I want to replace an image in the template .psd with one of my own.
After I selected the layer(blue highlighted), I try to Ctrl-click on its name in the Layers palette.
In previous versions, this will immediately give a selection box(marching ants) around the
corresponding image on the screen. That action seem not to work in CS2. Does anyone know that action
works in CS2?
My company has a template setup with an elevation callout for curb and gutter. The callout displays a box around two elevations (TC and G). The TC and G Labels after the elevations only show up in paper space on a 1"=1' scale, which is how the referenced block was set up. I need the labels to show up in 1:20Â and/or 1:40 scale in paper space but only the elevations appear. I edited and saved the referenced block but the changes don't appear to have taken to the template.
View 1 Replies View RelatedWhen editing white reverse text on a template in after effects, I cannot see what I am typing.
How do I preview (change color of background or change color of text)
When you purchase a template for a website, it often comes with the original photoshop document.
Is there a command in photoshop that takes what they've done and saves it all as the individual images that are usually included?
I have a template and I swapped out one image in the file, but I can't get it perfect by simply replacing the final image. I have the photoshop file with all the slices and whatever people do with templates, but I can't seem how to get it to save all the separate images again so I can grab the one that I need.
Using Photoshop CS6, I am trying to insert two same size images into a predesigned template. I can insert the first image just fine. However,when I try to add the second image below the first one, the template rejects the second image and just leaves a blank space.
View 2 Replies View Relatedable to edit an image were as I was able to seperate the background of the image from the text itself ontop.
I was able to see the black and white background that indicated that there is nothing else behind the image and could drop another background under there..
I dropped another image into photoshop, this image is a picture of a phone with white surrounding it, i am using the magic wand to select the surrounding areas to delete it but can't do it ..
I have CS and I am trying to edit my raw files but thats not working. I cant get them to show up in the broswer, nor can I click and drag into CS. I have been looking around the site and I am gathering info and what I have gotten out of my research is that I need the CameraRaw Plugin which is only compatable with CS2, right?
Is the only way I can edit the exact file is through the software that came with my camera (Canon Rebel XT). I was taking the picture and saving it as a .tif but that defeats the purpose of RAW,
I would really like to be able to use the raw file b/c what I have seen done with raw files is amazing. When I edit with the software I have (ZoomBrowser EX/RAW Image task) I feel like I am getting the short end of the stick, everything I do I feel like I could do that with a jpeg...
like to snap raw images. I have ps 7.0 and have never used the open as nor do I know if this application will edit and work with Raw images.
View 5 Replies View RelatedI just upgraded to CS from 7.0 and in CS whenever I am editing an image the image appears sigificantly brighter than in any other program or when viewed on the net. ImageReady shows the images properly but CS has every image brightened while I am working with it.
View 3 Replies View RelatedI just installed Service Pack 2 in my Vista Ultimate 32bit operating system. After the install I opened PS, CS4 and at first every thing looked ok. I then opened an image file, it came up in RAW, I made initial adjustments, and clicked on open image. The image shows in the Navigator window, but there's nothing in the main editing window. It remains blank. If open another window like my browser over PS, and move that window around it leaves a partial image of the browser on top of the image editing window. I had been using Photoshop just prior to installing SP2 and everything was working ok.
View 2 Replies View RelatedI have more than 2,000 QR codes that I need to insert into this template for printing. I am hoping that there is an automated way to do this so I don't need to resize and place each QR code image by hand.
Â
Is there a batch command or action of some kind that can perform this task for me?
How can I import images onto an existing template?
View 2 Replies View RelatedI've just finished scanning thousands of photos, and I've placed them in about a dozen different folders. Now I'm looking to edit them one at a time. So I call up the Organizer and open up the Editor area to work on the first photo.
Is there some kind of "Next" command ... some quick way to move on to the second photo in the same folder, after I've finished editing the first?
I'm having trouble with editing RAW images from my Nikon D3000. I've downloaded the DNG Converter from Adobe and converted all my files to DNG. However, when I opened them on Photoshop Elements 4.0, they turned out VERY grainy! (Even though all the shots are clear when viewed on my camera)
Â
Also, I could not save my files as JPG (After converting them to DNG). The only options were TIFF, PNG, JPF (?).
My workflow is as follows:
raw file, retouched in LR4
chose "edit in PSE10"
PSD file, 8 bit, srgb, 300 res
I wanted to set up a template for dealing with printing four images on a sheet.
I created an image the size of the sheet and then added four layers, each of the desired image size which needed to be positioned appropriately.
When I went to position the images, I could not find any reasonable way with the move command or with any of the layer operations to position each layer precisely.By that I mean simply type in the coordinates of the upper left corner, or move with the mouse where I see a text version of the upper left coordinate of the new layer position as I move.
If trying to position using the mouse, the lower left of the status line shows the position of the pointer itself, so that is useless in positioning the layer as a whole; and the numbers to the right of the per-cent size display show how much the layer has moved relative to its starting position, not the absolute position of the upper left corner. (I'll grant that the latter is useful, but in this case one needs something else, particularly if a layer has been moved and needs to be repositioned to a fixed location.)
The only way I could get what I wanted was to expand to 800%, and at that magnification I could grab the upper left corner with the mouse so the mouse position was itself the upper left corner position. Surely there's a better way?
Layer/Layer to Boundary Size... does not appear to work as advertised. The offset appears to be relative to the original size of the layer, not the original size of the image. The panner image is limited to the size of the layer, not the image. When you first bring up the dialog, you are unable to reposition the layer unless you change the layer size to make the layer smaller. If you make the layer half the size of its original size and then click "Center", the offset is set to - 1/2 the size of the original image, not + 1/2, which seems bizarre. The layer is scaled properly, and ends up where you would expect (based on the center command given, but not based on the offsets indicated), but the values in the Offset boxes seem to have the wrong sign. It works by moving the original layer relative to the desired new layer, rather than position the new layer size relative to the image. Which means you can't move the layer relative to the image if the layer is smaller than the image, and the graphic panner doesn't show you the layer position relative to the image as a whole. It is not at all intuitive and is not useful for quite a few common cases.
Layer/Transform/Offset shifts the contents, but not the layer itself. Which is what it is supposed to do, so that's ok; it's just not usable for this operation.
For the past one year I have been regularly editing my photographs in Photoshop (CS5 and CS3) and uploading them on my blog and my fb page.
Â
However since the past 45 days I edited 5 albums in Photoshop but have not been able to upload a single photo on fb or on any other page. I moved browsers trying chrome, fire fox and even IE but nothing worked. I then formatted my laptop and reinstalled CS5 only to know that too was not useful.
Â
I tried editing some photos in basic picassa and that worked well and was able to upload photos on fb and my blog. I then tried uploading some old photos (edited in Photoshop) and they are getting uploaded.
I've got about 1000 ten-to-twelve word "sayings" that basically need to go on index cards. I have all these sayings neatly organized in Excel.
all 1000 need to end up as a 4"x6" image.
Do I have to manually create a text layer, and cut and paste all 1000 sayings into it, one by one, saving the file each time?
I have 30 dirs, each of them with 4 thumbs in it. I want to make one big thumb of every 4 smaller ones, by resizing and fitting them together into square. Like
Thumb1 right next to Thumb2
below
Thumb3 right next to Thumb4
and then save that image.
Would you give me any direction how to do that? I'm with CS3. I did explore the auto and script options in the File menu, but still unable to get idea how to do that, if possible at all
If I import my raw images into my Lightroom 5 library and edit some of them in CS6 within Lightroom 5 by using the tab. How can I save them from CS6 back into my Lightroom 5 Library after making further adjustments?
View 9 Replies View RelatedI had a problem exporting editing images to DNG. Lightroom will only export the original unedited versions to DNG. If I export to JPG I get the edited versions, but it will not export the edited versions to DNG.
View 5 Replies View RelatedI'm a longtime user of PSP 8 and just downloaded the trial version of PSP X5, thinking to buy it. With PSP 8, if I wanted to edit two images on the screen at the same time, I loaded them both into the program and then used the minimize button at the upper right hand of each image to switch them out of full-screen mode and put them next to each other. PSP X5 no longer has the minimize buttons attached to the images. I can tab back and forth from one image to the other, but I can't figure out how to put them both on the screen simultaneously. Is this feature still present somewhere in PSP X5? How do I access it?
View 2 Replies View RelatedI'm still using PSP X3. What format more knowledgeable people for me use for editing images.
In the past, I'd take the jpeg produced by my camera, convert it to PSP format, and then when finally finished, save it as jpeg again.
I understand that the PSP format is no longer used, so should I just work in jpeg format? My understanding is that any intermediate saving would compromise image quality; if not jpeg, then what?
I'm using gimp on archlinux
GNU Image Manipulation Program version 2.8.2
git-describe: GIMP_2_8_0-194-ga42a02e
using GEGL version 0.2.0 (compiled against version 0.2.0)
using GLib version 2.34.3 (compiled against version 2.32.4)
using GdkPixbuf version 2.26.5 (compiled against version 2.26.3)
using GTK+ version 2.24.14 (compiled against version 2.24.11)
using Pango version 1.32.4 (compiled against version 1.30.1)
using Fontconfig version 2.10.2 (compiled against version 2.10.1)
using Cairo version 1.12.8 (compiled against version 1.12.2)
whenever i edit an image with gimp and try to view it in mobile phone ,it's not displaying. it's really a weird problem ...i have tried editing using other softwares such as krita and photoshop and they display correctly. I have also tried editing using gimp 2.6 and it also works fine .
If there is a way you can open up for e.g. 100 images then make changes to the image like Hue and saturation then apply it to all the images and save them all? I do stop motion and have a lot of images that i need altered in exactly the same way but i need a more simple way than 1 at a time.
View 2 Replies View RelatedHow do you make your own lightroom pre set for editing images? so when you have a lot of images, and then you can select them and apply the same pre set.
View 1 Replies View Relatedwhen importing my raw images into lightroom4 they are automatically editing how do i change this?
View 17 Replies View RelatedIs it possibe to return to a RAW image and edit it once I've exported it to another location as jpeg?
I've edited and exported an image to a different folder on my desktop. I've realised I still need to do some work on it
but when I try and open it again in Lightroom ( I see it in Library)Â I get a mesaage saying file not found...
I am using Version X6. Is there a way to show white/black clipping on images while I am Adjusting or Editing them?
View 2 Replies View RelatedRunning Xara Designer Pro 6.6.6.63205 on win7 64 bit
How to handle this scenario:
I have several photoshop images loaded into xara and trying to make a sensible 4 way arrangement of 4 images. Imagine that one image is outsized compared to the others and needs to be cropped.
I open the original image in photoshop and make the edit, now what is the most expeditious way to refresh/replace/reload... etc the newer state into xara.
I don't see any replace/reload sort of menu item anywhere and have just been deleting the the bad image and reimporting the newer one.
Is there a way to hide the checkerboard while editing? I need to be able to see through the clear areas whilst positioning the object,but i cannot find anything on Google.
View 5 Replies View Related