I created a file for someone using the Photoshop CS6 software, and he has just now informed me that he uses Photoshop Elements 10. The only thing he will need to do with the file, at most, is add layers on top of it. How can I save the file through CS6 for him to open and use in Elements 10?
View 1 Replies
I have a friend that is having a hard time saving files as .eps in InDesign, Illistrator and PhotoShop when using a Mac. She is able to create the file and save it so she should have full ownership and read/write rights to the file. Yet when she opens the file, edits it and saves it again, she gets a pop-up stating "Cannot save the illustration. You do not have enough access privileges - ID 5000". The user is the owner of the file. How would she not have access privileges? When she saves the file as an .ai, pdf, or jpg, there is no problem. She also has no problem saving the file on a Windows PC.
Software version : CS6
Device: iMac, 3.75 Ghz Intel Core Duo with 8 gigs RAM
OS: OS X 10.8 with all of the latest updates
I created a file for someone using the Photoshop CS6 software, and he has just now informed me that he uses Photoshop Elements 10. The only thing he will need to do with the file, at most, is add layers on top of it. How can I save the file through CS6 for him to open and use in Elements 10?
View 1 Replies View RelatedThis is worse than trying to deal with the government bureaucrats....I am simply asking how I can print out a complete pdf file of the user guide for PSE 10...I had one for version 9 but cannot get anything for version 10? The address shown in the getting started manual doe snot go through?
View 12 Replies View RelatedI understand how each time you save a JPG file, there is a loss of information (assuming you closed between Saves) even if you Save with Quality=12. However can you do the following to avoid losing information between saves?
- save as both a JPG and a PSD
- if you want to make another change, open the PSD (instead of the JPG) and make the desired mods
- save as both a JPG and a PSD again
I believe the resulting JPG has basically been updated only once, as opposed to twice if you had made the second set of mods by opening the JPG from the first set of mods. You could continue to do this as many times as you wanted, and the last JPG created would technically have only been updated once (always from the latest PSD), thereby avoiding loss of information from multiple saves.
Why do I not have the option to save a PSD file as a JPEG?
View 3 Replies View RelatedI have downloaded PE 12 & for some reason its Editor is not saving any changes I made despite ticking all relevant save boxes. It behaves very strangely - it does save 1 photo & then it stops saving . I was thinking it might be an interference with a previous PE11 versio - so I have deleted it from my PC - but it did not work. As a result it is useless for me - as I can process photos in my editor but as it does not save any changes
View 1 Replies View RelatedHow do I save a PDF file in PSE to be a small file? I start with a 700kb file, amend it, save it as a PDF (small) file and then it's over 7000kb?
View 5 Replies View RelatedI've encountered a problem when using layers to add a watermark. After adding the watermark I'm finding the photograph becomes distorted.
View 17 Replies View RelatedSince a day or two my PSE 8 crashes when i want to save or open a file.It just closes without a crash reporter.
View 17 Replies View RelatedAfter updating the file title in a jpeg file, does PSE save the title by recompressing the file using the jpeg compression algorithm or does it simply update the file title without recompressing the file? Prgressive saves of unaltered files suggest that PSE is recompressing the file each time it is saved.
View 9 Replies View RelatedIn Adobe Camera Raw, is there a way to select the file type that you save your image in. It seems .dng or DMG are the only file types, I would like to save my original CR2 file and save a copy in JPEG for others to open.
View 8 Replies View RelatedWhat would be the best file format to use when saving an edited photo to a disc for the customer to view. JPEG?
View 5 Replies View RelatedBasically I open a jpg file for editing in photoshop elements and then use "save as" to save my edited project as a jpg with a new filename in a local picture folder.
My new file however shows as
File Type: File
It will not open! the file wants me to associate a program to open it with and If I select photoshop to open the file I get a warning dialogue "Cannot open 2.5 3 Core TQ Rubber Flex because it is the wrong type of file"
This is the version of photoshop and my system info
Adobe Photoshop Elements Language Version: 10.0.0 (10.0 (20110831.m.17215))
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
Here is an example of one of these image files as seen on my pc.
Once I have tagged and/or rated a picture in Elements 10, I would like for the information to also be saved to the original file - is there a way to do this?
View 3 Replies View RelatedI have one user (user 1) who will work on a drawing and while they have it open, another user (user 2) opens the same file and they are prompted it is in use and they can open a read-only copy. Once user 2 opens the read-only copy, user 1 can no longer save their drawing until user 1 closes the read-only copy.
User 1 gets the following error when trying to save:
"Unable to save to drawing X:folderpathfilename.dwg as it is being accessed by another session. Drawing saved to X:folderpathfilename.tmp"
This does not happen everytime either.
I have started editing photos using the Photo Fix Options in Instant Fix. I have then switched to Photo Editor to fine tune my edited picture. When I use save or save as, to save the edited picture both the edited and original appear in the files. If I start in in Photo Editor and save there is an option to uncheck that reads "Save in version set with Original" However I am more comfortable with beginning in Instant Fix and then switching to photo editor. For some reason when I go to save after switching from Instant fix to Photo editor the uncheck feature is no longer available. step by step instructions to save revised photo afterusing Instant Fix first then Photo Editor.
View 3 Replies View RelatedAutoCAD LT 2012
I had my automatic save set up for every 10 minutes but files were not being saved regularly. I deleted files from the Temp folder thinking it was full and now there are no .sv$ saving at all. How can I make drawings save automatically every 10 minutes?
two of my colleauges opened a photoshop file at the same time and both could make changes. Saving the file kills one person's changes, which actually shouldn't be possible. How can this be avoided?
View 4 Replies View RelatedHow can I get a "user guide" for Elements 8?
View 6 Replies View RelatedLoaded Photoshop Elements 9 on a computer that is not on the internet and works fine as long as the user logging into the computer has admin privileges but a user who does not have admin priviledges gets an Error:6 that says to uninstall and reinstall the product. Uninstalling and reinstalling the product has no effect. I believe this to be that the normal user doesn't have permissions to a file somewhere that it needs to write to but can't seem to locate that file as I have given write permissions to Adobe under Programs & Common Files but no success.
View 10 Replies View RelatedHow can the user interface text size be adjusted in photoshop elements 12? I have found plenty of people also asking how to make this adjustment but I have found no way to fix it.
View 2 Replies View RelatedPSE 11 is out and i have downloaded the trial.
Is there the option to change the UI font in PSE 11 - i can not find an option, despite this UI problem being around for at least PSE 10 and PSE 9......
If no UI option in PSE11 - WHY?
I was wondering whether there is any way to choose the color of the user interface. By this I mean the toolbar, layers panel, etc. NOT the background, I've already figured out how to do that. Right now the toolbar/layers panel is this light grey color, and I'd like to change it so that the entire screen is a dark grey color, just as it is in CS6.
View 1 Replies View RelatedRecently, when I try to open Photoshop elements 9, I am asked to allow PSElements 9 adobe systems inc. to make administrative changes to my computer. I have had Elements 9 on this computer for 2 years without being asked for this permission. If I click yes, photoshop opens, if I click no, it doesn't open so I then have to click yes!
View 5 Replies View RelatedBackground info:
We got several image files every 2 weeks which should be edited and mainly reduced in size for web purpose. This work needs 1 work day for one man/woman to do, because he/she has to open the file save for web and then set the quality to a value were the file is nearly about 150-200 KB in size.
The images are different, some have few colors, some have a lot of colors and there are also different in resolution. But they should not be reduced in resolution, only in quality. All other specs of the image should be kept
Is there any possible script, plug-in or similar which can do the same (Saving with a specific max. file size) in some automatic and faster way?
I had to re install Adobe Photoshop CS3 Extend but now every time I try to start it, it errors out withe the following:
"Could not load the user measurement data point presets file because the file name was not valid."
and "Could not load the user measurement scale presets file because the file name was not valid."
Using Photoshop CS5 -- I saved a Photoshop file I created as a .pdf file but some of the areas on the .pdf file (specifically, sections of text) do not have any of the color/fill information, they are just white (blank areas). I've seen this before when converting other Photoshop files and could not find a work around. I tried saving with various compression levels (max, high, med) and it makes no difference.
View 12 Replies View RelatedAfter getting Vault installed on our server and successfully setting up users and connections, I used the Library Transfer Guide to move our Content Center (including custom) to the Vault. I then changed the Inventor Application Options -> Content Center -> Access Options to Autodesk Vault Server.
This seems to have worked, as I can Place from Content Center when in an assembly, and it is pulling standard content as well as our custom files properly from the vault. However, in the instructions that I used for the installlation, it was suggested to stick with a standard folder structure within the Vault, namely two Library Folders named 'Content Center Files' and 'Libraries' and also a regular folder named 'Designs'.
I created those folders prior to transferring the library, as I thought they would be populated with the standard/custom content. This was not the case and I am curious when these folders come into play? *they are empty*
Also, today I will be attempting to 'Check In' a project to the Vault that I recently completed; does this usually maintain structural relationships between files?
Would you recommend using a single project structure in vault for two people? It seems, since we won't be working on the same project at the same time, having a single project would not be relavant to our situation..
Inventor 2011 / Windows 7 Pro SP1 64bit
Dell Precision T3600
Intel Xeon E5-1607 @ 3.00GHz
AMD FirePro V4900
20 GB Ram
Why on ocassion Inventor tells me that the file I am working on is checked out by another user and that I cant save the changes. I find this a bit bizzare as I am the only person in the office using inventor although it is installed in other machines.I realise that all I have to do is steal the checkout, but I would really like to understand why it does this.
View 9 Replies View RelatedIf a drawing is opened by another user, I want to retrieve the name of that user. I presume that is in the dwl locking file. I I can't find any info on this topic. How do I read/extract the user name from a dwl file with .NET/c#?
View 2 Replies View Related
