Illustrator :: Transparent Edges In PSD - Larger Than Size Of Art Exported
Nov 26, 2012
I have something going on when I export from Illustrator as a PSD using the artboard. It ends up with a line of transparency around the edges, and is larger than the size of the art exported. It gains about .01 inch around the edges, and when I use 'trim transparent pixels' in Photoshop, it trims it down so it has only gained .07 inches around the edges, but doesn't lose the last line of pixels that are semi-transparent. I am using a script that exports it, then re-imports it and places it in the Illustrator file, effectively swapping the vector for raster. It's part of a larger process I have no control of, so the process is not something I can change, otherwise I wouldn't do that.
Why is it exporting with this line of transparency on the edges? It's causing white lines to show up in the file that it gets reimported to. Until now it was ok because it only shows in the bleed, which gets trimmed off. From now on, though, this process is supposed to be used for non-bleed items, and the white lines are showing up.
View 13 Replies
ADVERTISEMENT
Jan 30, 2013
When I create a new file in AI CS 6, the artboard is larger than requested size, which shows up as a box within the too-big artboard. For example, when I create a new file, I set the artboard size menu to 1200 pixels wide by 750 pixels high, but the artboard created is about 6,000 pixels high and wide, with a black outline of the 1200 x 750 artboard that I tried to create.The actual artboard is much larger than the white area; I just cropped most of it in my photo software to show it here. What setting in the preferences or other menus fixes this problem? I didn't have it until today, so something got set incorrectly somewhere. I usually just see the 1200 x 750 white artboard against the dark background. It also seems to be happening now when I simply open an existing file. The artboard has suddenly increased to an enormous size.
View 9 Replies
View Related
Aug 12, 2012
I have my artboard set to 700 px x 700 px. When I export as PNG the file is 2917 px x 2917 px. Why isn't it the size I set?
View 5 Replies
View Related
Jan 21, 2014
Exported photos are 5x larger (3.5MB to 16.5MB)
View 6 Replies
View Related
Sep 19, 2012
I made something exactly 14 inches in illustrator according to the AI ruler. When I print it, it is larger than 14 inches - over 14 1/4 in. Print settings are set to do not scale.
View 3 Replies
View Related
Jan 17, 2014
I am trying to crop and straighten my 35mm slide scans. When I imported the scans the average file size was 5mb but after cropping and straightening the scans in lightroom 5 and exporting them, the average file size was 15mb! There is no increase or decrease in quality.
View 1 Replies
View Related
Dec 7, 2012
I am working on a Mac (Snow Leapord) with Photoshop CS6. When I try to save a sliced and transparent PSD in the Save For Web dialog box with PNG-24, the transparency dissapears once exported. I have the transparency and interlaced boxes both checked. The images appear transparent in the Optimized Save for Web dialog box, but the transparency dissapears once exported out of Photoshop.
I never had a problem with this when I was using CS4...
View 1 Replies
View Related
Feb 17, 2014
I recently invested in CS6 Production Premium and I've just tested legacy support by saving an Illustrator CS6 image in CS4 format.
The image contains a number of semi-transparent gradient meshes used for highlights.
Having loaded the saved CS4 .ai file in CS6, white lines appear along my semi-transparent gradient meshes (see the attached screenshot).
What's happening is that the anchor points with 0% opacity in CS6 suddenly have 100% opacity when I load the saved CS4 files in CS6.
Is this a known error? If so, how/where do I report it?
Here are the relevant CS6 and CS4 files: [URL] ....
There are no white lines when I save the image in CS5 format and load it in CS6.
View 2 Replies
View Related
Feb 25, 2013
I have to do an online pdf report for a customer. But when I made the pdf through publish to pdf option the font looks jagged. The header is Kozuka and for the body calibri. I tried various options but results are the same.
When converted to outline it looks fine the jagge dends disappear, but cann't edit.
View 9 Replies
View Related
Jul 9, 2011
I am working on an anime picture. I want to have two of the same images, one larger, with no background, and transparent. The other will be just the image. I have that done, but how do I get rid of the checkerboard pattern, it's difficult to work with it in the way. Also, both images move together, how do I stop that from happening?
View 6 Replies
View Related
Jun 25, 2012
I'm trying to export a JPEG so that the file size is smaller, for use on the web. So the file I have is 1.1 MB. I try to export via LR4 using the percentage slider, but no matter what percentage I use, the file size is always GREATER than 1.1 MB! And if I try to limit the size by inputing a value, say 1000 kb, I get an error message saying I can't do that for some reason:
Also, this is not the case with just one file, it is numerous files.
View 5 Replies
View Related
Feb 8, 2012
I am trying to make a png (tried a gif too) by going to File >>> Export for Web.
In the new window I selected following: -
Format: PNG
Color Mode: RGB color (24 bit)
Transparency Box: Checked
In Advanced, Anitialiaced Box : Checked
Embed color profile Box: Unchecked
Interlaced Box: Unchecked
Resolution 72
The image displays in comparison window as transparent but when I save this image and upload it on my website, the background changes to black instead of transparent.
I am using windows 7 Premium (64 bit) and Corel Draw X5.
make it a transparent background image.
View 6 Replies
View Related
May 31, 2011
Running Designer pro 6.1.2.13287 on Windows 7 Home Premium
I'm probably bumbling around and buggering up the export of png formatted images, but it appears something besides transparency is getting exported as backbround.
I do `Select all' then export to png.The poorly drawn green arrows were added in photoshop to show the area I'm talking about. The xara document which is apparently also getting exported in some way.At least certain other tools see a black background in that area. Not all tools have that problem with the image. For example; photoshop sees only transparency there.
But when I browse the exported *.png files with `Epson print CD', it sees black in that area as illustrated by the screen grab below.The first two images look clean as expected (I'll explain in a moment) but the third (the one that hasn't been cleaned in Photoshop) shows the black background in that area.
The first two were cleaned up in photoshop and now appear clean as expected.So to get a usable image for import into Epson's tool I must:
1) Export as PNG from Xara
2) Open with Photoshop and run thru a procedure where anything outside the outer blue ring in the image is deleted.(Even though PS only sees transparency, if I select everything from the blue ring outward and delete it, saving back to png, then Epson's tool sees transparency there)
3) Import into `Epson Print CD' and print the graphic to a printable DVD.
How can I skip the second step? That is, how can I get a clean export in step one? What is it that some tools are seeing as black background?
View 9 Replies
View Related
Sep 18, 2013
I have been working with Xara for two days now, and it's great! I am using the trial version of Xara Photo & Graphic Designer 9. I created a file with a couple of transparent shapes (love the transparency tool - so easy!), and it looked great. I exported to .pdf, and the transparent gradient was all gone. The shapes are there, but have no gradient whatsoever.
I also exported it as a .jpg and the gradients are present in the .jpg. In other words, the .xar file looks great and the .jpg looks great. Just the .pdf doesn't work.
View 9 Replies
View Related
Dec 27, 2012
exported transparent png fiiles get this rainbow of color distorted bleed when previewing or importing into programs that cannot read the png's transparency!!! even program that can read the png's transparency after you check a 'make transparent' checkbox (such as Memorex Expressit label design studio) have this distorted color bleed!! like in the label program checking 'make transparent' leaves the rainbow color distortion in!!!
this seems to be ONLY happening with Gimp exported PNGs!!! other PNGs and other programs that can generate transparent PNGs don't have this issue!
View 8 Replies
View Related
Jul 5, 2008
Recently I moved to CS3 from CS2. Now I notice that files I made in CS2 with particular settings weighted around 27 megabytes, 30 megabytes tops. These exact files weight 40 megabytes when saved in CS3. I think this is an ARGH!,
But picture this: maybe many of you have heard that if you hide the layers before saving the PSD, then the file size will be significantly smaller upon save. I tried this tip and it worked indeed. My CS3 files do weight as much now as they should, though without the layers shown. No chance this way to look at them, manage them with an image viewer etc.
is this a known and existent issue in CS3, does CS3 save and reveal some senselessly large "blind data" that CS2 could manage easily?
View 1 Replies
View Related
Mar 4, 2012
I want to print my CAD drawing, but when I select DWG to PDF, the largest size it provides is A0. Is there a way to make a custom size within the plotting manager?
View 3 Replies
View Related
Jan 20, 2006
I'm using Adobe Photoshop CS2 - and I've run into a awkward problem. I cannot get it to write text in larger than font 72. When I'm trying to insert text - it has the default sizes 6-72 for font size. Other is grayed out (always is, never seen it as an option to actually choose).
I've been reading multiple tutorials for help on Photoshop and many of them mention using a font larger than 72 for watermarks or whatever else may be.
No matter what font I choose, other is always grayed out. I've scavaged through their help files and can't find anything even remotely close to this issue - so wondering if anybody else has run into this?
View 3 Replies
View Related
Oct 16, 2012
so i downloaded the copasetic font and am trying to use it in a picture, and i can get a text box to appear and i can write the words i want, but i cant change the size to anything smaller or larger than what it starts out at. ive tried changing the size before i start typing, and its the same thing.
View 2 Replies
View Related
Jun 18, 2013
I thought this was going to be a piece of cake in the new Illustrator CC but I am having a few unanticipated issues:)I need to create some vector tire images with different edges, such as the top one in the image below.So I thought this would be SO easy by simply creating a pattern brush in Illustrator and then using that for the outside. So I created the shape you see in the middle image below and created a pattern brush with this shape.I then created an ellipse and used the new brush for the outline.
All of those are open paths...it has taken the shape and applied it to the outline but has kept each shape separate, so I am not able to fill the circle in black. I could of course go in and manually join each little corner separately where the little shapes meet but this will take FOREVER with all the images I have to do.
View 7 Replies
View Related
Dec 10, 2012
When I preview an image in windows, the properties panel says my file is only 958KB with dimensions 2400 x 2369. But when I open the file in photoshop (I have CS6) , it says my file is over 16MB with the same dimensions.
View 2 Replies
View Related
Nov 7, 2006
I am snapping from Nikon Coolpix L1 camera into 6.2 MPixel mode. When It comes to photoshop, I can see that the normal document size is, Width : 9.387 in and Height : 7.04 in (I am giving this reference from menu Image->Image Size).
Now, I am reducing this document into a size of W=5.347" x H=4.01" size for printing. Taking four nos. of similar documents and trying to paste all four documents into a single sheet of size 12"x8". This is because that the printing cost of a 12"x8" paper will be least, and that is why I am trying to compose four 5.3"x4" photographs into a single 12"x8" paper.
But the problem is that, when I am trying to paste (using copy-paste or drag-n-drop) any of the source pictures into destination sheet, the picture in the destination sheet is expanding and filling all the space of 12"x8".
What is the problem?
View 3 Replies
View Related
Mar 1, 2012
I've recently started using Paint.NET and I've been very impressed with its features. I've run into some problems working with large images though. URL...
It's a 10000 x 11299 pixel PNG image. I want to be able to zoom in quite far in order to look at some of the fine details, and make some notes on the image while I go. Unfortunately, as I read elsewhere on this forum, it seems that Paint.NET currently doesn't support a virtual canvas size greater than 32768 x 32768. On this image, that means I get a maximum zoom of 290% before I can't zoom in anymore, which isn't very much. Right now I'm having to use the "Windows Photo Viewer" to actually view and zoom into the image, while making the notes zoomed further out in Paint.NET, which is a bit cumbersome.
I know this is probably non-trivial to fix, but it would be fantastic if you can remove this barrier on the maximum virtual canvas size.
View 5 Replies
View Related
Jan 30, 2013
I am using Photoshop Elements 6.0. I need to make my text 600 pt, but whenever I go that large my text disappears. I can only go up to about 450 pt before it disappears.
View 2 Replies
View Related
Dec 18, 2012
I just installed elements 11. The font size on many of the selections is small, too small to easily see with my level of vision (bifocals). Examples are the Quick and Guided edit menu picks, the popups when you curser over a tool. How to make the type size larger?
View 1 Replies
View Related
Jul 9, 2010
I need the brush size for the write-on effect to go larger than 50.
View 4 Replies
View Related
Jan 18, 2014
Using Premiere Pro CS6, I'm trying to figure out why it's doing this:
I imported a video into a new sequence and made sure to match the sequence settings with the video's. I do some basic editing (not adding more video or anything like that) but when I choose to export media and have it match the sequence settings, the video appears to have the exact same attributes as the original video (minus my changes) except the file size is 2-5x larger.
View 10 Replies
View Related
Feb 5, 2009
I have a high quality but small jpg picture that I need to put onto my website, the background colour is blue.
I want to blur all 4 edges of the picture so when I put it on the website page the background shows through with a nice faded effect into full opacity of the picture in the centre of the image.
I'm sure its pretty straightforward, but I can't work it out. I played around with the marquee tool but couldn't delete the outer edges like I had hoped.
I'm pretty sure it will need to become a .png of .gif to show the transparency but I'm worried about the quality then too.
View 3 Replies
View Related
Jul 27, 2009
I want to fade (make transparent) the edges of my image which is a pasted one in the whole document in order the image's edges to smoothly become transparent and faint so the image will blend with the background in the document. Do you know how I can do this? Is there a filter which I could apply to the whole image, or to every edge of the pasted image?
View 4 Replies
View Related
Nov 9, 2013
I have changed Canvas size a thousand times in my life and this has never happened before.
I have an image that is 1600 px wide and I want to trim the sides to 1260. When I start to even type in the smaller size, the file size indicated is larger (that was my first suspicion that something was not right). And sure enough, it is making the image larger?
View 2 Replies
View Related
May 30, 2012
I just went through and cropped a bunch of images as a 5x7. When I re-opened the images to put our studio logo on them (using an action) the images are a similiar ratio to the 5x7 size that I cropped the image, but they are not actually a 5x7 so my action no longer puts the logo in the correct place on the image. Is there a way to get the crop tool to not give me a ratio but actually size the image to the size that I input into the boxes? I don't want to have to re-do all of my logo actions to fit the ratios.
View 2 Replies
View Related
