I am having trouble with uninstalling and reinstalling Adobe Photoshop Elements 11 on my computer. Everytime, I try to I get a pop-up: "2343 Error: A specified path empty." I tried running Microsoft Fix-It Tool but it's unavaliable for me to use. (I'm guessing Windows 8 is incompatible at the moment
View 1 Repliesi have adobe premiere Elements which has loaded fine But Adobe Photoshop Elements 11 will not load i get 2343 specified path
View 1 Replies View RelatedHaving tried to install PSE12 for several times without success ( problem to establish connection with other tools), I got now an error message "specified path empty" generated by the deinstallation process. It's strange that the deinstallation process is launched because the installation always failed so far (I can't find any trace of the installation in Windows 7). Please note that I've also launched the Adobe Support tool which confirmed that everything is ok concerning the PSE12 installation prerequisits.
View 1 Replies View RelatedI've got CS3 and working on a document. I'm typing in text but nothing is coming up on my document. The cursor is not flashing but the text I've written is shown as a layer.
I tried selecting Free Transform and I'm getting the message:
"Could not transform because the initial bounding rectangle is empty"
I am setting a mailer for a customer. Im using datamerge to to populate the addresses. I keep getting the one or more empty field names error when I try to bring in the list and I am not sure why. Here is a screen shot of the list All the information seems to have headings like it should so I dont know what the problem is. I now some of the field dont have date but it needs to be that way because some of the entrys do. I am Indesign CS6 on a MAC.
View 1 Replies View RelatedWhen a user closes ACA 2012 (sp2)he gets an empty crash message.
We are running win7 64bit.
I'm trying to breath life into an old Sheet Metal template.It starts with the Non-Empty VBA warning.From there, "Run-time error '13': type mismatch
Debugging, here's my screen (attached). I don't know enough about VB to know where there's a problem.
I used photoshop element 9.. I was just finishing my flyer for a client. When I went to click save and was waiting for the save to complete, the photoshop just disappear and when I open it back up PSE9 and went to look for my file, I was working on it say This is not a vaild Portable Document File??? I dont want to start over from scratch Is there any way to recover the file?
View 3 Replies View RelatedI bought photoshop elements 11 and I backed it up on a disk when I got rid of my old computer. But the disk seems to be empty. I made a mistake somewhere. Can I download Photoshop elements 11 ? Now there seems to be only elements 12.
View 2 Replies View RelatedWhen I try to create a new, empty catalog in Elements 9, I get this error message. "The catalog could not be opened. It is either corrupt, or the version is out of date and cannot be updated."
View 2 Replies View RelatedPSE 11 catalog but when I try to restore it it says it's empty. I can open the folder/files on my hard drive but the restore function says it is empty.
View 1 Replies View RelatedPSE 10 No formats appear in the themes column.
View 7 Replies View RelatedWhen I try to use the Process Multiple Files feature, it is giving me a message saying that the process was stopped or cancelled. Press continue or stop. When I click continue, it say that the folder is empty. It is not empty. This is what I use all the time to put my watermark on my photos.
View 4 Replies View RelatedWhen I try to use smart brushes in pse11 the presets are empty nothing in the picker. Don't know how to get them
View 3 Replies View RelatedI'm a web developer currently slicing an illustrator file for web graphics. Some of the icons and images have shadows, lights, etc, and it's impossible to simply see by a naked eye which pixels contains some shade or nearly transparent color and which doesn't.
It would be extremely useful if I could somehow easily differentiate between empty and non-empty pixels, so I wouldn't miss any when slicing.
Photoshop CS2 v9.0.2 Windows XP SP2
Received the following error message in CS2: "Could not complete your request because of a problem parsing the path data"
I began getting the message above after adding ITPC data to three .jpg files. The message appears when I try to open the files from either Bridge or Windows Explorer. Other files are not affected. The .psd master file with the same metadata opens ok. I tried clearing the ITPC data, but this had no affect. I also tried moving the file to a different folder and renamed the file with no success. The files open ok in Windows Paint and appear ok in Bridge.
I created the ITPC data on one file in Photoshop and saved a metadata template. Then, in Bridge 1.0.4.6 I used the "replace metadata" command on the other two files.
I searched the knowledge base and this forum. I found only one hit in the forum from 2007, but there were no responses.
Can anyone describe what triggers this message, and how to avoid it or fix it?
I get this message when I start PS. " There is no disk in the drive. insert a disk into the drivedriveharddiskdr2"...When I accept this message PS continues to load as normal, However
If I try to save a file using "Save for Web and Devices" I get the same message as above but when I accept this message I get another message "The operation could not be completed. The System cannot find the path specified."All other functions of PS appear to work normally.
I have a Quad 4 processor with 8gb Ram with Windows 7
I'm running into a bit of a problem with having a shape extruded in 3D.
If I draw a rectangle shape set to path over an image and then choose "source - work path" and "3D extrusion" I will get a 3D rectangle with the image on the front side.
If I draw a 3 sided polygon (triangle) set to path over an image and then choose "source - work path" and "3D extrusion" I will get a error telling me that the path is too complex.
I'm doing the exact same thing. Now, if I have 4 sides plus, on the polygon it will extrude just fine.
Something seems to be happening with 3 sided polygons. This holds true with the pen tool as well. Three points will give you the error, 4 and above seem not to.
CS6 - latest build
Mac 12 core
24gigs Ram
Cloud subscriber
In Elements 9 I now get an error message "Cannot use Clone Stamp due to program error".
View 1 Replies View RelatedWhen I tried to install the photosohop CS5, the below errors keep prompting out.
Exit Code: 7
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 70 error(s), 58 warning(s)
ERROR: DS011: Payload path does not exist and no media record specified.
ERROR: DS011: Payload path does not exist and no media record specified.
ERROR: DS011: Payload path does not exist and no media record specified.
ERROR: DS011: Payload path does not exist and no media record specified.
[Code].....
How do I transfer the entire organizer of Elements 9 to the empty organizer in Elements 12? By the way, Elements 9 is so defective, it will not even let me back up my organizer in 9. The 9 organizer would let me select a photo, bring it into the editor, print it and then it would crash... then I had to start all over again... the darn thing crashes as it was prone to problems that adobe ignored. Is it better to just re-load all the photos from a fresh folder that is on my desktop? There are 5,000 !
View 1 Replies View Relatednot sure why I'm having trouble using the blue "path" layers polyline path to loft the profiles and form the c-clamp.
View 2 Replies View RelatedI am trying to recreate and 3D model the impeller of a heartmate II LVAD (URL....) but I am having problems with the sweep along the helical path. The profile is the vertical line and the path is the helix. I want to use a surface output for now. I had to use Solidworks to generate a variable pitch helix and import into Inventor.
View 2 Replies View RelatedI have problem when I try import imagen inside Edge stage. Then I need close the file and re-open to fix the image paths.
I note that Edge create a image folder to save the image inside the Library.
Do I am doing anything wrong trying drag/drop image inside the stage?
I like to have the path display in the title bar at the top of the screen. I check the box to display it in options. It works! But the text is almost illegible in the title bar. The title bar is black, the text is black with some cloudy grey background. It is impossible to read. I can't seem to find anyplace to change it's appearance either.
View 4 Replies View RelatedI have created a bin/vat/tub using sheet metal. I started with a contour flange. I then copied the sketch and pasted into a new sketch off the flange for a contour roll feature. Then a flange, roll, flange, roll, flange and roll. My trouble starts at the last flange. I'm trying to construct the flange exactly as I have created the features before. I set the distance, select the profile (it shows the flange on the screen), hit apply and that's when my message shows up. "Non-tangent curves found in path: flat pattern cannot be correctly created. Edit sketch and add constraints to the curves. The sketch is fully constrained according to the lower right hand corner and the auto constrain button.
View 2 Replies View RelatedWindows XP/Sp3 - Gimp 2.6.10 - Gap 2.6
I readily admit that I have another thread open where I mention this issue. However, that thread mainly addresses another issue. The problem that I address, here, is holding up progress on the other and I believe it to be unique enough to warrant an independent thread.Here's what is going on:
-I am attempting to have text travel along a path.
-I am using the proper procedure to save the background frame as _000001. and duplicating way more frames than I am using path points.
-I am using the proper procedure to create my text letters in a separate source image.xcf file.
-My RGB settings match up.
-I am activating the background layer in _00001.
-I am using the proper move path procedures and operator settings.
-My From and To frame assignments are less than the number of frames.
-Whenever I Refresh, or OK, the move path function, I get a Move Path Message stating the selected path points are different than the number of frames and I either need to adjust the number of path points I am using, or change the number of frames.
I have spent hours researching this. The only two issues I see mentioned are to make sure that the RGB's match up and that I am using the background layer of the _00001 file.I see that there was a patch for this condition on early versions of Gimp/Gap. I wonder if it could be reoccurring.
I'm currently getting the "1324 Error. The folder path 'My Documents' contains an invalid character."
when trying to run AutoCad 2010. It had been working fine previously, but now it gives this error and won't allow me to use it. I am also unable to uninstall or reinstall the program without getting the same error.
I have confirmed that the profile is not set to roaming. I have also tried deleting the registry entries as recomended here:
[URL]
The user account is local administrator. The OS is Windows 7 64bit.
How. Do I change to a new folder, keeping my sub folders the same so that I can still upload. I am changing the user "my pictures" is under?
View 2 Replies View RelatedElements 10 and am trying to trace the outline of an existing image. The tutorial I'm watching refers to the Path Panel, but it does not appear as an option under Window. Nor do I have an "Other" option under Window. Did I miss installing something?
View 7 Replies View RelatedI have all of my photos on an external hard drive that I am currently accessing through a router. I would now like to access the external hard drive directly from my laptop (thereby changing the path). How do I do this while still retaining all of the tags and places I have stored?
View 1 Replies View Related