Photoshop :: Grab Images From Template
May 17, 2007
When you purchase a template for a website, it often comes with the original photoshop document.
Is there a command in photoshop that takes what they've done and saves it all as the individual images that are usually included?
I have a template and I swapped out one image in the file, but I can't get it perfect by simply replacing the final image. I have the photoshop file with all the slices and whatever people do with templates, but I can't seem how to get it to save all the separate images again so I can grab the one that I need.
View 3 Replies
ADVERTISEMENT
Nov 27, 2006
I want to replace an image in the template .psd with one of my own.
After I selected the layer(blue highlighted), I try to Ctrl-click on its name in the Layers palette.
In previous versions, this will immediately give a selection box(marching ants) around the
corresponding image on the screen. That action seem not to work in CS2. Does anyone know that action
works in CS2?
View 5 Replies
View Related
Nov 19, 2012
Using Photoshop CS6, I am trying to insert two same size images into a predesigned template. I can insert the first image just fine. However,when I try to add the second image below the first one, the template rejects the second image and just leaves a blank space.
View 2 Replies
View Related
Jun 17, 2013
I have more than 2,000 QR codes that I need to insert into this template for printing. I am hoping that there is an automated way to do this so I don't need to resize and place each QR code image by hand.
Is there a batch command or action of some kind that can perform this task for me?
View 5 Replies
View Related
Jan 17, 2014
How can I import images onto an existing template?
View 2 Replies
View Related
Jan 2, 2014
I wanted to set up a template for dealing with printing four images on a sheet.
I created an image the size of the sheet and then added four layers, each of the desired image size which needed to be positioned appropriately.
When I went to position the images, I could not find any reasonable way with the move command or with any of the layer operations to position each layer precisely.By that I mean simply type in the coordinates of the upper left corner, or move with the mouse where I see a text version of the upper left coordinate of the new layer position as I move.
If trying to position using the mouse, the lower left of the status line shows the position of the pointer itself, so that is useless in positioning the layer as a whole; and the numbers to the right of the per-cent size display show how much the layer has moved relative to its starting position, not the absolute position of the upper left corner. (I'll grant that the latter is useful, but in this case one needs something else, particularly if a layer has been moved and needs to be repositioned to a fixed location.)
The only way I could get what I wanted was to expand to 800%, and at that magnification I could grab the upper left corner with the mouse so the mouse position was itself the upper left corner position. Surely there's a better way?
Layer/Layer to Boundary Size... does not appear to work as advertised. The offset appears to be relative to the original size of the layer, not the original size of the image. The panner image is limited to the size of the layer, not the image. When you first bring up the dialog, you are unable to reposition the layer unless you change the layer size to make the layer smaller. If you make the layer half the size of its original size and then click "Center", the offset is set to - 1/2 the size of the original image, not + 1/2, which seems bizarre. The layer is scaled properly, and ends up where you would expect (based on the center command given, but not based on the offsets indicated), but the values in the Offset boxes seem to have the wrong sign. It works by moving the original layer relative to the desired new layer, rather than position the new layer size relative to the image. Which means you can't move the layer relative to the image if the layer is smaller than the image, and the graphic panner doesn't show you the layer position relative to the image as a whole. It is not at all intuitive and is not useful for quite a few common cases.
Layer/Transform/Offset shifts the contents, but not the layer itself. Which is what it is supposed to do, so that's ok; it's just not usable for this operation.
View 10 Replies
View Related
Jul 11, 2013
I have a background with a pattern overlay effect on it. I need to send my web developer a block of this pattern in jpg format so that he can translate it into a repeating pattern in the background of the site.
It seems that there must be an easy way to do this that I'm not getting. All I can think to do is to select a part of it on the screen and copy, but since it's already set up as a seamless pattern, I don't know where its "edges" are.
View 5 Replies
View Related
Sep 3, 2012
for the last few months out of no where photoshop all of a sudden stoped letting me grab the corners of my selections. it realy limits what i can do an d i would really love to kno how to fix it,
View 3 Replies
View Related
May 11, 2013
I'm looking for a plugin that will allow me to capture a single frame into Photoshop from a video feed from a device using WDM or VFW (Video For Windows) drivers. I have a video device that is using WDM or VFW drivers, but no TWAIN or WIA driver is available for my device.
I need to be able to capture a frame into Photoshop from my video-input device which is using a WDM or VFW driver. I'm hoping if one does exist, it is compatible with Photoshop CS1, because I'm using that older version of Photoshop, and don't plan on upgrading yet (it seems to do almost anything I'd ever need a graphics program to do). I'm not even sure such an input plugin exists, but if it does
View 1 Replies
View Related
Jul 7, 2012
I'm trying to grab a logo off a white blackground. How would I go about doing this?
View 3 Replies
View Related
Sep 19, 2006
there is a brush or something similar that allows you to grab a part of a picture and kinda drag it around. not cut and move it, actually distort it and such.
there is also maybe the same one that allows you just to click and sort of inflate/deflate part of the pic.
i KNOW one of you out there has to know what im talking about!!! it kinda stretches the part of the image so that you can make things look distorted or whatever. almost like if you grabbed your cheeks and pulled!
View 5 Replies
View Related
Nov 6, 2012
CS 5.5. Just restarted Photoshop and still the same problem. I should be able to hold down the space bar and grab the screen to drag it around. Not working anymore.
OS X
CS 5.5
View 4 Replies
View Related
Aug 10, 2012
I've been able to in the past use the eyedropper tool to grab colors from browser windows and get the exact coded color if it's a css color. I'm using Photoshop cs5 on a mac with snow leopard. When I try to get any color from a browser window (both safari and firefox) photoshop will shift the color slightly.
View 5 Replies
View Related
Oct 25, 2013
I can't grab more than one object at once. I'm also not seeing the bounding boxes around the objects. I must've pressed something that disabled me from being able to grab multiple objects.
View 4 Replies
View Related
Jun 2, 2011
When I have text and after a draw a recangle over it without any fill and if i try to grab the text I cant just grab the rectangle.
View 6 Replies
View Related
Jul 20, 2012
Working on a book cover but it seems that once something is down and saved - like my title - I can't just go back and tweak it with resizing and moving. How to simply rearrange the layout?
View 4 Replies
View Related
Jun 16, 2011
how can you adjust the "Grab Viewport" -Animation Quality for Nitrous?
Rendering any one of the styles in Animation produces horrific quality, because the viewport renderer does not spend the few extra seconds necessary to generate nice antialiased image-quality.
there is no way to adjust the rendertime. Because this would make this valuable improvement 50% useless again, if you can not use it decently for this purpose.
View 3 Replies
View Related
May 21, 2013
I downloaded a grab bar family that I thought looked very good. But then I tried to place it on the toilet stall portion (I also downloaded stall partition families). When I tried to place the grab bar, it wouldn't place -- I believe because the grab bar is WALL BASED.
So now the question is how do I go about placing a grab bar (or anything else) that is not wall based so that I can use it with the stall portion? I had tried to use face based but couldn't get that too work.
View 5 Replies
View Related
Jul 2, 2012
I have a problem where I am unsure if my upgraded template is incompatible with Revit 2013 or is there something else at play.
If I create a precast stair in default template I get "end with riser" turned on automaticaly. If I copy that stair to my template and create new stair, "end with riser" is turned off and I manually have to adjust stair afterwards.
Problem is "end with riser" is now an instance parameter of stairs and I can't find where to change the default value.
Why is the stair type that works in default template stuffed when copied to my template?
View 2 Replies
View Related
Jan 23, 2012
Converting a default part template to a custom template?
View 1 Replies
View Related
Aug 19, 2008
I am unable to adjust my Viewport sizes in anyway, (wont allow me to grab handles to adjust size & or move entire view port) after they are changed to the defposits layer, I cant change them back to any other layer because when I try to highlight them, it says "0 objects found". Wont even let me delete them, I don't think they are locked, as I am the creator of this drawing and have done no such thing.
View 6 Replies
View Related
Jun 9, 2011
Can you import layers from a template to a drawing with a different template
View 3 Replies
View Related
Apr 14, 2013
fix to the common errors caused by previous grab brushes surface proximity behavior along center axis. it was a small thing IMO but the solution created evena bigger issue.
now that is works mostly on some sort of volume proximity along x axis it becomes a big problem for moving around two discontinuous surfaces that are close to center axis.
that last version it was good was 2011. 2012 and onwards it seems to be ruined.
View 9 Replies
View Related
Dec 20, 2012
In cfx, i have a source clip which i want to grab just 1 frame of it. So what is the best way to do it in term of efficiency ?
If i'm in timeline editing outside cfx then i can use alt-E and drag the clip to have a 1 frame copy. It's cool but how to do the same thing inside cfx ? i want to do it inside cfx schematic. Actually I can use a timewarp node or mux or maybe there's some other node that can do the same function. But is it gonna affect the speed of the whole tree ?
i'm comparing the two scenarios :
1. i did 1 frame grab in the editing then bring it into cfx
2. i bring the full source clip inside cfx and apply timewarp to get 1 frame to work with.
Is there gonna be different in speed ? if only single clip , i won't see any different. What i want to know : what is happening internally ? does the second scenario will eat up more processing ? If yes, then we need to feature to extract 1 frame inside cfx (just like in editing).
As an addition, in media bin, when i'm in editing module (outside cfx) , i can ctrl-E (cursor change to red icon) to grab 1 frame . But when i go to cfx then it won't work. ctrl-E in media bin won't do anything. It will be great to have that feature in cfx.
View 2 Replies
View Related
Sep 20, 2013
It goes f.e. like this:
I draw a line (no constrains) and I can move it by grabing an end or whole line by click&hold mouse button, great.
But after couple minutes of work with part and sketches I can't grab anything. Even on new created sketches and new lines. Click and drag just open rectangle selection. Oh, between these phases there is a phase when 2nd click&hold works...
When I open/create another part it is normall, but this one I must close and open again.
View 2 Replies
View Related
May 7, 2012
I'm drawing a small map, and in several places there is text rotated so as to fit next to a slanted line. The problem comes when I decide to move the text, usually along a line parallel to itself, or perhaps in some other direction.
As far as I can tell, the only way to select the text is with the lasso tool, which can be very difficult, because of the close tolerances. Maybe the easiest way is simply to erase the text and re-create it. So, is there some way to rotate the selection box, so I can grab the slanted text easily?
View 5 Replies
View Related
Mar 18, 2013
I have a drawing (c3d 2013) provided by a subcontractor that contains high density laser scan data in the form of Acad solids. I have a bunch of conventional QC shots on the same objects, that I would like to compare to the scan data.
I can bring the QC shots into the scan drawing as cogo points, but when I try to measure the distance to the face of the solid, I can't get the perpendicular 3d osnap to grab the solid.
View 8 Replies
View Related
Jul 14, 2011
Add keyboard shortcuts (or at least the option to define them) for all the layer commands. When I say, "all the layer commands", I mean a keyboard shortcut to do anything you can do with the mouse in the Layers window.
Specifically:
Move Layer Up / Down,
Toggle Layer Visibility,
Select Next / Previous Layer (or some set of commands to navigate layers.)
Select Next / Previous Visible Layer could be nice too.
This thread from 2006 asked for similar features, but no thread necromancy.
Implement these shortcuts. Having to grab the mouse to do simple layer operations feels awkward and breaks my flow.
View 3 Replies
View Related
Jul 22, 2013
Using CS6. In the artboard window, I select an artboard tool icon next to an artboard. The artboard displays selected, with the usual grab handles at corners and the middle of sides that in Adobe-world always signal that an object can be resized. I am unable, however, to select the grab handles. When I try to do so, "beep."
An Artboard Options panel has also opened. i can resize the artboard by changing the Width and Height, but I have to guess what I want. If I close this panel, the grab handles go away.
View 1 Replies
View Related
Oct 4, 2012
Our customer supplied us with an Autocad template, complete with attributes, that I would lite to use as an Inventor template.
View 3 Replies
View Related
Mar 6, 2012
Is it possible to assign a "grab" command to the button on the Wacom Intous 4 pen?
At the moment in Painter 12 and Artrage, if I hold down the button closest to the tip on the pen, then press the pen to the pad and drag, it will grab the canvas and allow me to move it around the screen. I cannot figure out how to set this up in Corel Draw X5
btw, its specifically Draw, not Photo Paint that I want to set this up in
View 6 Replies
View Related
