Photoshop Elements :: Saving As Both JPG And PSD File?
Feb 17, 2013
I understand how each time you save a JPG file, there is a loss of information (assuming you closed between Saves) even if you Save with Quality=12. However can you do the following to avoid losing information between saves?
- save as both a JPG and a PSD
- if you want to make another change, open the PSD (instead of the JPG) and make the desired mods
- save as both a JPG and a PSD again
I believe the resulting JPG has basically been updated only once, as opposed to twice if you had made the second set of mods by opening the JPG from the first set of mods. You could continue to do this as many times as you wanted, and the last JPG created would technically have only been updated once (always from the latest PSD), thereby avoiding loss of information from multiple saves.
View 3 Replies
ADVERTISEMENT
Jul 23, 2013
Why do I not have the option to save a PSD file as a JPEG?
View 3 Replies
View Related
Feb 27, 2014
I have downloaded PE 12 & for some reason its Editor is not saving any changes I made despite ticking all relevant save boxes. It behaves very strangely - it does save 1 photo & then it stops saving . I was thinking it might be an interference with a previous PE11 versio - so I have deleted it from my PC - but it did not work. As a result it is useless for me - as I can process photos in my editor but as it does not save any changes
View 1 Replies
View Related
Mar 5, 2014
How do I save a PDF file in PSE to be a small file? I start with a 700kb file, amend it, save it as a PDF (small) file and then it's over 7000kb?
View 5 Replies
View Related
Sep 3, 2013
I created a file for someone using the Photoshop CS6 software, and he has just now informed me that he uses Photoshop Elements 10. The only thing he will need to do with the file, at most, is add layers on top of it. How can I save the file through CS6 for him to open and use in Elements 10?
View 1 Replies
View Related
May 24, 2013
I've encountered a problem when using layers to add a watermark. After adding the watermark I'm finding the photograph becomes distorted.
View 17 Replies
View Related
Oct 6, 2010
Since a day or two my PSE 8 crashes when i want to save or open a file.It just closes without a crash reporter.
View 17 Replies
View Related
Feb 25, 2013
After updating the file title in a jpeg file, does PSE save the title by recompressing the file using the jpeg compression algorithm or does it simply update the file title without recompressing the file? Prgressive saves of unaltered files suggest that PSE is recompressing the file each time it is saved.
View 9 Replies
View Related
Feb 17, 2014
In Adobe Camera Raw, is there a way to select the file type that you save your image in. It seems .dng or DMG are the only file types, I would like to save my original CR2 file and save a copy in JPEG for others to open.
View 8 Replies
View Related
May 13, 2013
What would be the best file format to use when saving an edited photo to a disc for the customer to view. JPEG?
View 5 Replies
View Related
Oct 4, 2013
Basically I open a jpg file for editing in photoshop elements and then use "save as" to save my edited project as a jpg with a new filename in a local picture folder.
My new file however shows as
File Type: File
It will not open! the file wants me to associate a program to open it with and If I select photoshop to open the file I get a warning dialogue "Cannot open 2.5 3 Core TQ Rubber Flex because it is the wrong type of file"
This is the version of photoshop and my system info
Adobe Photoshop Elements Language Version: 10.0.0 (10.0 (20110831.m.17215))
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
Here is an example of one of these image files as seen on my pc.
View 2 Replies
View Related
Sep 2, 2012
Once I have tagged and/or rated a picture in Elements 10, I would like for the information to also be saved to the original file - is there a way to do this?
View 3 Replies
View Related
Oct 16, 2012
I have started editing photos using the Photo Fix Options in Instant Fix. I have then switched to Photo Editor to fine tune my edited picture. When I use save or save as, to save the edited picture both the edited and original appear in the files. If I start in in Photo Editor and save there is an option to uncheck that reads "Save in version set with Original" However I am more comfortable with beginning in Instant Fix and then switching to photo editor. For some reason when I go to save after switching from Instant fix to Photo editor the uncheck feature is no longer available. step by step instructions to save revised photo afterusing Instant Fix first then Photo Editor.
View 3 Replies
View Related
May 7, 2013
AutoCAD LT 2012
I had my automatic save set up for every 10 minutes but files were not being saved regularly. I deleted files from the Temp folder thinking it was full and now there are no .sv$ saving at all. How can I make drawings save automatically every 10 minutes?
View 6 Replies
View Related
Oct 18, 2013
Background info:
We got several image files every 2 weeks which should be edited and mainly reduced in size for web purpose. This work needs 1 work day for one man/woman to do, because he/she has to open the file save for web and then set the quality to a value were the file is nearly about 150-200 KB in size.
The images are different, some have few colors, some have a lot of colors and there are also different in resolution. But they should not be reduced in resolution, only in quality. All other specs of the image should be kept
Is there any possible script, plug-in or similar which can do the same (Saving with a specific max. file size) in some automatic and faster way?
View 2 Replies
View Related
Oct 22, 2013
Using Photoshop CS5 -- I saved a Photoshop file I created as a .pdf file but some of the areas on the .pdf file (specifically, sections of text) do not have any of the color/fill information, they are just white (blank areas). I've seen this before when converting other Photoshop files and could not find a work around. I tried saving with various compression levels (max, high, med) and it makes no difference.
View 12 Replies
View Related
Dec 6, 2011
Is there a way to automate repetitive actions such as file size and file saving to the same folder?
View 4 Replies
View Related
Jun 18, 2013
am having an Issue with CS6 when saving files. When saving a file using the 'Save' option (not 'Save As') the file is not staying at the size of the artboard as it should, it is however being aurtomatically cropped down to the actual artwork size. This is causing issues with the Process we work with as we need the file to stay at the artboard size.If I click 'Save As' and change the Adobe PDF Preset to 'Press Quality' then this works, however this means that every file we save(which is quite alot in a day) means we have to go through the 'Save As' option and manually change each save.why this has suddenly started to happen with our Illustrators and do you know how to fix this so that it stays at the Artboard size when 'Save' is used?
View 17 Replies
View Related
Dec 5, 2012
Open an .AI file saved on a netapp or windows shared directory with full permissions (prior to saving I noted that all security groups are intact in file properties as we have 2 for read and write access)Make any changesTry to save and get the prompt: Can’t save preview, but all other information was saved successfully. The file couldn’t be found. ID = -43 (file is now corrupted and looking in security group file properties the 2 security groups designated for read and write access for the directory is now gone and shows an unknown security group????)
Save as works without a problem. Try to press save again and get This file has been modified outside Illustrator. Do you want to continue?Continue and prompted This file cannot be foundObviously the file preview icon goes from a thumbnail of the file to a generic iconWhen I try to open the file I get: Can’t open the illustration. The file is locked or in use.It led me to believe the issue was either OS X or CS5.5. I was able to open the file fine on Windows Illustrator CS5.5 make a slight change and resaved (which fixed the file and opens again in OS X and read/write security groups show up again?)Optionally, I was also able to fix the file to where I could open it in OS X by simply giving myself Read/Write access to the file from Get Info
Notes:No issues with the same file in 10.7.x.
I've tested on all available Mac Pro / MacBook Pro machines and issue doesn't seem to happen on MacBook Pro retina?Photoshop and InDesign not affected
View 1 Replies
View Related
Dec 6, 2012
I'm linking an excel file to an .ipt file with iLogic code determining if the Material type is a certian value it will find the correct material thickness. These file work great when working on them thru Vault but when I "Save As Template" and create this file where our other template files are located (not Vault) this fuction does not work. I have realized that I had to place the a copy of the excel file in the same file folder as the template ipt, but even this does not fix the issue.
I recieve this error:
Error in rule: Material, in document: Part6
'MWW Materials (Inventor).xlsx' could not be found. Check the spelling of the file name, and verify that the file location is correct.
If you are trying to open the file from your list of most recently used files, make sure that the file has not been renamed, moved, or deleted.
It seems completly countintutive that just saving the file as a template file would cause this not to work when all files that are required are located in the same file folder. Maybe I need a reference to the excel document within the iLogic code.
View 3 Replies
View Related
May 24, 2012
When I bring up n image file from a folder and after I work on it I would like to save in another folder other than from the original download file which is the only choice I seem to get.
Is there way to designate a "default" folder for saving other than having to continually search for the folder I wish to save to?
View 6 Replies
View Related
Feb 28, 2012
I saved a symbols file with a few symbols in it.
I then create new .ai files - create some graphics then want to save some of them in the symbols file.
I dont see a way of saving symbols from the .ai file into the already existing symbols file.
View 9 Replies
View Related
Feb 2, 2013
Im working in a graphic design class that uses cs5.5 and I just bought cs6. How to save a Photoshop file down to cs5.5 format so my teachers can grade it.
View 1 Replies
View Related
Oct 20, 2012
I just noticed that CS6 Help file is available for downloading as a PDF file. So I did that, but there seems to be no way to save the file. File > Save doesn't do anything, surely I don't have to download the 20Mb file each time I want to use it.
View 9 Replies
View Related
Jun 15, 2012
Upgraded from CS4: If I open a previously worked tiff file in CS6, and make some changes, instead of being able to click Control-S as before, and have it just save, now it comes up as save as, and I have to click 3 time,s as it asks if I want to overwrite it and have the same compression. And if I just modify and press alt-control-W - which would ask if I wanted to save and if I chose yes, it would just save it, now it would default to save a tiff as a psd instead.
Also if I have a group of images open, that I may or may not modify, and use the alt-ctrl-W to close all when done, with CS4 it would stop on the unmodified image and ask if I want to save it. Now if there are unmodified ones, it asks this, but it doesn't stop to show that image, remaining instead on a different image, so I must look at the file name, which for me is usually just a number and name, that I do not have memorized for each similar image. This is all such a step down in efficiency. Is there some preference to go back to the more sensible way?
View 3 Replies
View Related
May 11, 2008
I am unable to save or "save as" any file to a cd while in PHotoshop CS3. I get the error message "Program error" I can save the file to the desktop or pictures program, then can save it to a cd. Adobe personnel said it is a windows error. Has anyone had this problem. How was it resolved?
View 4 Replies
View Related
May 14, 2006
Installed Photoshop on my new Dell. Can't save files in BMP format.
View 8 Replies
View Related
Jul 15, 2008
I'm using Adobe CS3 suite, Mac OS X. I need to know how I can transfer or save as a psd file to jpg.
View 3 Replies
View Related
Jul 25, 2006
How do I save an eps file in Photoshop.
I can't seem to save it so that it is able to be opened in any resolution.
View 5 Replies
View Related
Mar 25, 2013
Today I can't seem to save my image as a GIF file. I used the Magic Extractor which saved my photo as a PSD but now PSD and PDF are the only options in the Save As window.
View 1 Replies
View Related
Oct 21, 2012
I have trouble saving changes I make to photos in Elements 9. When I try to Save or Save As, it says the photo is 'editing in progress,' even though I am finished with the changes. How do I save the changes?
View 1 Replies
View Related
