Photoshop :: Is There VFW Or WDM Frame Grab Plugin
May 11, 2013
I'm looking for a plugin that will allow me to capture a single frame into Photoshop from a video feed from a device using WDM or VFW (Video For Windows) drivers. I have a video device that is using WDM or VFW drivers, but no TWAIN or WIA driver is available for my device.
I need to be able to capture a frame into Photoshop from my video-input device which is using a WDM or VFW driver. I'm hoping if one does exist, it is compatible with Photoshop CS1, because I'm using that older version of Photoshop, and don't plan on upgrading yet (it seems to do almost anything I'd ever need a graphics program to do). I'm not even sure such an input plugin exists, but if it does
View 1 Replies
ADVERTISEMENT
Dec 20, 2012
In cfx, i have a source clip which i want to grab just 1 frame of it. So what is the best way to do it in term of efficiency ?
If i'm in timeline editing outside cfx then i can use alt-E and drag the clip to have a 1 frame copy. It's cool but how to do the same thing inside cfx ? i want to do it inside cfx schematic. Actually I can use a timewarp node or mux or maybe there's some other node that can do the same function. But is it gonna affect the speed of the whole tree ?
i'm comparing the two scenarios :
1. i did 1 frame grab in the editing then bring it into cfx
2. i bring the full source clip inside cfx and apply timewarp to get 1 frame to work with.
Is there gonna be different in speed ? if only single clip , i won't see any different. What i want to know : what is happening internally ? does the second scenario will eat up more processing ? If yes, then we need to feature to extract 1 frame inside cfx (just like in editing).
As an addition, in media bin, when i'm in editing module (outside cfx) , i can ctrl-E (cursor change to red icon) to grab 1 frame . But when i go to cfx then it won't work. ctrl-E in media bin won't do anything. It will be great to have that feature in cfx.
View 2 Replies
View Related
Jul 11, 2013
I have a background with a pattern overlay effect on it. I need to send my web developer a block of this pattern in jpg format so that he can translate it into a repeating pattern in the background of the site.
It seems that there must be an easy way to do this that I'm not getting. All I can think to do is to select a part of it on the screen and copy, but since it's already set up as a seamless pattern, I don't know where its "edges" are.
View 5 Replies
View Related
Sep 3, 2012
for the last few months out of no where photoshop all of a sudden stoped letting me grab the corners of my selections. it realy limits what i can do an d i would really love to kno how to fix it,
View 3 Replies
View Related
May 17, 2007
When you purchase a template for a website, it often comes with the original photoshop document.
Is there a command in photoshop that takes what they've done and saves it all as the individual images that are usually included?
I have a template and I swapped out one image in the file, but I can't get it perfect by simply replacing the final image. I have the photoshop file with all the slices and whatever people do with templates, but I can't seem how to get it to save all the separate images again so I can grab the one that I need.
View 3 Replies
View Related
Jul 7, 2012
I'm trying to grab a logo off a white blackground. How would I go about doing this?
View 3 Replies
View Related
Sep 19, 2006
there is a brush or something similar that allows you to grab a part of a picture and kinda drag it around. not cut and move it, actually distort it and such.
there is also maybe the same one that allows you just to click and sort of inflate/deflate part of the pic.
i KNOW one of you out there has to know what im talking about!!! it kinda stretches the part of the image so that you can make things look distorted or whatever. almost like if you grabbed your cheeks and pulled!
View 5 Replies
View Related
Nov 6, 2012
CS 5.5. Just restarted Photoshop and still the same problem. I should be able to hold down the space bar and grab the screen to drag it around. Not working anymore.
OS X
CS 5.5
View 4 Replies
View Related
Aug 10, 2012
I've been able to in the past use the eyedropper tool to grab colors from browser windows and get the exact coded color if it's a css color. I'm using Photoshop cs5 on a mac with snow leopard. When I try to get any color from a browser window (both safari and firefox) photoshop will shift the color slightly.
View 5 Replies
View Related
Oct 25, 2013
I can't grab more than one object at once. I'm also not seeing the bounding boxes around the objects. I must've pressed something that disabled me from being able to grab multiple objects.
View 4 Replies
View Related
Nov 30, 2012
I create animated gifs frequently using the Frame Animation pallet. The default frame rate starts out as 10 seconds, so I always have to change it to 4 seconds. Is there anyway to reset the default frame rate that I start out with to 4 seconds, so that I don't have to change it every time?
Preferences did not yield any promising menus
I know the standard default reset with many Adobe products is to change it without a document open, but in PS CS5.5 if you do not have a document open the frame rate option is greyed out
______________
CS5.5
MacPro Tower
Mac OS 10.8.2
View 3 Replies
View Related
Nov 25, 2012
I am trying to add a frame to some pictures, but when trying to apply a frame from the content section, the frame goes on top of any picture...and not directly on to the picture.
View 2 Replies
View Related
Jun 2, 2011
When I have text and after a draw a recangle over it without any fill and if i try to grab the text I cant just grab the rectangle.
View 6 Replies
View Related
Jul 20, 2012
Working on a book cover but it seems that once something is down and saved - like my title - I can't just go back and tweak it with resizing and moving. How to simply rearrange the layout?
View 4 Replies
View Related
Jun 16, 2011
how can you adjust the "Grab Viewport" -Animation Quality for Nitrous?
Rendering any one of the styles in Animation produces horrific quality, because the viewport renderer does not spend the few extra seconds necessary to generate nice antialiased image-quality.
there is no way to adjust the rendertime. Because this would make this valuable improvement 50% useless again, if you can not use it decently for this purpose.
View 3 Replies
View Related
May 21, 2013
I downloaded a grab bar family that I thought looked very good. But then I tried to place it on the toilet stall portion (I also downloaded stall partition families). When I tried to place the grab bar, it wouldn't place -- I believe because the grab bar is WALL BASED.
So now the question is how do I go about placing a grab bar (or anything else) that is not wall based so that I can use it with the stall portion? I had tried to use face based but couldn't get that too work.
View 5 Replies
View Related
Nov 15, 2013
How do I creat a frame inside a frame? Elements 4.0
View 2 Replies
View Related
Aug 19, 2008
I am unable to adjust my Viewport sizes in anyway, (wont allow me to grab handles to adjust size & or move entire view port) after they are changed to the defposits layer, I cant change them back to any other layer because when I try to highlight them, it says "0 objects found". Wont even let me delete them, I don't think they are locked, as I am the creator of this drawing and have done no such thing.
View 6 Replies
View Related
Apr 14, 2013
fix to the common errors caused by previous grab brushes surface proximity behavior along center axis. it was a small thing IMO but the solution created evena bigger issue.
now that is works mostly on some sort of volume proximity along x axis it becomes a big problem for moving around two discontinuous surfaces that are close to center axis.
that last version it was good was 2011. 2012 and onwards it seems to be ruined.
View 9 Replies
View Related
Sep 20, 2013
It goes f.e. like this:
I draw a line (no constrains) and I can move it by grabing an end or whole line by click&hold mouse button, great.
But after couple minutes of work with part and sketches I can't grab anything. Even on new created sketches and new lines. Click and drag just open rectangle selection. Oh, between these phases there is a phase when 2nd click&hold works...
When I open/create another part it is normall, but this one I must close and open again.
View 2 Replies
View Related
May 7, 2012
I'm drawing a small map, and in several places there is text rotated so as to fit next to a slanted line. The problem comes when I decide to move the text, usually along a line parallel to itself, or perhaps in some other direction.
As far as I can tell, the only way to select the text is with the lasso tool, which can be very difficult, because of the close tolerances. Maybe the easiest way is simply to erase the text and re-create it. So, is there some way to rotate the selection box, so I can grab the slanted text easily?
View 5 Replies
View Related
Mar 18, 2013
I have a drawing (c3d 2013) provided by a subcontractor that contains high density laser scan data in the form of Acad solids. I have a bunch of conventional QC shots on the same objects, that I would like to compare to the scan data.
I can bring the QC shots into the scan drawing as cogo points, but when I try to measure the distance to the face of the solid, I can't get the perpendicular 3d osnap to grab the solid.
View 8 Replies
View Related
Jul 14, 2011
Add keyboard shortcuts (or at least the option to define them) for all the layer commands. When I say, "all the layer commands", I mean a keyboard shortcut to do anything you can do with the mouse in the Layers window.
Specifically:
Move Layer Up / Down,
Toggle Layer Visibility,
Select Next / Previous Layer (or some set of commands to navigate layers.)
Select Next / Previous Visible Layer could be nice too.
This thread from 2006 asked for similar features, but no thread necromancy.
Implement these shortcuts. Having to grab the mouse to do simple layer operations feels awkward and breaks my flow.
View 3 Replies
View Related
Jul 22, 2013
Using CS6. In the artboard window, I select an artboard tool icon next to an artboard. The artboard displays selected, with the usual grab handles at corners and the middle of sides that in Adobe-world always signal that an object can be resized. I am unable, however, to select the grab handles. When I try to do so, "beep."
An Artboard Options panel has also opened. i can resize the artboard by changing the Width and Height, but I have to guess what I want. If I close this panel, the grab handles go away.
View 1 Replies
View Related
Jan 27, 2013
I am editing a short avi clip converted from a 1959 8mm film in the timeline. The telecine conversion results in as sharp an image as I have manged to get using PPro 5.5 unsharp mask. I tried mocha planar tracking to automatically remove a fixed spider web on the top edge of each frame in the clip.
Because the web is not distinct and the background does not progress at a steady fixed pace, the mocha procedure was not successful. Previous feedback recommended methods to mask the edge. Using various masking attempts to automate the procedure was also unsuccessful for the same reasons as mocha.
I have the time and decided to replace the spider web on each frame edge using photoshop tools e.g. clone stamp etc. - although other tools such as healing brush do not appear to work in the timeline as I expect.
My saves so far have resulted in a whole clip being saved with all following frames being modified similar to the first edited frame. Perhaps I am not using the editing procedures in photoshop from the timeline correctly.
How do I save frame by frame in the timeline?
View 4 Replies
View Related
Nov 19, 2013
My band has just recorded our first music video. We are very happy with the result except that the glasses on me (the lead singer) during the close-ups look very funny, they are very skew, and the "frame" does not go behind the ear.
What I would like to do is to import the video and edit these clips frame by frame, where this is showing. There is about 15 seconds totally of me in close-up - 15 x 24= 360 images. The clips are about 1-3 seconds long. And I want to edit all of these short clips of me and then make it a full-length video again.
I made a quick edit on one of the images from the video. The shades still look a little funny but it gets better when the frame goes behind the ear. If it's possible to correct the "glass" part of the shades as well.
View 9 Replies
View Related
Mar 6, 2012
Is it possible to assign a "grab" command to the button on the Wacom Intous 4 pen?
At the moment in Painter 12 and Artrage, if I hold down the button closest to the tip on the pen, then press the pen to the pad and drag, it will grab the canvas and allow me to move it around the screen. I cannot figure out how to set this up in Corel Draw X5
btw, its specifically Draw, not Photo Paint that I want to set this up in
View 6 Replies
View Related
Nov 13, 2013
Not sure as to why this is happening, but like the title says anytime I use move or grab a grip point my osmode automatically changes itself to settings that I do not want. I can change my osnap settings while in the command to set them back to what I had originally had but this is very tedious and I have not experienced this with previous versions of acad.
From all my searching, the only thing I can come up with is; it is a setting within the acad1014doc.lsp but I am not sure.
View 3 Replies
View Related
May 3, 2013
I go to grab an axis and move it, and the cursor is offset. See the movie.cursor_offset.mov
View 1 Replies
View Related
Jan 23, 2012
I was able to find/update a LISP program that returns the dynamic block to its original state, overriding the anonymous name and make the actual block name the effective name. I am in the process of manipulating the LISP program so I can select multiple blocks rather than one at a time.
(defun CYMEFFEC ()(vl-load-com) (setq obj (vlax-ename->vla-object (car (entsel "Select blocks: ")))) (vlax-put obj 'Name (vlax-get obj 'Effectivename)))
View 3 Replies
View Related
Aug 1, 2013
I have this lisp that grabs all the text(the value and the location) in my drawings and I put them into a list. Here is what I have so far:
(defun c:loop ()
(setq numbers (ssget "_X" (list (cons 0 "TEXT") (cons 1 "##*")) ))
(setq newlist '())
(setq IN 0);set index
(setq SLGTH (sslength numbers))
[code].......
What i need to happen is this: When "whatever" returns "value0" i need to set "value0" to the first item in list "newlist". Then when "whatever" returns "value1" i need to set "value1" to the second item. Now I can do it the long hand way, but i am trying to simplify this step, and shorten up my overall program.
View 4 Replies
View Related
