Whenever I use a tool (select, crop, highlight, resizing an image) in CS6, the image flickers. Not my entire screen, but just the background of CS6 and the image. It flickers like a strobe light and makes it very distracting to try and crop, select, do anything in CS6. It's clearly a CS6 problem and I have tried uninstalling and reinstalling it several times but it continues to flicker.
View 4 RepliesI'm working on a drawing for a part and am getting annoying flickers from light to dark. What I am seeing happening is that everytime I pan or zoom (in or out) the drawing, the drawing lights up, and remains lit up until I move my mouse cursor over a view. When I do so, the entire drawing turns dark and remains dark until I pan/zoom the drawing again. So I am getting a constant dark - light flicker that I find very distracting.
I am only seeing this in this one drawing, however I do remember having this problem previously. In other drawings I have done, they will either be light (which I correspond to being normal) or the entire drawing will be dark. This I read has to do with the lighting in the source part file, but it never really bothered me.
Im on 2012 Iventor Pro, and Windows 7 Pro. 64bit with SP1.
When I use the quick selection tool my monitor starts flickering what do I need to change in my set up.
View 5 Replies View RelatedImage canvas flickers on windows 8 cannot do any editing already tried the following method what else I can do Have intel i3 processor with latest raphics drivers installed.
View 2 Replies View RelatedI had to re-install Photoshop CS-5. Now when I try to crop an image, the image flickers between black & the image. Often remains blacked out till I click on the image. Never did this before. Is there a setting that needs to be changed?
View 10 Replies View Relatedthe photoshop image im working on flickers on and off when using tools
View 1 Replies View RelatedCant change font style, saving image box flickers in and out and the screen jumps???
View 5 Replies View RelatedStrobe/Flicker effect alternating between 2 clips in VideoStudio?
Say I have 2 clips, one of movie A, one of Movie B. I want one to play for half a second, then the other to play for half a second. Repeat for about 30 seconds. I could take each clip, split it up into half second increments, then insert each one alternating. But that is about 60 splits and a lot of redundant mouse work!! See the problem??
Is there a way, either through effects or other dev tools, to speed this process up?
Here is example of the effect i'm trying to achieve:
[URL].........
My "infinite light" tool does not display when I select "infinite light" in my 3D layers panel. It's the tool that rotates so you can easily adjust the light in the image. I'm guessing I've done something with my settings.
View 2 Replies View RelatedCS5, Photoshop. I want to replace a short portion of the top of a black turtleneck sweater with the adjacent skin color. In other words, lower the height of the turtleneck on the neck. Skin color is very light white. I have tried th patch tool, but it does not change the balck to the white skin color. It just lightens the black slightly. how to replace the black with the light white?
View 4 Replies View RelatedI am trying to get the light blue bow to look as the other bows (dark blue) When I use the color replacement tool and sample the color from the dark blue bow and try to paint the light blue bow it just wont work..it color it with light gray instead of dark blue that I sampled.
View 9 Replies View Relatedi wondering how to add light to an image something like this glossy light stuff on the girl
View 3 Replies View RelatedI just upgraded my Win7 64 desktop to Win8 pro 64, and now photoshop cs5 is behaving very strangely. Any mouse click operation causes the entire working window to flicker, and the background to cycle between the normal pale gray background, a window full of transparent pixel rectangles, and solid black.
There doesn't appear to be any update from Adobe available within the help menu, so I think I'm up to date on the software.
Is this a known incompatibility between CS5 and Win8 64? I spent hours searching online before I did the Win8 upgrade looking for compatibility information on photoshop cs5 (and the rest of the cs5 master suite) but found very little information.
Has the method for positioning image based lights changed in the most recent version of Photoshop? The positioning sphere seems to have gone missing.
View 3 Replies View RelatedI bought Adobe creative suit 6 design standard yesterday. when using photoshop, the background canvas flickers and becomes transparent when i do things (zoom, erase, brush)
I have followed the solution of changing the drawing mode to Basic, but it is still an issue and is making photoshop unusable.
Using Trial CS6 on Windows8 - the workfield flickers in black. I am not going to continue the trial like this! Frustration with this app that it is so difficult to use. I loved MS Image Composer 1.5!
View 5 Replies View Relatedhow I would achieve this exact effect in Photoshop? The 2 light blue type of effects, one at the top of the image, the one at the bottom of the image. It isn't just regular lighting, as it uses a totally different light blue color. I don't know how to achieve this effect
View 9 Replies View RelatedI noticed that the display flickers when going back in history using a script (I'm using Javascript), like so :
var docRef = app.activeDocument;
docRef.activeHistoryState = docRef.historyStates[docRef.historyStates.length-2];
What precisely happens is the document briefly turns to a checker (the same checker that indicates transparency).
It also happens when using "executeAction" with the action recorded by the ScriptListener.But, it only happens when the function is called from within a script, not when I'm using the history panel.
This is a problem because it makes it a lot harder to see what changed between the two history states.i'm using CS6.
I have a problem with photo Shop CC: When I try to write a text on top of a photo the screen goes black and flickers?
I uninstalled the progran earlier on today and downloaded it again but the problem is still there.
I'm trying to create a "blue glow/light rays" around an image of the planet Earth and I can't just seem to make it look realistic like this image here:
How to do this technique? You can find a planet earth image by searching for NASA BLUE MARBLE and it's free.
Happening after purchasing a new computer. Have SSD, 8gb ram, seems to happen more often on large files but will also happen at times opening images.
Problem signature:
Problem Event Name: APPCRASH
Application Name: Photoshop.exe
Application Version: 12.1.0.0
[code]...
I am trying to animate a casino-like light board made of tens of light bulbs/leds. I thought the easiest way to do it would be creating a matrix of bulbs arranged by material ID and then design a pattern in multi sub-object materiel so I could somehow scrub through it and achieve animation effect. The material modifier allows to change ID for the whole object only and MaterialByElement shuffle ID`s in a random manner.
[URL]
I am attempting to build a facsimilie enigma machine, I would like to know how best to create an effect so that when a key is pressed a corresponding letter appears to light up. Btw I am not looking for an animated image, I can take care of the transitions between on and off, I just need to create the two image states.
Attached Thumbnails
How do you lock the pivot point of a light to the light itself? I thought just adding a Axis node would move the light and pivot point but the pivot does not move. Is there a way of parenting them together?
View 2 Replies View RelatedI have a problem with the cursor in 3DS max 2014. I am using windows 8 and when i hover over the empty spaces in the menus on the right, the cursor flickers between the arrow an the hand.
View 1 Replies View RelatedAm a very recent purchaser of Pro X6, and was wondering the best way to separate or 'lift' the darker areas of an image from lighter areas. I have attached an image as an example. Ideally, I'd like to separate entirely everything in the image that is yellow, from everything that is not.
View 14 Replies View RelatedI have a light-colored image that I want to make a transparent background of without having any of the jagged white edges and whatnot, to make a signature and avatar and so on. I've tried the magic wand, Alpha Mask, and Alpha Space, none of which have succeeded. As I said, the image itself is very light (the attached image), so it's difficult to achieve what I'm trying to do.
Attached Thumbnails
Have a light cyan (13% dot max gradient piping the text) emboss letters spot channel .psd placed in AI. In Photoshop the image shows up great, but in Illustrator is notvisible (goes to white).
Color profile is good & generated with hardware device i1Profiler Same color settings in both AI & PS- North Amercian General Purpose in bothAssign profile tried both Working CMYK US WEB v2 & don't color manage
Illustrator (left) Photoshop (right)
this is distracting - In LR4 there was no border.
View 2 Replies View RelatedHow do I use the standard Revit can lights in a wood joist floor with drywall applied to the bottom? If I place in a suspended ceiling, can lights light up just fine. However, if I use them in the floor space of a wood joist floor, the light itself gets covered with the floor. How can I get the light to cut the floor out so I can see the light when it is rendered?
View 4 Replies View RelatedThe screen flickers when I move the mouse around an open drawing. I just applied the latest patch to Civil 3D 2010. It was not doing this before the patch.
Have Quadro 3500 video card. Updated the driver for that with no change.
Have a Logitech wireless mouse, M310. Up dated the driver for that with effect.
Changed to a wired mouse, no change.
Is there a setting in Autocad where I can set the refresh rate so that it does not refresh while moving the mouse. Or at least slow the automatic refresh rate down?