When I preview an image in windows, the properties panel says my file is only 958KB with dimensions 2400 x 2369. But when I open the file in photoshop (I have CS6) , it says my file is over 16MB with the same dimensions.
View 2 Replies
Recently I moved to CS3 from CS2. Now I notice that files I made in CS2 with particular settings weighted around 27 megabytes, 30 megabytes tops. These exact files weight 40 megabytes when saved in CS3. I think this is an ARGH!,
But picture this: maybe many of you have heard that if you hide the layers before saving the PSD, then the file size will be significantly smaller upon save. I tried this tip and it worked indeed. My CS3 files do weight as much now as they should, though without the layers shown. No chance this way to look at them, manage them with an image viewer etc.
is this a known and existent issue in CS3, does CS3 save and reveal some senselessly large "blind data" that CS2 could manage easily?
I am trying to optimize some images for web to have a smaller file size. I am using "Save for Web" feature, and every time I try to save a file, the actual file output size is a lot bigger than the size it shows on the "Save for Web" dialog.
For example, I have a 607 bytes .gif, when I open "Save for Web" it shows 207 bytes for 16-colors but when I save it the output file is 1.22 kb.
Attaching a JPG to an email, says its a larger size than the original?
View 2 Replies View RelatedUsing Premiere Pro CS6, I'm trying to figure out why it's doing this:
I imported a video into a new sequence and made sure to match the sequence settings with the video's. I do some basic editing (not adding more video or anything like that) but when I choose to export media and have it match the sequence settings, the video appears to have the exact same attributes as the original video (minus my changes) except the file size is 2-5x larger.
I've been using GIMP to make GIFS for a long time now, but recently the "optimize for difference" option I've used is having the reverse effect it should have- ie, it's making the file larger. Here's an example. It's the exact same image, same dimensions, same amount of colors. The first one is unoptimized, each frame is a full picture, and it's file size it ~149kb. The second one is the same as the first, except optimized with about ~50% of the pixels removed from each frame (except the first frame obviously), and yet it's file size is ~155kb. I can not for the life of me figure out why an image with most of it's pixels removed is creating a larger file size. [URL]...
View 3 Replies View RelatedI'm running PSPX3. the effect of no compression (or compression factor = 1) on saving files. I've got a JPEG image file straight from my camera that's approximately 4.1MB in size. If I do nothing else but "Save As" with a compression factor of 1, the new file size is approximately 50% larger, or 6.2MB. What has changed to make the file size larger? Both images are still 72DPI, 3648X2736px. I can't image that I have done anything to "improve" image quality, so why did the file size increase?
View 14 Replies View Relatedrestore the the ability of Photoshop to open with a preview on windows machines. That is; a single click on a file from within Photoshop gives a small preview image to tell you what it is you are opening. This is crucial to professional photographers in the industry working quickly with lots of images as I do in the medical/scientific photography field.
Every other version of Photoshop has had this feature and I can tell you a lot of power users like myself are not using CS6 just because a single click doesn't preview what you are opening. My company just spent $10,000 upgrading six machines and no-one is using CS6 for work - they are sticking with CS5. CS6 is only good for 'playing around' with photos, if production is key, then to save time, we need to see what we are opening on a single click - it's a no brainer! Check the forums to see this that is true, and if you are reading this and agree with me, write and tell adobe to fix this - pronto!
In Photoshop CS6, if you save a picture as a 32-bit JPEG, there is a little bit of words saying how preview and file size is only available in 8-bit, and then it spells available a second time incorrectly "available".
View 5 Replies View Relatedi have a drawing file which is corrupted with unknown reason , windows explorer is displaying file preview but anyway autocad is crashing when i try to open this file .recover and open file in another version solutions are not working..how can ı open my corrupted file?
View 5 Replies View Relatedwhere the setting for the size of type/font preview drop down is located in CS6, it used to be located under pref->type->type preview - but apparently not anymore. I'm probably "blind", they surely did include this option in CS6?
(A thing I find annoying in CS6 is how short the font drop down list is, only covers 1/3 of the height of my resolution, even though I have hundreds of fonts activated - requires a lot of scrolling! I really hope this gets larger if it is possible to have larger previews)
I'll come straight out and admit: yes, my real problem here is my laziness but, ignoring that, the 'problem' I have is getting so tired of and annoyed with the whole trial & error schtick that comes with saving animated gifs (scale image, save, check file size, repeat to first step until file size is finally desirable).
Two possible solutions come to mind, one I admit is probably quite unrealistic but I would think the other has a good chance of existing.
First, the unrealistic solution possibility. Is there a plugin or anything else where I can input a file size and it could calculate the exact (or close to exact) scale I would need to resize to if I want the gif to be around that file size? (i.e. "For this gif to be 879kb your best bet would (probably) be 515 x 283")
Now then, the more realistic (or at least I think it is) solution possibility. What about being able to preview a file size of an animated gif before saving? (i.e. "If you save this 400 x 226 gif it will most likely be '(insert byte size here)'kb")
where you have a smaller preview image and you click it to open a larger version. I'm sure there's something super simple that I'm overlooking somehow.
View 2 Replies View RelatedWe can preview the DWF files in Windows Explorer with Windows XP but cannot seem to be able to with Windows 7 64.
View 7 Replies View RelatedI'm using Adobe Photoshop CS2 - and I've run into a awkward problem. I cannot get it to write text in larger than font 72. When I'm trying to insert text - it has the default sizes 6-72 for font size. Other is grayed out (always is, never seen it as an option to actually choose).
I've been reading multiple tutorials for help on Photoshop and many of them mention using a font larger than 72 for watermarks or whatever else may be.
No matter what font I choose, other is always grayed out. I've scavaged through their help files and can't find anything even remotely close to this issue - so wondering if anybody else has run into this?
I am snapping from Nikon Coolpix L1 camera into 6.2 MPixel mode. When It comes to photoshop, I can see that the normal document size is, Width : 9.387 in and Height : 7.04 in (I am giving this reference from menu Image->Image Size).
Now, I am reducing this document into a size of W=5.347" x H=4.01" size for printing. Taking four nos. of similar documents and trying to paste all four documents into a single sheet of size 12"x8". This is because that the printing cost of a 12"x8" paper will be least, and that is why I am trying to compose four 5.3"x4" photographs into a single 12"x8" paper.
But the problem is that, when I am trying to paste (using copy-paste or drag-n-drop) any of the source pictures into destination sheet, the picture in the destination sheet is expanding and filling all the space of 12"x8".
What is the problem?
I am using Photoshop Elements 6.0. I need to make my text 600 pt, but whenever I go that large my text disappears. I can only go up to about 450 pt before it disappears.
View 2 Replies View RelatedI just installed elements 11. The font size on many of the selections is small, too small to easily see with my level of vision (bifocals). Examples are the Quick and Guided edit menu picks, the popups when you curser over a tool. How to make the type size larger?
View 1 Replies View RelatedI am trying to reduce the file size on a large number of jpeg photo's for unsertion into Windows Movie Maker. How do I compress the slides in a batch job? Can I do it in Photoshop Elements?
View 1 Replies View RelatedI have changed Canvas size a thousand times in my life and this has never happened before.
I have an image that is 1600 px wide and I want to trim the sides to 1260. When I start to even type in the smaller size, the file size indicated is larger (that was my first suspicion that something was not right). And sure enough, it is making the image larger?
I just went through and cropped a bunch of images as a 5x7. When I re-opened the images to put our studio logo on them (using an action) the images are a similiar ratio to the 5x7 size that I cropped the image, but they are not actually a 5x7 so my action no longer puts the logo in the correct place on the image. Is there a way to get the crop tool to not give me a ratio but actually size the image to the size that I input into the boxes? I don't want to have to re-do all of my logo actions to fit the ratios.
View 2 Replies View RelatedI'm in PSE 10 and when I crop a small portion of an image and accept the crop, it remains a small image instead of snapping to a larger image like it did in PSE 6. I know there must be some way to have the small image automatically made larger rather than having to click on the magnifier and "+" and then on the image until it is a size I can work on. I've checked the FAQs and Photoshop Elements 10 but can't find the answer.
View 2 Replies View RelatedWhen adding text as a watermark how can you make it bigger than 72?
View 5 Replies View RelatedI have found this post from April where the bug was acknowledged in the beta:
[URL].........
I now have the official release of CS6, and I am still seeing this issue. And for clarification, here's what the issue is:
- I start off creating a text layer with a font size of 20px.
- I then transform this layer to make it larger.
- I copy the layer over so I have identical text layers.
- When I select each individually, I am shown the new, larger font size, we'll just say 40px. But when I select both together, it shows the original font size of 20px in the character palette. When I increase the font size with both selected to say 30px, it actually makes the text more like 60px.
Will this bug actually get fixed?
I want to print my CAD drawing, but when I select DWG to PDF, the largest size it provides is A0. Is there a way to make a custom size within the plotting manager?
View 3 Replies View RelatedIn the new Image>Image Size dialog box, the preview is always at 100% which seems a bit disorienting.Is there a way to set that to default to "fit".
View 6 Replies View RelatedI am creating colage images in Photoshop CS4. I sometimes use scanned vintage daguerreotypes or other small snapshots. They are often small sized at 3.5" x 4.5" or 4.25" x 5.5". My Epson 835 scanner can scan in at 300, 400, up to 800 dpi. If I intend to print these scans at 8x10, 11x14 or a larger size within the overall collage, should I scan in at the highest dpi allowed by my scanner? Does this make a real difference after 300 in resolution/clarity?
Also, Does Photoshop CS4, in the enlarging process, as I bring the smaller image into my composite and stretch size it up with (T) tool, end up just making "junk pixels" using "Bicubic" or "Bicubic smoother" in the printing from flattened PS file, even tho I scanned in at a high dpi? scan in at best dpi so that the image won't be pixelated, lose resolution as it is used larger inside the final composite collage.
so i downloaded the copasetic font and am trying to use it in a picture, and i can get a text box to appear and i can write the words i want, but i cant change the size to anything smaller or larger than what it starts out at. ive tried changing the size before i start typing, and its the same thing.
View 2 Replies View RelatedWhen I create a new file in AI CS 6, the artboard is larger than requested size, which shows up as a box within the too-big artboard. For example, when I create a new file, I set the artboard size menu to 1200 pixels wide by 750 pixels high, but the artboard created is about 6,000 pixels high and wide, with a black outline of the 1200 x 750 artboard that I tried to create.The actual artboard is much larger than the white area; I just cropped most of it in my photo software to show it here. What setting in the preferences or other menus fixes this problem? I didn't have it until today, so something got set incorrectly somewhere. I usually just see the 1200 x 750 white artboard against the dark background. It also seems to be happening now when I simply open an existing file. The artboard has suddenly increased to an enormous size.
View 9 Replies View RelatedI've recently started using Paint.NET and I've been very impressed with its features. I've run into some problems working with large images though. URL...
It's a 10000 x 11299 pixel PNG image. I want to be able to zoom in quite far in order to look at some of the fine details, and make some notes on the image while I go. Unfortunately, as I read elsewhere on this forum, it seems that Paint.NET currently doesn't support a virtual canvas size greater than 32768 x 32768. On this image, that means I get a maximum zoom of 290% before I can't zoom in anymore, which isn't very much. Right now I'm having to use the "Windows Photo Viewer" to actually view and zoom into the image, while making the notes zoomed further out in Paint.NET, which is a bit cumbersome.
I know this is probably non-trivial to fix, but it would be fantastic if you can remove this barrier on the maximum virtual canvas size.
I have something going on when I export from Illustrator as a PSD using the artboard. It ends up with a line of transparency around the edges, and is larger than the size of the art exported. It gains about .01 inch around the edges, and when I use 'trim transparent pixels' in Photoshop, it trims it down so it has only gained .07 inches around the edges, but doesn't lose the last line of pixels that are semi-transparent. I am using a script that exports it, then re-imports it and places it in the Illustrator file, effectively swapping the vector for raster. It's part of a larger process I have no control of, so the process is not something I can change, otherwise I wouldn't do that.
Why is it exporting with this line of transparency on the edges? It's causing white lines to show up in the file that it gets reimported to. Until now it was ok because it only shows in the bleed, which gets trimmed off. From now on, though, this process is supposed to be used for non-bleed items, and the white lines are showing up.
