I have this photo of a tree in the forground, with a house behind it. I want to remove the house from the photo, would it be easier to select the tree and put it on a different layer or select the house and remove it. ? What is the best way to select a tree like this? I have read that the pen tool is not the correct way to select trees and leaves.
View 4 RepliesI have downloaded an eps file, which I need to cut. I use a graphtec ce5000-60 cutter, and a plugin called cutting master 2 in order to use coreldraw.
when i select application launcher and choose cut / plot, it opens cutting master. when i do this, it only shows the 2 outer lines of the logo i need to cut. I have attached a screenshot so you can see exactly what I mean. I have tried lots of things to recitfy this, but as a complete beginner with this software, I really dont have a clue.
Is there a way to cut a solid into two pieces using a non-planar cutting plane? I have been tasked with calculating the volume of concrete damage in a chute block. I have a sketch of the damage on the chute block. I created the chute block as a solid and then drew the damaged area extents using plines. This created non-planar plines. Is there a way to get this to work that will allow me to see the volume of the concrete damage? I need an easy way to do this, there are 50 chute blocks all the same size but with varying degrees of damage
View 1 Replies View RelatedDoes anyone have any nifty techniques to simulate a tree carving? I'm looking to "carve" items into a photograph of a tree...
View 7 Replies View RelatedSo I am trying to take an image of a tree trunk (or a school desk, or a wooden door) and "carve" a heart with some people's names into it and make it look somewhat realistic, as if they carved their names into it themselves.
I am not completely new to photoshop, I can find my way around and have edited several other projects. I am, however, completely stumped on how to do this one. Please help! Let me know if you need any more info.
I am looking for a way to make a realistic looking heart on a old oak tree using photoshop
View 2 Replies View Relatedi m making a 3d model of landscape design, i need some trees from photographs for visualization purposes in elevations. however it's not possible to extract them from a photograph neatly using extract tool from filter. how can i do a nice extraction?
View 2 Replies View Relatedsince you photoshop gurus have been so nice in welcoming me into the community, i thought i's give a little something that could be useful to you in the near future. direct from my camera is a few of tree bark photos that can be used as textures i can happily post up here for you lot to use as resouces
ON ONE (OPTIONAL) CONDITION:
you post the work you used it in up here, i'm always happy to see my resources put to use, and it saves me the the time looking for where they were used, so it would be nice, however you don't have to
second one is blurred a little bah! still useable. more textures soon.
Someone reminded me just recently (OZ) that i had posted the files for this effect on my old board. So i've tightened up the Actions even more now, and i'm reposting them here on this board for anyone that wnats to use them. No strings... Code:
View 9 Replies View Relatedhow to create realistc or semi realistic trees in top view,
View 2 Replies View Related1. I'm not very satisfied with the snow in the trees, i've tried many filters and finally used "replace color" on the greenish parts of the trees with luminosity at 100%. I've compared with real snow covered trees and they are completely white, i guess that i should somehow "paint" them but i don't know a lot about how to achieve a realistic snow effect with the brushes (without degrading too much the original trees either...)
2. The icy sea is taken from another photo i found on the web (probably antarctica). It seemed to blend nicely when i was working on the retouching but when i opened the project 2 days later i thought that the colors of the two photos didn't blend *that* nicely Is there a "scientific" way to harmonize the colors of two photos, so that they can fit well together? (i'm prepared to hear that there's no recipe for that!)
(seemed to me that the blending of colors is top priority but perhaps something else is jumping even more at your eyes).
How do I remove the background except the tree. I tried to remove the background but it didn't work?
View 4 Replies View Relateddoes anyone know how i'd be able to make this tree-top shape and the effect that's on the actual tree?
View 2 Replies View RelatedI was told to make an effect of a xmas tree in the sand of a beach, identically has someone had really drawn it there, like those draws we make with a stick in the sand.Any ideia of the tools and techniques to reach something of the kind? Bevels and embosses, clones...
View 3 Replies View RelatedI need to make a selection of this tree:
so that it looks like this:
and its proven to be very difficult. My tree looks pretty terrible, and it's definitely not as clean as the tree in the poster. I'm using the quick selection tool.
PS CS6 and Win7/64...We just finished shooting a 3 day conference for 600 people, that involved many break-out sessions. Our folder tree of all the finished TIFFs is organized by day, then by topic, and then by break out. All in all there are 75 folders in the tree, with close to 700 TIFFs.
The client wants both hi-res and lo-res JPGs (not the TIFFs).I have a very simple droplet that will convert a TIFF to JPG, but works only on a given folder, and outputs to a generic folder (so I have to copy these back).
Is there a way to create a droplet that will
(a) walk the source tree and convert the TIFFs of each folder to JPG, as well as
(b) Have PS create a matching tree to deposit the JPGs into the corresponding folders?
I know there's an option to include all folders when doing the conversion, but (b) is the critical element so I don't have to do this in a folder-by-folder basis.
I want to know how we create this background effect on trees?
View 10 Replies View RelatedI can't take a good photo, but the Mother-in-Law is quite an avid photographer. She went on holiday recently to Tsitsikamma, & Kruger Park, both here in SA. I asked if she would take some photo's for me I could use as textures and/or backdrops. Last night I got my photo's
This one I just clipped from an image of a really old tree. Played around with it, and I mean played as I'm certainly no expert. This is the result Very Necronomicon looking. It just shows, sometimes you get more than you expected on a photo. I will certainly be playing with this some more.
I have been working on removing a tree that I photoshoped out.. the problem I have its over the top of buildings an I have been reproducing other areas of the building then reconstructing the building. I have one section that I can't really do this.
I stitched a photo together, I found another part of the image that I can use, but I need to blend it all.
See photo
can i create DUO/Tree/quadtone photos working in RGB? at least can i emule duo or treetone in rgb ?
View 2 Replies View Relatedhow you made that twisted looking tree branch or whatever that was over there on your desktop.
View 5 Replies View RelatedI'm having trouble with many newbie things... here's the list:
1) i have to deal with images of various sizes. What do I need to do to be able to have everyone's head cut out in an exact circle such that I can move them all around and they are the same size? I tried using the marquee tool but it made a different circle each time, more of an ellipse (hence the name of the tool I suppose).
2) does anyone know where I can get a picture of a tree that I can attach everyone's head to? how do I use that as my background? is that the same as adding a layer and having it as the bottom layer?
I'm somwhat of a PS newbie, but I know my way around. I want to put my face on a tree trunk and make it look like its part of the tree coming out. Is this possible or is there a plug-in to do this sort of thing?
View 1 Replies View Relatedwhere i can get the palm tree leaf brush for photoshop?
i know you can get a whole palm tree brush with stalk etc,
but i just want the leafy part.
How to setup elements-10 to arrange photos by folders in thich folders are dated (2011, 2012, 2013,...) with subfolders by date (01-22-13 Day at Fair). This was very easy in photo elements 6.0 in which the directory tree resided in a left side window pane.
View 1 Replies View Relatedcan I show all media files in tree view? I used to be able to in PSE 5....what a shock going from 5 to 12!
View 2 Replies View RelatedUsing CS4. I used the blob paint tool to make a tree. I now want to use a text to cut out of the tree. I have tried creating outlines on the text and using all of the pathfinder tools to no success. I have also tried using the compound path method and that has not worked either. Is there something I have to do to the tree in addition to what I have done to the text?
View 2 Replies View RelatedI used ReconstructMe to scan a botanical tree (with a few of trunks and leaves). The result I got is a 3d mesh botanical tree. I open them in 3dsmax. Now I want to add the motion to each leaf and trunk. I am beginner in 3dsmax.
By the way, I think all the trunks and leaves are considered as one object. Do I need to break them seperately and add animation to each of them?
I read some tutorial for character animation, which use biped or skining. However, they are used for human, aren't they? I wonder if I could apply biped/skining for botanical tree since their structure are different.
I am trying to write a 'duplicateLayer' function, and I've read all the related posts on these forums. It seems most of the responses have only addressed art inside a layer, and not nested layers/groups. I need to be able to duplicate ALL items in a layer.
I can get the sub-layers, but I can't figure out how to preserve order of the items in the new layer. For example, if my layer looks like this:
layer 1
art 1
art 2
sub layer 1
sub art 1
art 3
I can call layer.pageItems to get my three art objects and duplicate them, and I can call layer.layers to get my one sub layer and duplicate it. But how do I preserve the same order of the art objects and sub layers with respect to each other?
I am trying to read the xref tree from a DWG by using an external exe. The app should simply open the DWG and sys-out the referenced paths and whether or not they are nested. For this, I am using Autodesk.AutoCAD.Interop. The problem is that I can only get a list of file dependencies (document.FileDependencies) and I can't seem to find an "isNested" value.
So far I've got:
AcadDocument document = oAcadApp.Documents.Open("Test.dwg");
foreach (AcadFileDependency o in document.FileDependencies)
{
System.Console.Out.WriteLine(o.FullFileName);
}
There is also the option to get Blocks, but again there is no "isNested" info, only "isXref":
foreach (AcadBlock b in document.Database.Blocks)
{
if (b.IsXRef)
{
...doStuff...
}
}
Using Inventor 10, I have replaced several components of my assembly with new copies of the components to be modified into new parts. For some reason the model tree still shows the old part numbers, but editing the parts reveals that they are indeed the new parts. How to correct the part listing in the model tree?
View 9 Replies View Related