Received the following error message in CS2: "Could not complete your request because of a problem parsing the path data"
I began getting the message above after adding ITPC data to three .jpg files. The message appears when I try to open the files from either Bridge or Windows Explorer. Other files are not affected. The .psd master file with the same metadata opens ok. I tried clearing the ITPC data, but this had no affect. I also tried moving the file to a different folder and renamed the file with no success. The files open ok in Windows Paint and appear ok in Bridge.
I created the ITPC data on one file in Photoshop and saved a metadata template. Then, in Bridge 1.0.4.6 I used the "replace metadata" command on the other two files.
I searched the knowledge base and this forum. I found only one hit in the forum from 2007, but there were no responses.
Can anyone describe what triggers this message, and how to avoid it or fix it?
When I try to open a tif, I get a message that states: Could not open"C:Documents and Settingsuser2desktop65-AV165-AV1.tif" because of a problem parsing the TIFF file.
Can someone please help explain how I can open this tif?
I'm having issues opening JPEG files with a large pixel size. I'm using Photoshop CS3 Extended under Windows XP Professional Service Pack 3, I have 4GB RAM (So just over 3GB effective in XP) and an AMD Athlon 6x X2 4200 Dual-CPU. My page file is set to 8GB! Photoshop is set to use up to 80% of my RAM
The issue relates to all large images I try to open, but the example I am going to use as an example regards a stitched panorama with pixel dimensions of 38,156 x 2,207. I know that is huge for most people.
When trying to open the image in Photoshop i get the following message:
"Could not complete your request because of a problem parsing the JPEG data"
I think the issue relates to the size of the image, but it opens fine in windows picture and fax viewer, and also in Paintshop Pro X2 (Though in PSP X2 i can only modify the first 24,000 pixels accross before it refuses to do anything else)
Why can't photoshop open the images, i would reduce their size, but i need them for a room-sized display (Some 20 feet long) so i can't reduce the image size without losing quality when they are printed. On the other hand i can't print them until i correct some image/colour issues with photoshop.
I want to be able to repath a data shortcut I have on my drawing to a file thats on my C: drive, how do I do this? Its just for this one drawing I want to do it with, so the Data Shortcuts Editor is no good to me.
We use Sheet Set Manager fields to keep track of section cuts and details and such.Users are asking me if they can get only the last 4 digits of the sheet number to show up on the section cuts.
Is there a way to parse or truncate a field in the formula area of the field dialog box?I'm familiar with LISP and DIESEL but the file dialog box / formula area does not seem to accept those functions. Will it take a .NET function? If so, what? Or, is there another option I'm overlooking?
I have reinstalled my operating system twice, after complete format, and both times when I have tried to install Photoshop 7.0 I get an error message; "Component Move Data Error Info, Media name: Data, Component: App-Photoshop, File Group: App-PS, File: photoshop.exe, Error Number: -106 (refer to online help)" which prevents me from reinstalling Photoshop 7.0!
I tried installing on another computer in my house, and the installation was flawless. I am having no problems reinstalling my other programs. On the 2nd of the above re-installs, I did it in the safe mode after deleting all the *.tmp files (and others) as recommended in a forum with Photoshop 7.1 update.
I have requested technical support from Adobe using their online system. I'm supposed to receive a response within 24 hours. I've used this system once before for Adobe Premiere Pro, and got good results, so hope I will again.
How do you move a survey database and data shortcuts? Without going into details, sometimes it is necessary to copy portion of projects as new projects. The survey database along with the drawings our surface, points, linework, etc. need to reference the new directory. I can set the survey database folder location to the new path but am not certain the information in the dwg is point to the correct location.
The same essentially applies to the data shortcuts. I'm having trouble getting this to work. With LD we were able to copy the project and resuscitate the drawing(s). I tried to use Data Shortcut Editor with the Saveas. I then attempted to rename the dwg's and path the new location and name but receive an error of Invalid source file. Correct the path or press Esc..
i have this drawing which i created data reference to the wrong project in the wrong coordinate system and worked off that. then now i am trying to correct it. so i copied the dtm and did coordinate transformation and got that right. now the model drawing is still linked to the original dtm from the other project folder.
if i remember right back in 2007 version there was a completely built in shortcut editor which allows you to change the path in current drawing. now it's all greyed out. there is no access. so is there a way to bypass this? probably pretty common thing to do. say you want to try different version of the same object to try your design just swap it back and forth.
They should make a right click button on the data shorts in current drawing and says "browse data reference" not show up when only broken reference occurs.
one way i can think off now is copy the files to local. disable network drive, then let it broken reference show up then browse to desktop one then delete desktop one and hopefully it get the broken reference again and not look for the very original one. i think it's probably gonna do that, there is some "hidden" thing stored in the object to point to the original path which not available to users.
Civil 3D 2012 Work: Xeon W3503, 12GB, Quadro 2000, Dell P2211H x 2 Home: 3930k, 12GB, GTX 590, U3011, QX2710
I get this message when I start PS. " There is no disk in the drive. insert a disk into the drivedriveharddiskdr2"...When I accept this message PS continues to load as normal, However
If I try to save a file using "Save for Web and Devices" I get the same message as above but when I accept this message I get another message "The operation could not be completed. The System cannot find the path specified."All other functions of PS appear to work normally.
I have a Quad 4 processor with 8gb Ram with Windows 7
I'm running into a bit of a problem with having a shape extruded in 3D.
If I draw a rectangle shape set to path over an image and then choose "source - work path" and "3D extrusion" I will get a 3D rectangle with the image on the front side.
If I draw a 3 sided polygon (triangle) set to path over an image and then choose "source - work path" and "3D extrusion" I will get a error telling me that the path is too complex.
I'm doing the exact same thing. Now, if I have 4 sides plus, on the polygon it will extrude just fine.
Something seems to be happening with 3 sided polygons. This holds true with the pen tool as well. Three points will give you the error, 4 and above seem not to.
I am having trouble with uninstalling and reinstalling Adobe Photoshop Elements 11 on my computer. Everytime, I try to I get a pop-up: "2343 Error: A specified path empty." I tried running Microsoft Fix-It Tool but it's unavaliable for me to use. (I'm guessing Windows 8 is incompatible at the moment
I need to update both the path and the Source file name in Data Shortcuts editor. If I update the path, it looks in the new path for the old file name, and throws an error. If I update the File name, it looks in the old path for the new file name, and throws the same error.
When I tried to install the photosohop CS5, the below errors keep prompting out.
Exit Code: 7 -------------------------------------- Summary -------------------------------------- - 0 fatal error(s), 70 error(s), 58 warning(s) ERROR: DS011: Payload path does not exist and no media record specified. ERROR: DS011: Payload path does not exist and no media record specified. ERROR: DS011: Payload path does not exist and no media record specified. ERROR: DS011: Payload path does not exist and no media record specified.
I'm trying to connect to a mysql database and I get this warning : "There was a problem accessing the connection's schema information. Item AREA is already in this named collection."
Yesterday AE CS4 crashed and told me to save the project. Unfortunately i overwrote my only existing file.Now i can't open it any more, i always get the error message displayed above. Anyway, im surprised by the fact that the file still has the same size as before, so there has to be the same data in the file, hasn't it?
I also tried the capslock method and the importing method, non of them worked.At the capslock method AE only imported one audio file, but not a single composition. How to restore it?
I am working on a scene in Maya 2011 as a Maya binary and can open the scene up in Maya 2012 as a binary without any problems. But, when I save the file in Maya 2012, I can no longer open it in Maya 2011.
I've read in the forums that I can save it as a Maya ASCII file and have better luck transferring between Maya versions but I cannot get Maya 2011 or 2012 to save the scene as a Maya ASCII file.
I get the following error: // Error: File contains unknown nodes or data. To preserve this information, the current file type cannot be changed.
I've tried "Ignore Version" on when opening and have deleted all all by type/non-deformer history but no luck.
I'm attempting to export out an animation clip and got the above error. A similar post years back and said it was a plugin issue. But nor sure which plugin I might have turned off.
By the way, Steps performed prior to"
Selected mesh and rig (contains IKFK nodes)> Generated character set "walk", ect Then while still selected, Edit>Keys> Baked Simulation Then from the graph editor and the character selected, File> Export Animation Clip....that's when I get the error.
I think I covered the steps correctly. Maybe I'm missing something?
You more experiance animators/riggers might be able to shed some light on this modeler.
We have just switched from 2010 to 2013, and are experiencing some problems on two different projects. The issue is that we have our pipe networks located within on drawing, then data shortcuted to our production drawings. However, the pipes are not drawing either in plan or profile to the correct size.
They read correct in the pipe size, the style is set to display the correct "parts" of the pipes, but they are incorrect. It is not consistent within regards to a single pipe size being incorrect, nor is it the same sizes between the two projects.
I am trying to recreate and 3D model the impeller of a heartmate II LVAD (URL....) but I am having problems with the sweep along the helical path. The profile is the vertical line and the path is the helix. I want to use a surface output for now. I had to use Solidworks to generate a variable pitch helix and import into Inventor.
2012 SP2. I get this very descriptive message while trying to create a point cloud: The following error occurred processing the point cloud data: An error ocurred in data processing.
I've previously created point clouds from the same data (ENZ comma delimited) without a problem. I believe this was done before applying SP2. Any problems creating point clouds since SP2?
We use Survey Data Collection Link to convert our file formats, in this case it is a GPS job exported from a TSC2 using Trimble Survey Controller Version 12.46. I exported the job from the data collector as a .csv file then use SDCL to convert the .csv into a .fbk file. I am getting this error saying the file is invalid or in use. We ran into this problem a couple months ago and it disappeared after a couple days, and now it has resurfaced.
Running Autocad Civil 3d 2012 with Service Pack 2, Windows 7 64-bit OS.
I have a major error currently affecting my work that I need to resolve ASAP. I'm using C3D 2012 64 bit with Windows 7. I have multiple model drawings that I have created pipe networks and view frame groups in, and using those model drawings I have created plan and profile sheets from the view frames. I created data shortcuts of all my pipe networks and referenced the pipe networks into my sheet drawings. In the sheet drawings I drew the network parts into the profiles, and everything displayed exactly as it was supposed to. No issues at all.
Now fast forward about a month. Out of the blue one day I open one of my sheet drawings to perform some edits and notice that the pipes that were previously displayed in the profile views showing inside and outside walls with the centerline turned off now show up as a simple line. I haven't changed any settings at all. I looked at the properties of the pipes, and they seem to have all ignored their asigned diameters- the pipe data in the referenced network now assumes all inverts & crowns are the same elevation as the centerline.
Long story short, I have gone so far as to completely reinstall the program and restart the drawings, but the more I edit the oringal network the worse the problem gets. Now all of my structures are attaching themselves to the surface profile instead of the pipes, and the entire network gets put onto my current layer rather than the layers I assign in the Create Pipe Network Reference dialog box.
It happens to any drawing I try to open on this network- even ones created by third parties that I haven't edited. And the problem resides in the drawing because anyone I send the drawings to has the same problem. It will even crash the entire program sometimes when they try to open my drawings.
Civil 3D 2012 SP3 - Windows 7 64 bit - Intel Core i3-2120 - 8 GB Memory
I like to have the path display in the title bar at the top of the screen. I check the box to display it in options. It works! But the text is almost illegible in the title bar. The title bar is black, the text is black with some cloudy grey background. It is impossible to read. I can't seem to find anyplace to change it's appearance either.
I have created a bin/vat/tub using sheet metal. I started with a contour flange. I then copied the sketch and pasted into a new sketch off the flange for a contour roll feature. Then a flange, roll, flange, roll, flange and roll. My trouble starts at the last flange. I'm trying to construct the flange exactly as I have created the features before. I set the distance, select the profile (it shows the flange on the screen), hit apply and that's when my message shows up. "Non-tangent curves found in path: flat pattern cannot be correctly created. Edit sketch and add constraints to the curves. The sketch is fully constrained according to the lower right hand corner and the auto constrain button.
Occasionally I get the following message when trying to add data shortcuts.
"The drawing has not been saved yet, please save the drawing before creating data shortcuts" Only I have saved, this still occurs after either a full or quick save.
Shutdown Civil and reopen still gives the same message..The problem seems to be when you are saving to any other version of Autocad than R2010. Save as R2010 and it works.Mike Evans
Civil3D 2013 / 2014 British UK Windows 7 Professional 64-bit Intel(R) Core(TM) i7-3820 CPU @ 3.60GHz (8 CPUs), ~4.0GHz With 32768MB RAM, AMD FirePro V4900, Dedicated Memory: 984 MB, Shared Memory: 814 MB
I recently installed Inventor Premium 2012 and I am not able to make a bolted connection or creat a tapped hole. I get this error message: Invalid thread data table. Please check Thread.xls file.".
