Photoshop Elements :: What Is The Best Way To Start A Flyer From Scratch
Aug 27, 2013What is the best way to start to make a flyer?
View 16 RepliesWhat is the best way to start to make a flyer?
View 16 RepliesI just installed PS CS and it gives me the error
Could not initialize Photoshop because the scratch disks are full.
is there anyway i can like start PS in a safe mode to set the scratch disks?
I have just installed Lightroom 4 and want to get started by setting up more than one catalogue but I am not sure if you have to have one catalogue for every photo in addition to the separate catalogues I want for subsets of photos. Can I just go ahead and make several catalogues and sort my photos (which are on my hard drive) into them without making a catalogue that references every photo? Maybe it's a good idea to have one complete catalogue as well in order to make it easier to find that missing photo?Also I have read that it is a good idea to store catalogue files in a separate folder in the root, which appeals to my sense of organisation, but do I need to make separate sub-folders for my individual catalogues or can they just all go into the one folder? Can't wait to get started!
View 14 Replies View RelatedACAD 2009 on XP
Third party software installed which now causes AutoCAD 2009 to crash when a single key is pressed. We have uninstalled the software, however the editor is still looking for the
Non-existent ARX. This is the problem. What file or registry key declares the list as shown in APPLOAD? I have verified 2009 works in the administrator profile.
We also did a repair and then a reinstall of 2009 to no avail. What steps are needed for AutoCAD to build a profile when a previous profile existed?
I have an App developer that is requesting an .AI file for developing an App that can be utilized on all the following Apple hardware (iPhone 4, iPhone 5, iPod touch, iPad, iPad mini). He is insisting on it, because of the vector file. I have a design file that was completed in a layerd PSD. I want to know what, if any, quality is lost from converting from PSD to .AI vector file? Would it be better to have the Designers strach over from Scratch?
View 1 Replies View RelatedWhen I first installed Adobe Photoshop CS6 I was unable to run Photoshop or Bridge CS6. Photoshop would give me an error about "could not open a scratch file because the file is locked. If I ran either of these programs as an administrator they would run without issue, this led me to believe that there was a permission issue somewhere. After some digging I found out the both Bridge and Photoshop try to create a temp file (similiar to Photoshop Temp2777223910092) on the c: drive of the computer. In my case the user that I was logged in with did not have access to write to the root of the C: drive. Note that you run the program as the administrator and change the scratch disk location as that changes the preference for the administrator user and not the user that you are currently logged in as.
I first had to give the user that I was logged on with write permissions to the root of the C: drive. Next try and run Photoshop, you will get an error another error about the scratch disk and about and invalid or missing setting file. To correct this you need to have run Photoshop as an administrator, next you can go to Users AdminAppDataRoamingAdobeAdobe Photoshop CS6Adobe Photoshop CS6 Settings and copy Adobe Photoshop CS6 Prefs and/or Adobe Photoshop X64 CS6 Prefs to Users<your logged in username>AppDataRoamingAdobeAdobe Photoshop CS6.Adobe Photoshop CS6 Settings.
If I have 4 Scratch disks does photoshop use all scratch simultaneously or does it wait for the first scratch to fill up before it starts to use the next one ?
View 1 Replies View RelatedWhat does scratch disk full mean???
View 3 Replies View RelatedI just installed PSE 11 yesterday (Sat). I played with Organizer for a while, first. While there, I edited My preferences. One of the things I changed was the location of the scratch file. I set it to the root DIR on the D: HD, which has only a scant few Win files on it. This is a 1.5Tb HD with mostly free space. Now though when I select the editor, PSE tells me that either the file is locked or I don't have permission to access it.
When I investigated this on D: using Win Explorer, the file, apparently, doesn't exist. I tried going back to Organizer & editing preferences, but wasn't able to see an option for setting the scratch file. So now PSE Editor loads fine. How do I properly move the scratch file from the C: HD to the D: HD?
My system is Win 7 (64),This is a brand new PSE 11 installation, I haven't added anything to it,My C: drive has 60gb free and is a 120gb SSD.I have 8gb system RAM.
I've been editing very large images with many layers recently, and I noticed disk performance issues - so I thought that by changing my preferences to set the scratch disk to the D drive, I might improve things (more available space, not competing with Windows disk usage, etc).
Now when I launch PE, it throws up an error: 'Could not open a scratch file because the file is locked. Use the properties command in the Windows Explorer to unlock the file' and refuses to open. However, it doesn't say what file it's trying to open, so I don't know how to fix it - and I can't get into PE to change the preference back to the C drive.
Unfortunately the preferences file isn't ASCII so I can't edit it manually. Added a half-hour later: By simply removing all the setup files I can get back into PE, but I'd still like to know what folder(s) and/or file(s) PE is trying to create on the D drive, so that I can see if there's any performance improvement.
When I try to open Elements it says the Scratch Disks are full. How do I correct this problem?
View 4 Replies View RelatedI purchased elements 11 last year to not only edit photo's but also to create my own greeting and announcement cards.I'm having trouble figuring out how to create a greeting from scratch. It seems as if I can only use Adobe's templates. Is there any way I can create my own?
View 2 Replies View RelatedInstalled Photoshop Elements 11 and get an error msg when I try to open "Unable to initialize Photoshop Elements because the sratch disks are full"
Running Dell/Windows 7...Have 1.8TB hard drive with 1.3TB free.
All my MACINTOSH versions of Photoshop - S5, Elements 10, Elements 11 - display the opening start screen, but ABORT THE LAUNCH of the EDITOR with the error message:
"Could not open scratch file because of disk error."
"Could not initialize Photoshop Elements because the preferences file was invalid (it has been deleted)"
I have cleaned up my external disks so that they all have at least 100GB of free space
How can I correct this so that I can recover the Preferences, re-establish the Scratch Disk, and launch the Photoshop Editor?
I have Photoshop Elements 10. It worked until I upgraded to Mountain Lion.Now when I try to open it, I get two error messages: 1: "Could not open a scratch file because the disk is not available." 2: "Could not initialize Photoshop Elements because the disk is not available."
View 5 Replies View RelatedJust intslled Elements 2.0 on my HP Pavillion running Win 7 (64-bit) and got "Could not initialize Photoshop Elements because the scratch disks are full". What gives, what this is referring to.
View 1 Replies View RelatedI'm using Elements 6 on a 10 year old iMac. Great results until recently receiving message stating "Scratch disk (or startup disk) is full. Remove files to make more room. I get that and manual and iMac
View 10 Replies View RelatedWhen I try to start the program for the first time - just installed it - I get the error message "Could not initialize Photoshop Elements because the scratch disks are full". The error is a fatal one - big cross on the left had side - program closes when you press OK
View 12 Replies View RelatedPSE10 using Windows 7 64bit system. When I use the Dust and Scratch filter, I can see the improvement in the photo (or the inset) , but when I click OK, it goes back to the way it was. This happens whether I use "Preview" or not.
View 1 Replies View RelatedI have seen in the past how people have put together a flyer size document with various photos etc blended in with invitation details like venue, date etc.
The question is how and where do I start?
how to begin this little adventure of mine?
What are some fonts that look good for flyers?
Whats the font on this flyer?
Just gotta do a A6 Flyer which will be printed by a priniting company.
Just checking should the bleed size be 2mm?
I made a flyer in Photoshop, I saved it as a JPG. Then I went into my email client AOL to insert it into the body of the email to send out to my clientele. I sent it to myself first to check the resolution etc. The problem is I cannot get it to keep the orginal aspect ration within the email. I compared it to other flyers sent to me, that were produced in Photoshop, I checked all the specs and everything in them matched mine. When I put them into the email the retained their orginal format.
View 12 Replies View Relatedam trying to send a jpeg format flyer to an arts center ...am having a big event...managed to get the type in..have 2 photos I wish to import...can't figure it out...am used to Publisher...insert/import image...bang..done! I reduced the image size already...have the 2 files up ...
View 3 Replies View RelatedHow can I remove bullet points from a flyer created in photoshop?
View 1 Replies View Relatedhow to do a silver kind of chrome in photoshop and then when it prints out how to make it come out shiny and not a dull gray.
View 6 Replies View RelatedI'm trying to print a flyer that has art on the front and back. I copied the images from Photoshop CS to Microsoft Word on page one and two. I then printed page one and then turned the page over and printed page two on the back. Though I have the same settings for page one and two in Word, it's not aligning.
Is there another way to do this so I can get perfect alignment for the front and back of the page. Can I do this with Photoshop or should I use a table in Microsoft Word or should I use another program altogether like Adobe Pagemaker or Quarkexpress.
the 7.4 raw plug-in will not start / run all the time - using element 11
View 4 Replies View RelatedMy PSE9 organizer wont start. When I select organizer from the welcome screen it immediately goes back to the desktop.
I'm running Vista Home premium SP2. The product was working OK until about a week ago but now wont open.
I have renamed the PSA file and the Status.dat file but no luck.
I have tried to get to catalog manager by CTRL-Shift on selecting organizer from the welcome screen but it just goes back to the desktop.
The Editor appears to work but I can't access Organizer from there either--nothing happens.
I cannot get the duplicate search feature to find my duplicate photos in elements 10
View 8 Replies View RelatedPhotoshop Elements 8 crashes when trying to start Organizer. Funny, that starting the Photoshop Editor is not a problem and works fine.I reinstalled the software and then installed it again, but had no effect.
View 7 Replies View Related