Photoshop :: Advance Cutting
Sep 6, 2003I have seen in a photoshop book or a tutorial how u can cut a picture not with the lasso or extract tool. I think they replaced the colors... not sure.
View 7 RepliesI have seen in a photoshop book or a tutorial how u can cut a picture not with the lasso or extract tool. I think they replaced the colors... not sure.
View 7 RepliesI have downloaded an eps file, which I need to cut. I use a graphtec ce5000-60 cutter, and a plugin called cutting master 2 in order to use coreldraw.
when i select application launcher and choose cut / plot, it opens cutting master. when i do this, it only shows the 2 outer lines of the logo i need to cut. I have attached a screenshot so you can see exactly what I mean. I have tried lots of things to recitfy this, but as a complete beginner with this software, I really dont have a clue.Â
Is there a way to cut a solid into two pieces using a non-planar cutting plane? I have been tasked with calculating the volume of concrete damage in a chute block. I have a sketch of the damage on the chute block. I created the chute block as a solid and then drew the damaged area extents using plines. This created non-planar plines. Is there a way to get this to work that will allow me to see the volume of the concrete damage? I need an easy way to do this, there are 50 chute blocks all the same size but with varying degrees of damage
View 1 Replies View RelatedUse of the Comments field in the Advanced settings for JPG export. Has this got anything to do with SEO. Where are these comments seen and by what or who?
View 1 Replies View RelatedI just got a new computer and use Lightroom 3.6. Now when I make a slide show and save it as a PDF it won't auto-advance to the next slide when running. When I review it in Lightroom it auto-advances fine but when I run the PDF file it sticks on the first slide and must be advanced manually. I believe I'm running the latest version of Adobe Reader as I just downloaded it last week when I got my new computer. how to get the auto-advance feature running like it did on my old computer?
View 2 Replies View RelatedHow do you disarm the auto advance timer in Slideshow mode of Lightroom?
View 1 Replies View RelatedHaving problems getting the advance key to highlight in this area. I have repeated these instructions and problem still is not resolved.
This is the area that I am having problems with. To customize a halftone screen.
1. Click File Print.
2. Click the Color tab.
3. Enable the Print separations option.
4.Click the Separations tab.
5. In the Options area, enable the Use advanced settings check box.
6. Click Advanced.
7. Change any of the following settings:
•Screening technology
•Resolution
•Basic screen
•Halftone type
You can set the screen frequency, screen angle, and overprint opt. ions for spot colors as well as process colors. For example, if you have a fountain fill made up of two spot colors, you can set one to print at 45 degrees and the other at 90 degrees.
How do I permanently turn off auto advance in Library? It seems to randomly turn on.
View 1 Replies View RelatedI need to apply individual unique keywords to a large (1000+) set of images. Is there a faster way to advance to the next image after applying a keyword than using the mouse to select the next image from the library browser? A feature similar to the Shift>[rating number] trick to advance to the next image while assigning ratings?
Â
My lack of knowing this trick is killing my productivity by at least a factor of two.
Why don't arrow keys advance slides in LR5 slideshow module
View 1 Replies View Relatedcreate animation effect in adobe edge URL.... actually it is created in flash.does this tool supports Mask effect like flash or not?
View 2 Replies View RelatedI tried to open / import a STEP .stp file into Inventor 2012. I selected all of the options to Autostitch and Promote. But I noticed that I could not select Enable Advance Healing.
1) Is there a reason I can't?
2) is there a better way opening / importing .stp files?
AutoCAD 2012 / Inventor 2012
As a pro, I crop all my photos.I normally use the forward arrow to move through each image, but with the crop tool the forward arrow doesn't work for advancing to the next frame.It only adjusts the crop.This is extremely frustrating for me as it slows down my workflow.
Â
Is there a one key shortcut, within the Crop Tool -- that permits us to move forward from frame to frame?I wish the forward key worked for this within the crop tool!
Â
Is there an easy answer or a way to format something in Lightroom -- so I can have a one-key method to advance frames within the Crop tool?
I made a design last night that included me cutting out a model from one of my photoshoots, so I did that... and then after all was said and done, I'm thinking she looks a little choppy and "dropped" into the photo. is there some way to make her look a little more smooth?
I got most of the edges cleaned up and used a feather, and even burned around the edges a tad to make it blend but it still looks very cut out.
I use Photoshop 8.1I have to make 100 pictures of some car antenna cables. When I have those pictures, I need to cut them out.I think in english it is called crop. (I have dutch versionATM I am doing every picture manually as the are all different. IS there a macro or plugin that cuts out the pictures itself or even help out with it alot ?Getting a bit fedup with setting all the achor points and straighten the lines.
View 8 Replies View RelatedI have created a new document consisting of just 2 layers.
The bottom layer is transparent and the top layer is filled with red.
What I want to do is cut out a rectangle from the top layer revealing the transparent layer underneath.
I have read somewhere that i should use the regular lasso to cut images, but that is a a lot of work if i have an big image.
So i was thinking if someone have any tip or in another way , maybe someone wanna cut the image out for me i am a bit shaky on my hand when i use the lasso-tool so its hard to get it good even if i zoom, and besides that ,is the cut-job ,well its important,
but its a thing that i wanna get over as soon as possible so i can start being creative ill post the image i will work with (its only the shape i want) it will be bigger in reality but i had to take a smaller pic of it to get it posted :
I raise chinchillas and would like to cut out some images and just change the background on others. Being that it is a fur animal (samples below) and it has all different lengths and curves....how would I do this? I'm new to photoshop other than playing with curves and stuff to make them nicer photography.
View 7 Replies View RelatedI'm creating a games website and therefore need a lot of images. However, I was just wandering was there a good way of cutting? Should I just use the lasso tools?
View 2 Replies View RelatedI am trying to take out an area of a photo. I have it selected. I want that area deleted and replaced with something similar to it's surroundings.
I have a picture of a barn... there is a large white post that I don't want there. The post is surrounded by flowers. I'd like it to look like a big patch of flowers with no post.
quickly cut around people, objects are ok with the "refine edge tool" but people, particulary the hair is hard to do..
View 18 Replies View RelatedIm trying to switch from Fireworks to Phosotshop. In FW you can draw two shapes and with both selected punch, unify, etc the two shapes. Could some one help me along on how to do the same thing in PS?
One more question. Is it possible to align a selected item to the stage rather than to another object? Fireworks can align objects center of the stage or left, right, top, etc.
I am trying to make a logo in black and white where the letters of the text have the opposite color of the background.
there are three major elements in the logo
background (white)
KN (big letters in black)
kyushu and network (small letters that have to be in opposite color )
can anyone help me with this ?
cutting out an image without using that tool where u have to cut out the picture in a squre form but i want to make it so i can cut out JUST the picture and I can add text behind the picture.
View 2 Replies View RelatedI created a picture in Photoshop 10.5in X 4in now i would like to cut it into 6 picture all 3.5 X 2 (like a business card size) I was creating a fridge magnet for my Church. Each week we will hand out one piece of the picture and after 6 weeks they will have the full size of the picture to put on there fridge. So, how can I cut the picture into 6 pieces and when they are reassembled they will all fit. I use Photoshop 6.
View 5 Replies View RelatedI have a sprite sheet, which is a single image composed of about 800 smaller images that are separated by transparency.
I need a simple way to cut each sprite out and save it as its own image (or put it in its own layer) without manually selecting and saving. Is there a way to do this using a script or some other form of automation?
When i select text for my signature im trying to cut it out.
but when i got to cut all i can do is copy it.
Is there an option in Photoshop to add Cut Markers to a Print job such as Business Cards, etc.?
How can I add the Cut Markers to my work?
The right-click -- Layer via cut/ option isn't selectable(grayed out) whenever I make selections...
View 1 Replies View RelatedIs there a tool to cut a poligon in half? see what im tring to do is create a few poligos. cut them.. space them away a bit.. with text behind it.. make it look like broken glass or something.
View 1 Replies View RelatedI have this photo of a tree in the forground, with a house behind it. I want to remove the house from the photo, would it be easier to select the tree and put it on a different layer or select the house and remove it. ? What is the best way to select a tree like this? I have read that the pen tool is not the correct way to select trees and leaves.
View 4 Replies View Related