I have some large text and i want to replace the centre of the text with an image spanning all the letters - so that the picture is "inside" and just the text outlines are left.
View 12 RepliesI tried Nexus font (finally) and don't see why people have mentioned it. I don't like it and uninstalled it quickly.Which font manager do you think is better than Font Nav?
View 13 Replies View RelatedI am doing a menu for a client and it seems that every time I put a specific font size such as 10pt. in a text frame..it changes to a size 11.3245pt. every time I open the file back up to work on it again.
How do I prevent this? Or is there something I am doing wrong in the text frame?
We are trying to convert some text to a Hindi font a translator sent us. It is installed correctly on PC and shows up in Corel X5. When you convert it, it says it is the correct font in object mangar but appears a row of boxes? The font is Kruti Dev 010.
I attached an screen shot of this.
7737.Hindi Font Issue.pdf
when I try to change the font in corel draw x4, the text disappears, this happens with new documents, old documents etc.
It works in Photo Paint, but for some reason draw has stopped working. I restarted and tried everything I could think of!!! This seemed to happen after the latest windows 7 update.
Also on a sidenote is it possible to get rid of the ads when i start up Draw and PP x4? It keeps hassling me to upgrade. It is really really annoying... seriously I bought this product, why does it have pop up ads???
How would I go about changing the font of a text through all pages? I've used Find/Replace tool but it stops on one page.
View 9 Replies View RelatedEnter 2-3 lines of text either artistic text or paragraph text. Select and change the font for the first line only. Lets say you typed in the sample text using the Arial font and then changed the font for just the first line to Arial Black.
Now, how do you change the font for all the text to Arial Black?Now, try to change the font for all the text in the text object to Arial Black.
It is possible for me to change the font for the entire text to any other font, except the font that is used for the first line.
Even if just a single word is typed, and you change the font for just the first character in the word, you then cannot change the word's font, to the font which you used for just the first character.
For some reason my text option list will only show one font option at a time (in CorelDRAW 11), but when I use X4 it shows the 5 last ones. Where in the 'Options' section can I correct that to show the longer listing?
View 3 Replies View Relatedthrough some difficulty I'm having in getting the leading (ie, line spacing) I want with artistic text, in CorelDraw 12? I have three lines of text, the first line of which has a font size of 20 pt, and the second and third lines having a font size of 13 pt. The default leading is greater between the first and second lines than between the second and third -- probably due to the font size difference. I would like to make the leading equal for all lines, regardless of font size, but can't figure out how to do that. "Format Text - Spacing - Lines" seems to offer leading only in relation to character height -- which automatically makes the leading between the first and second line larger (due to the larger font size used in the first line) than it is between the subsequent lines.
View 5 Replies View RelatedI'm perfectly happy with the TrueType font (BankGothic Md BT), but all the style settings change to the T1 equivalent every time I close, and when I open the file again the T1 text does not show up. I can go through and reset all the styles, then re-apply them, but it wastes a lot of time.
View 1 Replies View RelatedI want to use the font box, but all the font headings are dead - light gray. How can I turn them on and make them black / active?
View 5 Replies View RelatedI was working on a project and I had recently installed a new font. Now all of a sudden whenever I make a new text box and type some text in nothing shows up. I can only see a tiny black line which isn't even text, even tho its set to 36ft. I changed the font and size to see if it made a difference, and nothing worked. I restarted PS and my computer several times, and still the same thing...
View 4 Replies View RelatedGimp 2.6.8 on Linux openSUSE 11.3
I need to extract text and font from a text layer. No problem, I thought, with gimp-text-layer-get-text and gimp-text-layer-get-font.
But I find that the original text layer was cropped withplug-in-autocrop-layer. Nevertheless Gimp lets me edit the text with the text edit tool - after a confirmation dialog.
But I can't get the text with script-fu. Is there a way to manage it? There are many files involved.
It was a picture and text was on top...and the picture was now on top of the text.
Holding the Option Key...Click?
to create the kind of text.
im basicly trying to recreate the halloween bash style for some work of my own, but i cant cant find a way.
ive tried different fonts, text effects, word wrapping etc but i just cant seem to do it. unless this is made using another program.
It's concerning the font SF Movie Poster
Two machines, both with XP, Corel Draw X3 13.0.0.576 and SF Movie Poster installed - BUT two different outputs.
Both Corels open the file and the characters with SF Movie Poster (I checked it by clicking in the words)
e.g. figure 1:
The first machine shows the number one as The other machine shows it like 1
I am new to Corel Draw. How do I arc font? I have a customer that wants some writting arced above her logo and below her logo. The only way I know how is to creat a circle and "Fit Text To Path". But then I can't seem to delete the circle without erasing the writting as well.
View 7 Replies View RelatedUsing Illustrator I've developed an alphabet of letters that I'd like to turn into a font (otf file). I'm wondering is it possible to accomplish this with Illustrator or any of the other software in the Adobe Creative Suite? take these Illustrator SVG files, and make them into an Otf?
View 4 Replies View RelatedVery difficult to change a font in Photoshop CS6: I select the font then go to the dropdown (either the side panel or the options panel at top; same results) and BEGIN TO scroll down to find the font I want to change to. After a couple seconds, the list pops back up to the top. Usually I cannot scroll past the fonts beginning with M or N before it overrides my scrolling and pops back to the top again, If I can select quickly, I can sometimes nab a different font that starts with a B or C, but hardly ever one I am seeking.
View 3 Replies View RelatedHow do I figure out what font is used on text layer on a .psd? I thought highlighting the text or selecting the layer would show me the font used, but it doesn't seem to work that way. Is there an info option or something that can give me this info?
View 3 Replies View Relatedwhen I try to add or edit text (in this case, as the screenshot shows, Franklin Gothic Heavy)-- It always adds a 'slight' italicized format to the text.
As you can see, the 'font style' drop down menu is greyed out.
If I create some text and change it from the default size (24 pt) to 14 pt and then rotate it, the size changes to the default point size (24 pt, I have even seen it do ~17.54)
Appears to have manifested with v16.4
It also squishes the text...
I have more than 1000 installed on an xp system. I know I don't need this many. I'm sure I could get by with 400 or less. How do you thin down your fonts? How many do you try to keep on your system?
What are you using for font management? Bit stream? Something else?
Current System: i3 3.07ghz, 3gb ram, Windows 7 32 bit with all updates and X6
I am trying to set the cut lines around a font that is an outline font and I can't get it to work - the outline just turns into the cut line and doesn't cut the font that I need.
View 14 Replies View RelatedI have had this problem since I loaded CorelDRAW X6 (64-bit) in June, 2012 but was busy learning all that was new since the ancient version running on my equally ancient Windows98 machine. Up until this point, I have tried all of the directions in the manual, this forum and on the website which includes, "Save Settings As Default". (These instructions do not differ from those I use in the old CD package only where I make them.)
These are the steps taken:
Open CorelDRAW X6 starting a new file.
Go to "Text Properties" Docker & choose the font, size, etc.
Under Tools, select "Save Settings As Default", close CDX6.
Technically, these steps should have saved the new font with associated choices for all future files until I change them again, but it does not. When I open a new or existing file, my new font changes do appear on the Text docker so I choose the outlined A on the toolbox bar, my choices are still showing on the Text docker and now, also on the Property bar. As soon as I click on the workspace where the flashing cursor awaits input, the text properties change to Arial, 24 pt, which has appeared since I first loaded the package. Should I redownload and reinstall the software? If so, where are the preference files so I can save them?
Scanned from a cap:
Let not the one who says it can't be done interrupt the one who is doing it.
My font navigator used to install the font automatically if I have it on the system but it wasn't installed. It has quit doing that. It tells me I'm missing the font then I have to manually go to the navigator and install it then open the file again. I've had this happen on multiple systems and versions of corel. I'm currently running X5 on Vista-64.
Just to clarify. When I open a file that I don't have the font installed for it will bring up a dialog box that says missing fonts. See screen shot below. The part that says install from Font Navigator is Grey and I can't select it no matter what. I have to take note of what fonts are missing then open font navigator, load them in and then re open the file. It worked fine a couple of weeks ago and then just quit.
I want to use Arabic font in corel draw x12.
View 1 Replies View RelatedI am currently using PhotoShop CS3 and having some trouble with a font. I had made a text/pic about 2 years ago and i wanted to go back and rename the actual text or make a new one with the same font.
However i can not find the same font i had used. Is there anyway to get the same font again maybe a trick or something? Heres a picture of what it looked like...
i have installed font in D directory as i didn't have enough space in my default one.. now my fonts in photoshop are not working they are just showing a black line.. what to do..?Whenever i type with my text tool it only shows a black line..
View 8 Replies View RelatedSometimes I open a file with layers in PS and click on a text layer, to move or change it, and immediately the text and font changes into another text/font from the document. Can not save the file then the problem stays forever. I can´t touch/change any text layer without this problem. Happens on every ca. 10th - 20th file I open... how can this be fixed?
View 2 Replies View Related