Photoshop :: How Do I Create Full Width Photos For A...
Feb 29, 2008
I'm trying to create a full width photo layout using Photoshop or Fireworks CS3 and then end with Dreamwaver CS3 without the photo's being tall.
to create a flash site just like expo but at this point I would settle for a static photo with the same size being the same on each page.
Also I would like my site to be a liquid layout so the photo and everything else (text, Links etc) on the page flows correctly.
The size of the photo's they offer are
425 x 282 px (5.9" x 3.9")
849 x 565 px (11.8" x 7.8")
1698 x 1131 px (5.7" x 3.8")
I'm selecting horizontal photo's. I do not know how to match the same width, height and appearence as the websites I mentioned above.
If I choose a photo that fits the width then the length is too long. Also if I choose a large photo and have to crop it then most of the detail of the photo is lost.
I'm attempting to create a mock-up for my web in Fireworks CS3 and after search Adobe and www I came across the mock up should be 1004px which would end up being 1024 with vertical scroll bar and small margins.
I also have Photoshop & Flash CS3 but should mention (if you haven't already guess it by now) I am a rookie when it comes to creating a website.
Adobe Photoshop Elements 12: I need to create a Web Photo Gallery so I can upload thumbnails and full-size pictures to my own website. No Facebook, Flickr, Adobe Revel etc.
I'm using Lightroom 5.2 on a 27-inch iMac running Mavericks. I want to create a slide show full of photos with a native aspect ratio of 3:2 (from a Nikon D4 and a Nikon D800). I do NOT want the photos to be trimmed along the top and bottom, which is what happens when I choose "Zoom to fill frame" in the Slide Show module. I do NOT want letterboxing along the right and left edges of the photo, which is what I get if I don't choose "Zoom to fill frame" and just export the slide show using the "Export Video" button in the lower left of the Slide Show module. ("Export Video" gives me four choices for "Video Preset," but none of the four is a 3:2 aspect ratio.) I just want a slide show of uncropped 3:2 aspect ratio photos with no border around them whatsoever. Considering how many of the photos taken every day on this planet are still in the 3:2 aspect ratio, I find it hard to believe there isn't a way to do this.
If for some reason there is no way to create such a slide show in Lightroom, I have Creative Suite 5, iPhoto, and iMovie, but I don't want to buy any new software just for this.
I'm having problems printing (to an Epson 3800) on 17x25 paper (the image is 16x24 @ 240dpi). The image is not printing the full width of that it should. The odd thing is that it fills a different width every time I try to print it. I have tried multiple images and the same thing happens, so I do NOT think it is something specific to the image.
I suspect it is a problem with my printer. But after spending almost 45 minutes on the phone with Epson, they claim is must be a problem with PS (I'm using CS5 [12.0.4] on Windows Vista 64-bit, SP 2 machine). Epson support had me save the image as a JPG and print it from Windows native print util (and not PS), borderless on 17x25 paper and the printer was able to print the full width of the paper..I think it could still be a problem with their printer driver (and not a problem with the print head physically not being able to move that wide).
I've printed hundreds of prints this size with this version of CS5 on this exact same machine and printer and never had a problem bef.The "native" dimensions of the image are 2336 x 3504. I have resized it to 3864 x 5796 (which is 16.1 x 24.15 inches @ 240dpi). The first time I printed it (where this problem occurred), it printed about 12 inches wide; the 2nd time about 11 inches, the 3rd time about 13 inches. Note: the image is NOT being scaled, it is printing at full size but it just being cut off.
The weird thing is that if I size it to any of the other 4 sizes I regularly print at everything is fine (5 x 7.5 on 5.67 x 8.33 paper; 8 x 12 on 8.5 x 12.5 paper, 10 x 15 on 11 x 17 paper and 12 x 18 on 13 x 19 paper).
But the experiment the Epson tech had me do shows that the print head is not "blocked". Thus, I can only think that there is either: a) CS5 is someone putting an incorrect "bounding box" in bit stream it is sending to the printer or b) there is a problem with the Epson print driver in that it is interpreting the "bounding box" of the image incorrectly (but only when sized at 3864 x 5796)..I tried Adobe's Chat support and got nowhere and the hold time for phone support is over 2 hours..
I'm working for a client watermark his images. He has designed a watermark in PS CS6 that extends across the bottom of the image, the full width of the image. Like this:
Obviously, the images to be watermarked are all different widths and the watermark gets scaled up or down accordingly which is not the desired effect. On tall/thin images, the watermark is barely visible. Vice versa on wide or square images. I have tried many different widths of the watermark based on the widest and thinnest images. It works, but still not the desired effect for my client.
I've installed the Adobe Watermark Panel, but it seems that it wants to resize images with a width/height box on the right of the image quality and ppi boxes. (I might be reading that wrong though)
I've also tried several freeware programs. All work fine, but my client doesn't seem to think so.
So the question is, can I apply a watermark that doesn't get scaled? I know image height is a factor. I could write my own application to do it, but this seems like a re-inventing the wheel issue. I think the watermark should be scaled in height to a percentage of the image being watermarked and any excess width should be cut or truncated.
Why is my command-bar limited to just 80 characters, when by the looks of it, it could easily fit 200 characters in before having to use a second line of text?
I often want to copy the filepath of the current .dwg and paste it into explorer, but it only pastes the first line of text!
See attached .jpg or text below
Your current drawing filepath is M:196493-CADOPV 3-Entwurf 5 PVModelLAG_AUS_1989_0000_LAGEP_BAUP_XXXXXXXX_MS001_20130321-Synthesis-Plan-Of- pipelines_AB.dwg. command:)
I am using Photoshop Elements 6.0. I've shot an image which is horizontal, and am an trying to get the image to be full frame (square). I need to have the entire image shown so I know this needs to have a border on the top and bottom of the image. My image background is black so the border needs to be black to blend in; similar to a letter box format on a Cinemascope ratio move. how I can get this border so that I can make a rectangular image look square?
Photoshop Elements 12 will not display photos in Organizer in full screen mode. I've uninstalled and reinstalled the application but it still doesn't work.
I have upgraded from pse9 to 11 and after selecting a photo in organiser then viewing in full screen and enlarging to 100% then exiting, organiser loses the highlight and reverts to the first photo. This also occurs when the photo is edited and saved you have to find where the editedd photo has gone to, it is time consuming when you have a large number of photos in the organiser. pse9 did not do this.Also pse11 does not sort photos properly by the shot date especially when the photos ard edited
I have PSE 10 and I recently decided to start some shooting in RAW. However, when I open my photos( I have a Canon Rebel T2i so the file extension is .CR2), it says, "processing Camera RAW file" and then opens the photo in the full edit mode instead of the Camera RAW dialog box. I checked my plug-in, and I have version 6.7 of the Camera RAW plug in. I'd really like to start working with Camera RAW! Oh, and I am working abroad for a couple months and do not have my installation disks with me, so uninstalling and re-installing PSE is not an option.
LR5 bug. I've found that when I sync a batch of photos more than once, unless I untick the sync crops option, 1px is cropped off the width of all synced photos. The master photo stays at its original size.
My images cannot be anything other than the exact original size. This is a tech issue not a personal one.
Clearly there's a workaround for this, but then you have to remember to untick the crop option. If you don't and you've moved ou of the module and started working elsewhere, it seems that there's no quick undo fix; you just have to go back into each photo and set to the last 'good' history step.
to Photoshop elements and will be needing to make: collages consisting of multiple photos from my personal files usually between five and 10 total photos. Yesterday while browsing Photoshop elements frequently asked questions I came across an answer explaining how to do this using full edit.
While importing photos, I would like to add keywords selected from my full list of keywords. not add new keywords where I can use an existing one. I think I used to be able to see it but can't remember how I accessed it.
I would be possible to create a plugin that could create a line with different width. Photoshops pen tool where you can fill stroke, and simulate pressure.
It would not have to be an advanced plugin, it would only require 2 features:
1. Max width (the maximum width in the middle of the line) 2. And of course would let you decide where the line should be.
We are creating a parametric family for our window product. We have managed to create maximum constraints for both height and width. However combined with the maximum height and width we have a maximum area alllowance. We are struggling to find a way to build this into our parametric family. How this might be achieved? Is it possible to display warning text boxes within Revit?
I do cartoons and I want to be able to use the pen tool, brush tool and/or even blob brush tool to draw. I'm trying to draw a straight line that has a varied stroke width, so it looks like it's drawn with a felt tip marker or maybe a pencil. The natural random/varied stroke width is what I'm looking for.
I see the "vaiable width profile" drop down box in the tool bar but I only see one option that looks like this (it says "width profile 2" when I mouse over it). Although this varies in width, it's too consistent and doesn't look natural at all. Is there a way to get a varied stroke width for straight lines? I have a pen talet and have tried pen pressure as well but I've not found an easy way to do this.
I'm having an issue where I'm creating a white border around two landscape oriented images that are the same exact size then doubling the width of the canvas. I've never had this issue before with PS CS6.. I tried resetting the photography workspace but no luck. I tried with two portrait oriented images and the same result. I've restarted my machine. I'm on Windows 7 Pro 64bit and I'm running PS CS6 64bit as well. Thought to do a repair through Programs and Features but there is only the option to uninstall. I haven't done anything out of the ordinary except use an action a few days ago I downloaded and used from
[URL]........
and I downloaded and used the press print action.
How I can correct this? If an image is 20 inches wide and I'm doubling it to 40 it's tripling the width to 60 inches. Is there a way I can reset every aspect of PS CS6 to get back to a factory state other than uninstalling and reinstalling?
I can't figure out how to adjust the size of the program screen when in Full Edit Mode. I can see portions of the Quick Fix menu and none of the Guided Fix menu. There seems to be no way to resize the window.
Am I the only one who has edited a stroke with the stroke width tool, then outlined the stroke only to find a countless number of points and noticeably unsmooth edges? Is there a setting or certain way to ensure that the stroke width tool won't corrupt the smoothness of my shapes? The stroke width tool is the most handy new feature I can imagine, but this problem makes it almost entirely useless, unless designing something where precision and smoothness are not important.
I am trying to create a custom message box with variable width and height by passing width height title and list of text. I can get the routine to work if I use preset width and height, but would like to make the box adjustable.
I'm having trouble with the spacing of my text when I import a .rtf file. The spaces change width based on the width of the columns. The problem does not effect all the paragraphs only select ones. If I change the width of the column the spacing of the text will fix itself. All of the text is the same text style. I have attached a copy for reference.
Trying to use the width tool, I ran into the following problem. I would like to have a smooth transition of the stroke width between two width points while keeping the original stroke width unchanged outside of that line segment.
There are four width points here: two end points and two in between. The original stroke width is 200. The two on the left have one side set to 100 while the two on the right have one side set to 50. I would like to eliminate the distortion of the line width occuring in the first and third line segments. The only solution that I have come up with so far is to place two additional width points very close to the two middle width points: one with a 100-unit side to the left of the second point in the picture and one with a 50-unit side to the right of the third point in the picture. Yet there will be a small distirtion in between.
