transition in the black) The if I flatten it it looks fine, like this.
I don't understand why all of a sudden it is doing this, same with brushes. Just seems to happen in the layer mask which is really deceiving.
I've been using Photoshop intensely this year for school assignments, and I'm learning to get around very well. The issue I'm currently having is that it want to make a layer mask that fades from the mask to the image behind, from color to transparent to create a smooth transition.
I've attached a sample image of what I'm trying to do. Just note, I used a very round-about method to get this image, but I want to achieve the same effect with a vector mask.
I have cannot paint in black to conceal on a layer mask. I have "NORMAL" mode set and the foreground color is set to black. When I paint or use the gradient tool in "normal" mode with black it paints to transparent.Before the upgrade it was normal. I have this problem on both CS6 apps pc-and-laptop.
View 4 Replies View RelatedI was just starting to experiment with the gradient tool last week. I could have a circle as the selection, use the gradient, and then it would make the gradient within my circle all nice.But now whenever I try to use the tool, it fills my entire layer with the gradient instead.I know I still have the circle selected.
View 1 Replies View RelatedI was trying to teach myself to use gradients the other day... And now when I start a new project and try to paste in a photo as a new layer, it pastes as the gradient instead.
I have opened up both the gradients dialog and the gradients editor but cannot turn it off. In fact, when I open a brand new (empty) file, I can see the gradient attached to my pointer (mouse).
I'm relatively new to using paint.net for original image creation from scratch. I've been doing a few of the tutorials on the forums as way to learn how and I've run into an issue with "atmosphere" glow in the many planet tutorials.
I've been making a mars like planet as an experiment however when I create and atmosphere glow I can't create a glow which is more pronounced on the light ward side of the planet but not visible on the dark side of planet similar to the atmosphere in this image
[URL].......
I've created a separate atmosphere glow layer however I can't seems to limit it using a gradient tool on the darker side. I just get one continuous glow around the whole edge of the sphere.
When converting a vector or Illustrator file (such as a logo) into a shape layer any gradient fill is lost. Is there no way to ensure the gradient fill is converted across or is this a matter for a future release of After Effects?
View 2 Replies View RelatedI have a multilayered psd file. All layers should remain opaque except the black to white gradient layer where I need the white to be transparent. So that when I place the final psd on top of a block of solid colour in Indesign the gradient shows the background colour through where the black fades off.
View 4 Replies View RelatedIs it possible to create a gradient similar to radial gradient, except that the shape is other than circular? This image would be the starting point, but I would like the white part fading to black to be another shape (say, a rectangle, a banana, etc.).
View 5 Replies View RelatedI've been experiencing problems with the Gradient editor since I got PS and the problem is that whenever I create a gradient through the gradient editor and then load it, it does load it and instead just duplicates the ones that already exist.
I save all gradients at:
C:UsersRHAppDataRoamingAdobeAdobe Photoshop CS6PresetsGradients
However it does (mostly) work when I import pre-made (from web) Gradients.
I don't know why this happens but it also did the same thing when I had CS5.5!
I have CS5. The bugs and broken features in AICS6, make it unusable in my workflow.
I am specifically concerned about the inability to drag global color swatches from the color panel to Gradient stops in the Gradient Panel. I use this method to update a gradient color because I find it MUCH faster than option-dragging to duplicate a stop color, then deleting the unused stop. Since I do this constantly, I find using CS6 very tedious.
It appears that the Layer Filters functionality is broken again with 2013. Unchecking the "Apply layer filter to layer toolbar" disables the function of layer filters in the tool palette.
View 5 Replies View RelatedI have found that when I use the Layer Styles on one layer and then make a new layer or select a shape that creates a new layer that when I go to add Styles to the new layer/new shape the previous layer is affected by how I set the Bevel & Emboss, Direction, Altitude, Drop Shadow etc etc.
For instance, let's say I have a ...
BG > New Layer > draw an ellipse and then add a Bevel with an > Angle of 89 and an Altitude of 30 and then I add a New Layer > open the Styles and go to change the Angle to say +89 or whatever and the Altitude to say 45 ... the first Layer/Shape Effects change.
How I can keep one Layer from being affected by an other Layers Effects'?
I have found that if I Rasterize a Layer Effect that I can add a "double" effect on the same layer but I haven't tried the to do this with separate layers. However, for most of the work I am doing I cannot use the Raster because everything needs to be true vectors.
I have a Dell Laptop/Windows 7 Home Premium that's a 64 bit
It looks like a thumbnail in center of layer with the box thing around it...And the paper I'm placing on is 12x12 or 3600x3600px.
View 2 Replies View RelatedI'm adjusting a photographic image and am using both a filter effect and a layer style in the same layer on a Smart Object. I want to separate the two effects into two layers, so one layer has the filter effect (Nik) and one layer has the layer style (Color Overlay) (with the goal of merging/rasterizing the Nik filter effect with the Smart Object but keeping the layer style unmerged). I can make two layers and move one effect without problem, but the visual result of each effect on a separate layer is quite different from having both effects in the same layer. The Blend Mode for all my layers is Normal. Within the Color Overlay panel, the blend mode is Linear Burn.
Layer 1: a layer style and a filter effect, stacked
looks very different from....
Layer 2: a layer style
Layer 1: a filter effect
Upon trying to open a line sheet i'm working on, photoshop tells me:
Problems were encountered reading layers
"..."
"..."
"..."
Because the layer is not a valid layer. Some layers will use existing pixel data.
I have two maps of same area (different years) and I want to match them up as one map. I can load them both as layers and make the older map transparent so that I can see through to newer map, but older map is larger than the newer map (in the background). I can move the transparent map but I cannot make just the transparent map smaller to fit over the other map. I will also need to rotate the map slightly. When I try to resize it changes both maps. I have tried the transform and the move tool. So how can I make one layer smaller and rotate it it leaving the other layer intact?
View 2 Replies View RelatedIs it possible to lock a layer within a document and password protect that specific layer?
View 3 Replies View Related