PSE10 using Windows 7 64bit system. When I use the Dust and Scratch filter, I can see the improvement in the photo (or the inset) , but when I click OK, it goes back to the way it was. This happens whether I use "Preview" or not.
View 1 Replieswhen I select an area of a photo and attempt to use the 'dust and scratches' filter, Elements 11 jumps to the 'Hand Tool' and locks up. This is on a Windows 8 machine.
View 3 Replies View RelatedUsing the 64-bit extended CS6 version under Win 8/64. Am I not using the filter correctly, or is this a limitation regarding its use?
I duplicate a layer and apply the filter. I then add a white mask and invert it to get black. I change the layer blending mode to either darken or lighten, depending on the requirements at hand. I use the paint brush to remove the spotting and it works. However, if I add a new layer and then go back to the Dust and Scratches layer, the paint brush further modify the layer. I need to create a new layer and start all over again.
I am finding that if I convert the layer for smart filter use, I cannot use the paint brush. The layer needs to be rasterized, again.
I am running Photoshop CS6 with all updates on a Windows 8 system. I have several keyboard shortcuts set up that all work fine but when I assign a keyboard shortcut for the dust & scratches filter it will work until I close Photoshop - when I then open Photoshop again this shortcut is gone but all my other shortcuts remain.
I have tried going back to the default keyboard shortcuts and then adding just the shortcut for dust & scratches (I have tried ctrl-F8 and several others) and then closing Photoshop and opening it again with the same results. I was able to add back all of my other shortcuts and they work fine.
For some reason I can assign a keyboard shortcut to anything except the dust & scratches filter.
Windows 7 HP, 16GB, Photoshop CS6 Extended
Lens correction filter causes immediate crash of Photoshop.
I have CS6 with the most recent updates and RAW 7.1.
First: When I crop an image (I am using the new crop tool), and I make sure I have cropped it (hit enter after adjusting the box), if I then try to use the Lens Correction filter, it will not load the cropped version of the image but only the uncropped version. (CS5 did NOT do this). This makes using the Vignetting tool impossible to use, since when the image gets sent back to the main PS window, it shows up as cropped again, and the area corrected is out of range! The only way I can now use the tool is to save the cropped image to a new file and then open it up in a new PS window and THEN edit it with the lens correction filter.
Second: When I was trying to open and process some RAW files today, whenever I used the sharpening tool, it would preview just fine on the RAW window, but when I opened the file after finishing my adjustments, all of the adjustments would still be there EXCEPT the sharpening and NR ones. It did not matter if I saved the image to different file types, or opened it directly; the adjustments made with that set of tools were lost outside of the RAW window. This is definitely not the way CS5 worked.....and it seems like a bug.
Third: I know this is not a bug, how to change what the files do, since I can't find where to set this. When I open a JPG file, if I do any work to it at all, it then automatically gets saved as a PSD file unless I select JPG from the pulldown menu. How in the world can I get this pulldown to NOT automatically go to PSD when I am working with JPGs? It is an extra step that just gets in my way.
I have a Window Vista64 Intel Core2Quad CPU Q7600 processor machine with 6GB RAM and a Nvidia GeForce GT 430, with the latest updates.
I think that ACR uses same lens correction profiles with the filter in PS.
There is only one profile for Canon EF 100 mm f/2.8 L Macro IS USM, but I get two different results when correcting in PS and correcting in ACR (default lens correction mode).
My pc crashed, upon reboot I'm unable to run PSCS6 lens correction filter. The error reads "The end of data was reached while reading from a container". The crash occurred while using the lens correction filter, the pc locked up. When I rebooted everything worked fine except the lens correction filter.
View 1 Replies View RelatedI opened an existing psd file in Photoshop CS2.
It just consisted of a bottom layer and another layer with a fill.
I flattened the layers.
I then went to filter>distort>lens correction, because I wanted to introduce some lens distortion to the image - but the "lens correction" option was greyed out.
I tried doing this with another image and it was fine.
Lens correction, and therefore vingette does not apper in my distort filter drop down menu in cs5? can I put this in to this filter or is it somewhere else.
View 1 Replies View RelatedIs there a way to make Adaptive wide angle filter NOT applying default correction? I cannot seem to use the filter because upon loading it always "correct" my photo in a way that I don't want to no matter whant option I choose.
As you can see, the auto correct image is softer and not as pleasant. I just want to be able to adjust it to the way I want. It is even worst with Panorama.
I'm unable to find a profile for my Canon 5D Mark III within the PS CS6 lens correction filter. In fact, Canon isn't even available as a camera make option within the Search Criteria box, nor are any canon lenses. When I click the Search Online button, the prompt reads "No online profiles found".
I have no problem within Light room 4 (the Mark III and lenses are recognized)-- however, I'd really like to be able to use the new Adaptive Wide Angle Lens filter within CS6, which needs the camera's EXIF data to function correctly. I'm using a new i Mac OS X.7
Is there a filter for keystone correction or another product I could pre-process my clips though for keystone correction?
View 4 Replies View RelatedI used the Pinch filter function for barrel correction in GoPro video. Unfortunately it does not correct the whole pictures area: the corners remain untouched. Is there any real barrel correction (fish eye lens correction) filter available for Video Studio?
View 4 Replies View RelatedWhen I try to shutdown I see 'waiting for Stained Glass (100%)'.I can use other applications, it is just the CS6 freezing.
View 1 Replies View RelatedI haven't seen this question exactly but when I Click Filter > Liquify, no options appear. What am I doing wrong?
View 13 Replies View RelatedLightRoom and Camera Raw have profiles for Lens Correction and all the current available lens are in the list for the Canon 6D raw files. BUT the Filter/Lens Correction when in Photoshop CS6 only have 2 Tamron lens listed. Odd that there are lens profiles for the Canon 6D raw files in Lightroom and Camera RAW but not CS6 Filter/Lens Correction.
Camera RAW, LR and PS are up to date..... NOTE: I have a Canon 7D, G11 and 1D Mark II N and all their files work as expected. It's only RAW files created by the Canon 6D.
Is there a way to specify simplification of a line when doing the Boundary Command? I notice that if I zoom out further that some vertices are eliminated in curves. How I can guarantee that the boundary is exactly the same as the plines that I specify.
View 4 Replies View Relatedi got a Color checker last week (SpyderCeckr) and now i try very hard to put this color correction into PS Elements 10. I have already installed ACR 6.7. My problem is i can not choose any .xmp data in ACR. Is it possible to choose? Or is there a other way
View 2 Replies View RelatedI used to have Photoshop 7 and often used the RGB controls to make color corrections. Now I have Elements 8 and I miss having RGB controls. Is there a way in PSE 8 I can simply adjust R, G, and B individually like I've been used to?If not, what is the closest substitute in PSE 8?
View 1 Replies View RelatedIf I have 4 Scratch disks does photoshop use all scratch simultaneously or does it wait for the first scratch to fill up before it starts to use the next one ?
View 1 Replies View RelatedWhat does scratch disk full mean???
View 3 Replies View RelatedI just installed PSE 11 yesterday (Sat). I played with Organizer for a while, first. While there, I edited My preferences. One of the things I changed was the location of the scratch file. I set it to the root DIR on the D: HD, which has only a scant few Win files on it. This is a 1.5Tb HD with mostly free space. Now though when I select the editor, PSE tells me that either the file is locked or I don't have permission to access it.
When I investigated this on D: using Win Explorer, the file, apparently, doesn't exist. I tried going back to Organizer & editing preferences, but wasn't able to see an option for setting the scratch file. So now PSE Editor loads fine. How do I properly move the scratch file from the C: HD to the D: HD?
My system is Win 7 (64),This is a brand new PSE 11 installation, I haven't added anything to it,My C: drive has 60gb free and is a 120gb SSD.I have 8gb system RAM.
What is the best way to start to make a flyer?
View 16 Replies View RelatedI've been editing very large images with many layers recently, and I noticed disk performance issues - so I thought that by changing my preferences to set the scratch disk to the D drive, I might improve things (more available space, not competing with Windows disk usage, etc).
Now when I launch PE, it throws up an error: 'Could not open a scratch file because the file is locked. Use the properties command in the Windows Explorer to unlock the file' and refuses to open. However, it doesn't say what file it's trying to open, so I don't know how to fix it - and I can't get into PE to change the preference back to the C drive.
Unfortunately the preferences file isn't ASCII so I can't edit it manually. Added a half-hour later: By simply removing all the setup files I can get back into PE, but I'd still like to know what folder(s) and/or file(s) PE is trying to create on the D drive, so that I can see if there's any performance improvement.
When I try to open Elements it says the Scratch Disks are full. How do I correct this problem?
View 4 Replies View RelatedI purchased elements 11 last year to not only edit photo's but also to create my own greeting and announcement cards.I'm having trouble figuring out how to create a greeting from scratch. It seems as if I can only use Adobe's templates. Is there any way I can create my own?
View 2 Replies View RelatedInstalled Photoshop Elements 11 and get an error msg when I try to open "Unable to initialize Photoshop Elements because the sratch disks are full"
Running Dell/Windows 7...Have 1.8TB hard drive with 1.3TB free.
All my MACINTOSH versions of Photoshop - S5, Elements 10, Elements 11 - display the opening start screen, but ABORT THE LAUNCH of the EDITOR with the error message:
"Could not open scratch file because of disk error."
"Could not initialize Photoshop Elements because the preferences file was invalid (it has been deleted)"
I have cleaned up my external disks so that they all have at least 100GB of free space
How can I correct this so that I can recover the Preferences, re-establish the Scratch Disk, and launch the Photoshop Editor?
I have Photoshop Elements 10. It worked until I upgraded to Mountain Lion.Now when I try to open it, I get two error messages: 1: "Could not open a scratch file because the disk is not available." 2: "Could not initialize Photoshop Elements because the disk is not available."
View 5 Replies View RelatedJust intslled Elements 2.0 on my HP Pavillion running Win 7 (64-bit) and got "Could not initialize Photoshop Elements because the scratch disks are full". What gives, what this is referring to.
View 1 Replies View Related