I just installed Windows 8, and while it was very confusing I accidentally deleted all of my programs (I got confused with what the Reset Tab was) and when I went to go and install Photoshop Trial, it's telling me I need to update Adobe AIR because It's not available to my system.
I've installed it before, the only change was from Windows 7 to Windows 8, and I've seen other people with Windows 8 use Photoshop CS5?
how I would install the RAW codec for CS3? I looked at the instructions, but I do not have "c:Program FilesCommon FilesAdobePlug-InsCS3File Formats" since my Photoshop is installed on the D Drive. I tried adding the plugin to "D:Program Files (x86)AdobeAdobe Photoshop CS3Plug-InsFile Formats" but that didn't seem to do anything (after closing and reopening Photoshop, it still says that it can't open the file).
View 3 Replies View RelatedDownloaded LR 3.6 yesterday. Installed. (To upgrade from LR 3.5). It damaged all USB drivers on my PC (XP Pro 32 bit). Still working with Dell tech support to resolve. Now installed LR 3.5 will not open. After system restore to day before yesterday, message that "Adobe AIR is damaged". What is AIR? How do I get LR back up & running right?
View 2 Replies View RelatedIt is not in the control panel on a clean CS3 install. Has Adobe stopped including Adobe Gamma in the CS3 installations?
View 39 Replies View RelatedHaving installed Adobe CC. My Nik filters have dissapeared how I can reinstall them ?
View 2 Replies View RelatedCS6 Adobe Photoshop Extended (64 bit) installed on Windows 8 will not update. Adobe Application Manager opens with message as shown below. I use Kaspersky Internet Security which I am not very familiar with as yet. I tried to update after turning firewall off without success.
View 4 Replies View RelatedI bought Adobe CS2 a few years ago, but my computer died and I've been trying to put it on my new computer with Windows Vista.
Mainly, I'm just trying to get the Photoshop to work, but the other programs would be really nice as well.
Every time I try to start photoshop, this error message comes up: "Your Adobe Photoshop User name, organization, or serial number is missing or invalid. The application cannot continue and must now exit."
is it possible to install adobe bridge only?
View 2 Replies View RelatedI was gifted cs4 extended and when trying to install it says the database is corrupt.
View 9 Replies View RelatedI'm having problems opening photoshop CS3 after a clean install. I have deactivated my CS3 product on my old computer, that run on windows XP. With my DVD installed on my new computer that runs on windows 7. After the installation, I tried to open photoshop to activate. When the program stats to open and freezes almost instantly. I have to open the task manager to close the program that appears not responding.
My new computer is a Workstation, S5000XVN Intel motherboard, 24 Gb of Ram, NVidea Quadro 2000.
Just wanted to know if there are any problems installing Adobe Photoshop CS5 in Windows 7 Home Premium 64-bit?
Planning to purchase a laptop that comes with the OEM license and plan to use 64-bit OS to maximize the 8GB RAM of memory. Just afraid if there are known issues for this type of installations.
I have a brand new Dell desktop that runs windows 8. I installed the Adobe Creative Suite 5.5 Master Collection and got a message saying that there were errors during installation and some things might not work properly. I uninstalled and did it a second time. Same message.
I then spoke with an Adobe agent who told me to download a program to detect what the errors were. He said they were minor issues and shouldn't affect the programs. I then spent hours today speaking with Dell on the phone and the rep took remote control of the computer and did a diagnostics check on the hardware. He said everything is fine. I asked him if it might be the video card needing an update so he ran an update. Same issues, no change.
We changed the compatibility to windows 7 and still no change. I then uninstalled the creative suite and tried installing it from the desktop. Still same problems. These are the issues in Photoshop:
1)When using certain tools (transform tool, crop tool) the images goes completely black.
2) The background switches at random- sometimes checkered, sometimes grey, and sometimes black.
3) Color saturation is incorrectly represented. It switches whenever it wants. For instance, when I zoom in and out it changes.
In Adobe Bridge some of the RAW images don't show in the program. Some I just can't open. Others open fine. Those images will open in Photoshop but not in Bridge.
II had 512megs of memory and occassionally had out of memory issues in photoshop.
So I spent $100+ to get 1 GIG more and now with a total 1.46GIG's of RAM installed and I STILL get the famous error
"Could not complete your request because there is not enough memory (RAM)"
In fact, I am getting MORE out of memory errors in photoshop with 2X more RAM than I started with..
I originaly had the default 50% ram given to adobe.. and then tried 75% and still get the errors 90% of the time.
I checked windowsXP Task Manager Processes and indicates that photoshop is using no more than approx 300-400megs of ram with approx 1010megs being given to photoshop, YET according to Processes, photoshop.exe is only using between 41MEGS - 400megs.. Processes claims a Commit Charge of "2244M/2688M"
Adobe recommends 384Megs of ram.. If that is the case, HOW can I be running out of memory if I have 1.4 GIGS?
Cache is set to 1.. I've tried up to 9..
The computer:
CPU: Pentium 3.0 GHz
RAM: 1.46GIGs
I've just installed Extension Manager Update 6.0.5.9 yesterday and today I've get a wired problem with my bambo tablet.I've used this tablet for 3-4 years without problem. The problem I've now is when I drag lasso tool on an image to make selection it doesn't make a selection even it is showed in the history state that I've used lasso,or magnetic lasso.
My machine is a Mac Pro 2010,Quad-Core Intel Xeon running on Lion 10.7.5 and my bamboo driver is the latest version 5.3.2-2. Even now I've change to use freeform path I've still cannot change form path to selection.
Well this is the error I am getting when I try and install Adobe Photoshop CS 2 so I am at a loss as I cant find any help.
View 3 Replies View RelatedMy Problem:At the end of installation of Adobe Photoshop CS4 (Trial) i was prompted with en errormessage stating some of the components were not installed. When I check the more information button provided in the error message window, it showed below error.“Adobe Photoshop CS4 English Language Pack Error: Error 2.”Still I could find the installed Photoshop in C:Program filesAdobeAdobe Photoshop CS4Photoshop.exeWhen I executed above file; application showed below error message and close it.“Some of the application components are missing from the application directory, Please reinstall the application.”I just try to run Adobe Device Central CS4 which was installed along with it. It showed below error message.“The Localized resource files for this application could not be loaded. Please reinstall or repair the application and try again.”So My Problem is I am unable to open Photoshop CS4 after its unsuccessful installation.I spent more than a day in different ways as I explained below in more info section. I am desperately looking for helping hands to fix this problem.I ever find this kind of difficulty with any other components installation in my 10 years of development experience. Please help me.More info:(1) I have downloaded Adobe Photoshop CS4 (Trial) in this month (July 09) from adobe official site.(2) My PC OS Windows XP SP3.(3) Prior to install Photoshop CS4 I had Acrobat reader 8 and Adobe DW CS4.(4) After I read some stuff on net, I downloaded both Windows install Clean up and CS4InstallerDatabaseUtility.exe.(5) First I uninstalled all DW CS4 and Photoshop CS4 using add/remove then rebooted. then ran CS4InstallerDatabaseUtility.exe (which really did not removed as it did not find any Adobe component), then installed Photoshop CS4. No luck. same error.(6) This time I ran CS4InstallerDatabaseUtility.exe and removed DW CS4, Photoshop CS4 and flash and rebooted. Then I ran Photoshop CS4 as Administrator. Same thing repeated at the end of installation and when I tried to open the photoshop.
View 5 Replies View RelatedWhen installing the trial version of Adobe Photoshop CS3, I get an error message saying that there has been a "fatal error". What is the problem? I have re-downloaded the exe more than once, closed all programs, etc.
View 1 Replies View RelatedWhen installing Adobe Photoshop CS3 on Windows Vista I get this error "Setup has encountered an error and cannot continue. Contact Adobe Customer Support for assistance. Internal Error 2739" I have used the cleanup script included in Adobe Photoshop CS3 installer, and have removed all traces of Adobe apps including the beta versions and Acrobat 8 pro, and I still get the same error, how can I install this application? is there any way or do I have to reformat and reinstall windows?
View 39 Replies View Relatedcs6 upgrade is installed, do I need to keep CS4 installed?
View 7 Replies View RelatedUsing Photoshop CS6 on Win7 64bit on a brand new machine with 'more than average' specs, I seem to be unable to use any tool that requires me to hold my left mouse button.
- I can't make selections using any marquee tool
- I can't draw using brushes
- I can't draw shapes (I immediately get the 'Create rectangle' popup, as if I released my mouse button)
- etc
Furthermore, I can't reverse the zoom direction by holding Alt.I've reset my preferences to the factory default by deleting Adobe Photoshop X64 CS6 Prefs.psp from the user settings, this does not seem to solve the problem.
There is an exception to the above; sometimes (not always) I can selections on a fresh start of Photoshop. This ability is lost as soon as I use any other tool. it doesn't seem as if another application 'steals focus', as I can always select other tools by using their shortcuts; that would not be possible if PS wouldn't have focus.
I use a Mac Pro 2x2.66 Dual Core Xeon tower with 15 GB Ram and OS 10.7.5. CS6 (always the latest update) is becoming very "buggy". It starts slowing way down, then does things like sharpening changes in ACR disappear when the photo is opened as a file in Photoshop, and other random little failures. Resetting preferences in both Bridge and Photoshop doesn't fix it. The only thing that works is re-installing CS-6.
View 1 Replies View RelatedI have been having an issue with CS2 for some time now. Every time I connect an e-SATA external hard drive, the message pops up saying "the licence configuration data is no longer usable. Click OK to continue".  A new popup window appears, with the message: "Your 30 day period to use Photoshop without activation is over. Code:
View 9 Replies View RelatedIn PS CS4. On XP.Why do I receive this message? & When the font changes, it moves the text. Why would this occur?The file was designed in PS 7.0. Does that matter? I didn't think it should if that is the problem.& yes I am having that Arial Narrow problem, but I won't get into that.It is not reading my Tahoma font either.
View 1 Replies View RelatedI calibrated my monitor and is using sRGB as working space in photoshop cs2.
If I open an adobeRGB tagged photo, photoshop says profile mismatch. If I choose to convert adobeRGB to sRGB, would some colors get clipped by the smaller sRGB space?
Suppose I want my working space to be adobeRGB, what are all the color management related things I need to change, in addition to choosing adobeRGB as the working space in photoshop? Do I need to change the monitor calibration process?
When i open my psd file it says that the some text layers might need to be update. When i press the update button i get the message "Selected font failed during last operation. If problem persists, please disable the font". If i click "no" the file opens, but all text layers has a exclamation mark and a tooltip that says "font is present on system but requires a layout change"
I have create the PSD file using the trail version of Adobe Photoshop CS6 (downloaded from adobe.com). That trail has expired so i have just purhased Photosop CS 6 (from adobe.com). Before installing the version i purhased, i uninstalled the trail version.
I dont understand this. It the same computer and the font is a system font that comes with the OS (Windows). I cannot create any new text layers.
If a create a new PSD file i get the same message ""Selected font failed during last operation. If problem persists, please disable the font" when ever i try create a text layer.I have installed all updates.
Whenever I start up 2012, I get this error: Type error: Interface method call requires MAXClass, got: undefined..What does this mean and how can I fix it? Once I hit "OK", max seems to run fine.
View 3 Replies View RelatedI realise this is an old thread, just wondering if any new tweaks have some to the surface to all the wheel-double-click action to be altered. Currently my mouse is set to ZOOM>EXTENTS like I imagine most people's is. Lately I've been getting a lot of "Requires a regen, cannot be transparent" errors while trying to zoom>extents, and I would like to introduce a REGEN call into the wheel-double-click macro. REGENAUTO is set to ON.
View 9 Replies View RelatedI opened my awesome camera projection mapping scene and all of a sudden the file doesnt work.I get a popup saying "Errors have occured while reading the scene that might result in data loss. Please check the Script Editor for details."
The Script Editor says:
file -f -new;
// Error: This command requires at least 1 argument(s) to be specified or selected; found 0. //
// untitled //
commandPort -securityWarning -name commandportDefault;
// mental ray for Maya 2011
[code].....
Anyway, I googled it and "delete the mayafolder and restart Maya, thus creating a new mayafolder automatically" came up and so I did, it didnt work. The next solution apparently was to export eveything into a new scene, but only a third of my stuff is IN the scene so that doesnt work at all (yes i tried anyway).The last thing I did in the scene before I closed it down for the weekend, was to import about 10 nCloth flags into the scene. Disabling them all ofcourse, but still, that might be the reason it's crashing, I dont know.
I've been using AE CS6 on Mac OS 10.7.4 upon release and updated to 11.0.1 when it was released as well, so for a while, but just today I started to get this warning-
"Ray-tracing on the GPU requires CUDA version 4.0 or later. Ray-tracing will use the CPU until you install the latest supported CUDA driver."
I am running a supported Quadro 4000 with the latest CUDA driver, 4.2.7, and about the only thing I know of that I have installed recently was the update for SpeedGrade today. Why I'm now getting the warning?
I'm trying to make a layout for a site that requires the height in the file name.So I was wondering if paint.net had a function similar to this picture (photoshop) or is there any other way to measure height?
[URL]......
I don't know if I did something wrong, I click Artistic Media brush and click on the page and I get the message again and again.
The Eraser tool requires that you select an object.
CorelDraw X5 v. 15.2.0.686 Hot Fix 4 - Windows 7-64