Photoshop :: Cutting Out Model From Infinity Screen

Feb 8, 2008

I've just done a photo-shoot with some models and my photographer wants to charge £10 per image for cutting the model out of the infinity screen. I'm decent with photoshop as i've used it for years and i could technically cut it out by magic wand and some manual cutting.

How does a pro go about quickly and nicely cutting a model out of an infinity screen?

View 2 Replies


ADVERTISEMENT

Photoshop :: Infinity Symbol?

Apr 24, 2003

how to make an infinity symbol? I seem to remember that there was some way to do it with text (other than flipping a number 8 on its side), but I forget it now.

View 6 Replies View Related

Revit :: Not Cutting Through Imported DWG 3D Model?

Mar 13, 2012

How I can successfully import a 3d .dwg model into Revit so I can cut through it in plan and section?  I built the model in sketchup, exported it as a .dwg, then impoorted this .dwg into a new Revit family.  I then loaded this family into the revit file I'm working in. Its cuts through the model on basement and ground floor plans but not on 2nd or attic.  For the 2nd or attic it just shows me the roof of my model. 

View 9 Replies View Related

AutoCAD LT :: Model Space Screen Darkens And Unable To See Screen?

Nov 10, 2011

Model Space Screen Darkens and am unable to see screen

View 2 Replies View Related

Maya Modeling :: Create Cross Sections Without Cutting Up The Model?

Oct 20, 2011

how to create cross sections without cutting up the model similar to applications like Autodesk Inventor? Maybe inserting a poly plane into the object and tell Maya to only render stuff in the normal direction of the plane if that is even possible?

[URL]

View 4 Replies View Related

AutoCAD Inventor :: Stretched 3D Solids Goes To Infinity

Feb 26, 2012

Any solid shape just tend to go to the right no matter what angle you look at it and as it seems to go towards towards infinity . This is in orthographic view I might add. In perspective view the cube ends within the screen but it far from cubical and changes its appearance as you rotate it. As you can see in the pictures even the axis graphics down to the left is messed up.

Picture one is while I am extruding the 10mm cube. The big orange thing is the arrow used to drag up from the sketch.

Picture two is just the 10mm cube. As you can see the wire frame works just fine and it event hides the edges behind the solid.

I just installed the software on this computer so I suspect it is my graphics card that simply cannot handle the 3D solids. It is a few years old, a NVIDIA Quadro FX 540. The shadows does not work either, probably because I do not have shader model 2.0 or newer. do I have to scrap my computer?

View 1 Replies View Related

GIMP :: Cutting Hole In Image Of TV Screen To Insert (layer Over) Image

Jul 25, 2012

I am making a video in Nero Vision 10 and need to cut out the screen of a tv so that I can layer the TV over an image/video so it looks as though it is on the screen. I enclose a screenshot of the project. 'Transform-tools-crop' only cuts in straight lines so I wonder which device I should use which can cut out an odd bespoke shape? You can see in the uploaded image from the project how the image currently cannot fill the frame without covering it.

View 7 Replies View Related

Photoshop Elements :: Blue Screen Freezes At Initializing Model Point

Mar 14, 2014

When I click on the PS 10 the organizer rectangle comes up, but, when I click it the blue screen freezes at the initializing model point and won't go to the list of albums. But, if I click on the Edit, instead, the blue screen goes to the full page with its fix tools. If I click on show items in the bin the whole list of usable albums comes up. I have run every fix and scan I can think of. Premier elements does the same, but, CS6 is fine.

View 3 Replies View Related

CorelDRAW Graphics Suite X5 :: Cutting All Components Of Image Using Cutting Master 2 Plugin

Aug 1, 2011

I have downloaded an eps file, which I need to cut. I use a graphtec ce5000-60 cutter, and a plugin called cutting master 2 in order to use coreldraw.

when i select application launcher and choose cut / plot, it opens cutting master. when i do this, it only shows the 2 outer lines of the logo i need to cut. I have attached a screenshot so you can see exactly what I mean. I have tried lots of things to recitfy this, but as a complete beginner with this software, I really dont have a clue. 

View 8 Replies View Related

AutoCAD 2010 :: Cutting Solid Into Two With Non-planar Cutting Plane

Aug 2, 2012

Is there a way to cut a solid into two pieces using a non-planar cutting plane?  I have been tasked with calculating the volume of concrete damage in a chute block.  I have a sketch of the damage on the chute block.  I created the chute block as a solid and then drew the damaged area extents using plines.  This created non-planar plines.  Is there a way to get this to work that will allow me to see the volume of the concrete damage?  I need an easy way to do this, there are 50 chute blocks all the same size but with varying degrees of damage

View 1 Replies View Related

AutoCad :: Dimensions On Print Not Aligned With Model / Object - All Is Well On Screen

Sep 5, 2012

Working in AutoCAD 2010. Recently I've started to notice that the dimensions on my print are not exactly aligned with the model/object. Only the dimensions seem to be shifted slightly in two directions (~1mm?). On screen, everything looks great.

Typically, I design 3d parts (model tab), then in the layout tab set up viewports (mview), and dimension in paper space...

Is there some paperspace offset I may have inadvertently invoked?

View 5 Replies View Related

AutoCad :: Plotting Drawing From Model View Screen So That Certain Line Scales Show

Aug 4, 2012

Is there anyway of plotting a cad drawing from the model view screen so that certain linescales show? At the moment when I plot it will show hatched items without the outlines.

View 9 Replies View Related

AutoCAD Civil 3D :: Label Style Text Size As Percent Of Screen (model Space)

Jun 17, 2013

I've been tinkering with text sizes in model space and would like to have my point numbers consistent regardless of zoom factor.  I can do this in paper space (viewports) as the annotative scale controls the appearance, but for doing analysis of points at various zooms in model space, it would be nice to be able to Regen and have them all come to a certain text size.

I've made some expressions that are modifications of those I use in paper space, but I can't seem to find a function/variable that I can reference for this purpose.

View 2 Replies View Related

AutoCAD Inventor :: 2013 Dual Screen - Jumping Browser From Right Screen To Middle Of Left Screen

Jun 3, 2013

I'm here with 2013 SP2 64 bit Build 200 and two screens. Left screen is graphics area, Browser is on the left of right screen. Graphics is ATI Fire Pro V7800 with driver 9.3.3.3000.

In video (zipped MP4) you see a cutout of both screens, think of screens changing at the left of the browser.

Now, in many cases, after doing an operation, the browser is jumping back to the middle of my graphics in the left screen.

View 4 Replies View Related

AutoCAD Inventor :: Browser Shows Everything But No Model Shows Up On Workspace Screen

Jul 20, 2012

It was working fine.  Then I just did a simple command (pattern a part) and the entire workspace blinked out.  The first time it happened I hit UNDO and it was back.  So I got out of the drawing and got back in and tried the pattern again. Same issue but this time when I hit UNDO it would not come back.  I closed the file without saving and when I went back in the file the workspace is still nothing but white screen.  In the browser everything is still visible except for those that I had already changed to invisible.  I tried making an invisible to visible and nothing happened.  I got out and tried opening the "old version" which should've been before any of this happened and it is also blank.  I can go to an ipt or iam in the browser and hit open and it will open in another screen just fine.  I just can't see my main assembly.  I have Inventor 2012.  It shows no errors or messages.  I have even rebooted.  

I looked thru the forum and found a past issue back in 2005 identical.  I tried doing Find in Window on an item in the browser but for some reason that option is not even in the list when I right click.

View 6 Replies View Related

Photoshop :: 5.5 Extended 3DS Model - How To Place Correctly Sized Graphics On Model

Oct 23, 2012

I've created a 3D product model in an application that does not have any text capabilities (Autodesk Inventor Fusion 2013). I'm trying to get that model into AfterEffects (AE) via the Photoshop live object technique.
 
But before I open it in AfterEffects, in Photoshop CS 5.5 Extended, I'm trying to add the product text graphics to the "Diffuse" layer of the model so, when animated in AE, all the text moves with the appropriate perspective, etc.
 
For the life of me I can't figure out how to format the text to fit the model.
 
Fusion saves files natively to .DWG format, but they appear non-standard and without some key data.
 
I was able save the file as a "STEP" file .stp, then translate to .3DS format. That file results in a model that opens just fine in Photoshop and when saved in .psd format, and opened in AE as a Photoshop Live object, works fine. I can't image getting the text on the surface in AE would be easier/better than Photoshop.
 
Each time I double click on Layer 1's Diffuse (texture) sub-layer (is that the correct term?), I can put some text in the new window, but the scale is always way wrong, the orientaion is 90 degrees off (counter clockwise), and the text is clearly trying to wrap and repeat all around the model. I'm just trying to get a set of text (several pieces in different locations - company name, product name, some small additional text) on one side of the surface bound as if it were part of the model.

As an aside, I did try to add the 3D model, converted to a .DAE file, to presets > meshes as suggested in the help files, so I could treat it like one of the 3D object presets, and add the text that way.
 
No matter what I do I can't get the mesh to appear in the pre-set list. I don't see any way to "activate" the mesh other than place the file in .DAE format in that folder. Yes, I've exited and re-started Photoshop many times.

View 3 Replies View Related

Photoshop :: Share My Screen - Crash - Blue Screen...

Feb 10, 2009

I have used "Share My Screen" meeting feature a few times on my machine.

a client and it gave me the blue screen of death crash and forced a restart. After it did this 3 times I gave up.

Windows XP Home 2002 SP3
PhotoshopCS4 Extended
CS4 Production Premium
RADEON X300 SE 128MB Hypermemory
Intel Pentium (R) CPU 3.00 GHz 2.99 Ghz
2.50 GB RAM

View 3 Replies View Related

Photoshop :: Cutting Out

Apr 25, 2007

I made a design last night that included me cutting out a model from one of my photoshoots, so I did that... and then after all was said and done, I'm thinking she looks a little choppy and "dropped" into the photo. is there some way to make her look a little more smooth?

I got most of the edges cleaned up and used a feather, and even burned around the edges a tad to make it blend but it still looks very cut out.

View 3 Replies View Related

Photoshop :: Cutting Out Pictures

Aug 19, 2009

I use Photoshop 8.1I have to make 100 pictures of some car antenna cables. When I have those pictures, I need to cut them out.I think in english it is called crop. (I have dutch versionATM I am doing every picture manually as the are all different. IS there a macro or plugin that cuts out the pictures itself or even help out with it alot ?Getting a bit fedup with setting all the achor points and straighten the lines. 

View 8 Replies View Related

Photoshop :: Cutting Out A Shape

Jan 10, 2007

I have created a new document consisting of just 2 layers.

The bottom layer is transparent and the top layer is filled with red.

What I want to do is cut out a rectangle from the top layer revealing the transparent layer underneath.

View 2 Replies View Related

Photoshop :: Cutting Out An Image

Feb 2, 2004

I have read somewhere that i should use the regular lasso to cut images, but that is a a lot of work if i have an big image.

So i was thinking if someone have any tip or in another way , maybe someone wanna cut the image out for me i am a bit shaky on my hand when i use the lasso-tool so its hard to get it good even if i zoom, and besides that ,is the cut-job ,well its important,

but its a thing that i wanna get over as soon as possible so i can start being creative ill post the image i will work with (its only the shape i want) it will be bigger in reality but i had to take a smaller pic of it to get it posted :

View 9 Replies View Related

Photoshop :: Cutting Out A Fur Image

Nov 12, 2006

I raise chinchillas and would like to cut out some images and just change the background on others. Being that it is a fur animal (samples below) and it has all different lengths and curves....how would I do this? I'm new to photoshop other than playing with curves and stuff to make them nicer photography.

View 7 Replies View Related

Photoshop :: Cutting Around Images

Aug 7, 2003

I'm creating a games website and therefore need a lot of images. However, I was just wandering was there a good way of cutting? Should I just use the lasso tools?

View 2 Replies View Related

Photoshop :: Cutting Out An Area

Aug 26, 2005

I am trying to take out an area of a photo. I have it selected. I want that area deleted and replaced with something similar to it's surroundings.

I have a picture of a barn... there is a large white post that I don't want there. The post is surrounded by flowers. I'd like it to look like a big patch of flowers with no post.

View 2 Replies View Related

Photoshop :: Cutting Around A Person

Apr 27, 2008

quickly cut around people, objects are ok with the "refine edge tool" but people, particulary the hair is hard to do..

View 18 Replies View Related

Photoshop :: Cutting Out Shapes

Sep 16, 2007

Im trying to switch from Fireworks to Phosotshop. In FW you can draw two shapes and with both selected punch, unify, etc the two shapes. Could some one help me along on how to do the same thing in PS?

One more question. Is it possible to align a selected item to the stage rather than to another object? Fireworks can align objects center of the stage or left, right, top, etc.

View 2 Replies View Related

Photoshop :: Cutting Text

Jun 13, 2006

I am trying to make a logo in black and white where the letters of the text have the opposite color of the background.

there are three major elements in the logo
background (white)
KN (big letters in black)
kyushu and network (small letters that have to be in opposite color )

can anyone help me with this ?

View 9 Replies View Related

Photoshop :: Cutting Out A Picture Well

Apr 14, 2004

cutting out an image without using that tool where u have to cut out the picture in a squre form but i want to make it so i can cut out JUST the picture and I can add text behind the picture.

View 2 Replies View Related

Photoshop :: Advance Cutting

Sep 6, 2003

I have seen in a photoshop book or a tutorial how u can cut a picture not with the lasso or extract tool. I think they replaced the colors... not sure.

View 7 Replies View Related

Photoshop :: Cutting Up A Picture

Jan 27, 2003

I created a picture in Photoshop 10.5in X 4in now i would like to cut it into 6 picture all 3.5 X 2 (like a business card size) I was creating a fridge magnet for my Church. Each week we will hand out one piece of the picture and after 6 weeks they will have the full size of the picture to put on there fridge. So, how can I cut the picture into 6 pieces and when they are reassembled they will all fit. I use Photoshop 6.

View 5 Replies View Related

Photoshop :: Spritesheet Cutting

Aug 11, 2006

I have a sprite sheet, which is a single image composed of about 800 smaller images that are separated by transparency.

I need a simple way to cut each sprite out and save it as its own image (or put it in its own layer) without manually selecting and saving. Is there a way to do this using a script or some other form of automation?

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved