Photoshop :: Copy Changed Files To Folder
Mar 5, 2008
Used ACR to crop, straighten, adjust exposure, etc to a bunch of files. Used the File/Copy to command to extract images to new folder. To my surprise, the files were not cropped, straightened, etc in the destination folder. I know in ACR that "open image" will open the image in PS with all the changes but how can a bunch of files (including ACR changes) be copied to another folder?
Here is what I'm trying to do.
1. Let Bridge get jpg files from camera.
2. In Bridge, open files one by one in ACR, make adjustments (straighten, exposure, etc), and click "done" to save changes in same folder.
3. Once all files have been adjusted, copy files (tried using "copy to" in Bridge) to new destination folder.
4. Use PS batch command to run an Action to cropped photo to 600x900 (or 900x600) 72 pixels and sharpen photo. Do this for each source file and save to a new destination folder.
I'm okay with steps #1-2 but stuck on #3 as described above.
View 3 Replies
ADVERTISEMENT
Dec 3, 2013
When importing something off of a DVD or CD how do I direct Lightroom to copy the imported images or folder to a specific folder on my hard drive? It seems to default to MyCatalog but leaves the location on the CD rather than copying it to the drive. If I remove the CD the images is reported as missing.
When I go to the top of the screen for importing I can change the source but the location info on the right is not active or changeable.I am new to lightroom and coming from Photoshop Elements background.
View 2 Replies
View Related
Jan 18, 2012
Do you want to save it anyway?I'm starting to get this message again a lot. It went away for awhile, and is now back.It started with CS5.
I think Adobe blames it on other software but cannot pinpoint it?
View 82 Replies
View Related
Apr 29, 2012
when you rename a photo in LR the name should also change in the root folder.However this does not seem to be happening, I have checked the name in Lightroom and it has changed, ie. family_trip_100 then I go into the folder and bring up the only and exact same photo and it says it is family_trip_7-2
View 2 Replies
View Related
Mar 20, 2014
I have managed to have to re-load my Lightroom 5 catalog which unfortunately is a month out of date. During that month I changed my folder structure and whilst I can see the folders and images on my hard drive, my Lightroom 5 catalog is as it was a month ago without the new folder structure and with a lot of photos missing. Obviously the link between the images and Lightroom has been lost because I changed the folder structure without backing up the catalog. re-link my photos and album structure to Lightroom ?
View 2 Replies
View Related
Aug 29, 2012
I am trying to copy big assembly with its folders from one folder to another.I cant use Copy Design because I get too long path error.
Alternative way of copying files and keeping its relationships?
View 3 Replies
View Related
Jun 18, 2013
With the plugins I have with CS6, do I just copy them from the cs6 folders and put them in the CC folders, or do I have to install from scratch?
View 6 Replies
View Related
Mar 11, 2012
My RAW files have been changed from .NEF files to .XMP Files. How can I change the files back to RAW files?
I am using CS4 PhotoShop and Bridge.
View 15 Replies
View Related
Nov 11, 2013
How do I copy a photo from one folder to another? I'm using Elements 8.
View 3 Replies
View Related
Jun 4, 2008
If a file was worked on a mac can I bring it to windows and do additional changes?
View 14 Replies
View Related
Dec 2, 2008
Using PS3, all of a sudden when I use the file open all the directories come up in reverse. By that I mean the folders are at the bottom and the files are first. If I switch to use adobe dialog it shows correct, folders at top and files underneath.
I tried to reset prefs but that didn't work.
View 10 Replies
View Related
Mar 3, 2011
Example: I have original files structure like:
FOLDER 1:
1.jpg
2.jpg
3.jpg
FOLDER 2:
1.jpg
2.jpg
3.jpg
The goal is to create edited (resized black/white) COPY of each file in each folder without resaving original file. So it must look like:
FOLDER 1:
1.jpg
1 copy.jpg
2.jpg
2 copy.jpg
3.jpg
3 copy.jpg
Folder 2:
1.jpg
1 copy.jpg
2.jpg
2 copy.jpg
3.jpg
3 copy.jpg
-- I can write without problems Action for each special folder, but it take too many time to make 1000 Actions like 1000 folders I have. The problem is in SAVE AS command wich I use in Action. It remembers folder witch was used while recording. Then if I try "Override SAVE AS" option in the Batch window I get edited original files without creatig copies.
I can choose destination NONE, SAVE AND CLOSE, FOLDER. Simply, what I need is SAVE AS COPY AND CLOSE.
View 4 Replies
View Related
Oct 14, 2012
I am looking to copy to a named folder a selection of photos that I intend to incorporate in to a ProShow Gold slide show so that ProShow will always know where they are. When I select copy I don't see an option to copy to a specific location.
View 2 Replies
View Related
Mar 12, 2013
Have 32bit windows. Have a plugin installed in CS6, how do I copy the folder into PSE10?
View 9 Replies
View Related
Jan 19, 2012
I opened my catalog today and went to one of my folders (2011/9 September). I noticed that there were pictures in the folder that did not belong and had the wrong name attached to them. I was surprized so I right clicked selected "Show in Finder" the folder 2011/9 September opened the photo was not in the folder.
Knowing the folder it should be in I went there and sure it enough it is there with it's original name.Went back to lightroom optimized the catalog... still there. Deleted folder in Lightroom, reimported, but the files came back.
The folder on the finder has 96 pictures, the folder in Lightroom shows 146.I can deal with removing the 40 odd files in this situation but I am afraid it will occur in one of the folders where there are a couple of thousand images.All my other folders seem fine for now, what would cause this issue?
View 4 Replies
View Related
May 14, 2013
I've noticed an annoying fact about PS CS6 that never happened in earlier CS versions: If I have a few files open at the same time, and I make a transformation in an image, then move on to antother image, maybe to edit something out of for the first one, when I return to the first image, the change I made is undone, and the image is back to where it was before the transformation. I haven't hit "undo" or any other command in hte interim-I just navigated to a different file and didn't touch the first one for a few minutes. Simply put: if I make a transformation such as rotating something or changing scale, then click on a different file, make changes there, then go back to the first file, it's as if I had never made the last transformation. I ddin't save the file, but why should I have to? I simply left it momentarily. It doesn't happen consistently, and it isn't a deal-breaker, but why does it happen at all? And how can I stop it?
View 2 Replies
View Related
Jan 11, 2013
i have various files which I cannot copy elements of into other drawings.
when i use the ctrol+copy command, I get the "copy to clipboard failed". This has only started since I upgraded to AutoCAD2012.
View 4 Replies
View Related
May 31, 2012
I want to use Lightroom to import around 40,000 images and thousands of videos.
1. How will I import all of this content? Do you just drag them into the program?
2. If I copy a folder containing 100 images into Lightroom, does Lightoom copy those images to another location to put all of the content in one spot?
3. Is it possible to use Lightroom with multiple harddrives? Example: I have a Macpro computer with 4 built in harddrives, and other harddrives that I swap back-and-forth. Can I somehow use Lightroom to tag and search for all of this content on these multiple drives?
View 6 Replies
View Related
Jan 27, 2012
All my PDF files have changed to CDR files, when exporting PDF it changes to CDR.
View 2 Replies
View Related
Oct 16, 2003
How to copy an IAM & several parts to another folder (I created a new project folder for them) using DA without messing up the original file structure. I'd like to change the new IAM file name & only several of the parts that are not common to the original (Stand alone environment, no network).
View 5 Replies
View Related
Jul 2, 2012
Why for some reason or other, all my xar.files have changed to DP7's icon? I have hundreds of files and not being able to see a thumbnail of them is a nuisance. They were all showing just fine then when I switched on the next time, they had all changed to icons. I'm still running Windows Vista 32 bit, which I have never had a problem with, so how to get the thumbnails back?
View 3 Replies
View Related
Mar 15, 2014
With PSE_6 under Windows 8.1, the Editor doesn't offer saving of changed picture files in stack, though it creates stacks in Organzer automatically. Any solution?
View 2 Replies
View Related
Jun 23, 2011
I often want to copy a design (assembly plus used parts) to some other folder as a quick start for some derived work. I want to be able to work on this copy without influencing the original and visa versa.
The problem is when copying with the windows copy command, the references to the parts point to the original folder. I read that you can use the Copy feature of the Vault for this. But I'm not using the Vault and don't want to.
Pack and Go is also not a good solution because it copies a lot of other stuff and makes a new project file. How can I do this. It seems so a simple operation. But I can not figure out how to do that!
View 9 Replies
View Related
Jul 25, 2013
Can I copy and past an assembley file to another folder in my system,as like as packandgo using inventor api ?
View 2 Replies
View Related
Mar 14, 2011
I want to resize pictures but still have a copy of the original kept in the folder. I am used to Microsoft "Picture it" which has a duplicate feature.
View 1 Replies
View Related
May 14, 2013
What is the proper way to copy a project to a new folder and the projects not be linked in any way to each other. In other words I want to have a completely independent project that I can make minor changes to without it affecting the original project in any way because no matter what copy method or pack-n-go I have tried, the link is still there from the new project to the original. How do i break that link.
AutoCAD 2013
Inventor 2013
Windows Pro 7 x64
Asus Sabertooth X58
Intel Core i7 960 @ 3.2 GHz
24 GB ram
View 8 Replies
View Related
Mar 27, 2012
Before i import from my SD card into lightroom I create 2 named folders - one on my hard drive and another for back up on my external hd.In LR inport dialogue box I choose the hard drive folder as my main destination and select my ext hard drive folder as my make second copy to folder
I untick the make a second copy to box.I choose Copy and click import..All images are copied OK but only the hard drive folder shows up in the folders display area under library even though the back up copy shows in the ext hard drive folder.
Is it possible to get both folders to show in the display?
View 1 Replies
View Related
Jan 9, 2014
I exported my 90 minute clip for DVD last night - these were split as I am used to into a M2V file and a WAV file - I checked it and had a look last night. I then turned my computer off for the night and have awoken to one file which is a XMP file?I am now using CC so have the latest Adobe Premiere and haven't changed anything else that I am aware of.
View 2 Replies
View Related
Dec 27, 2013
I am using Photoshop Elements 10 Version 10 (20110831.m.17215) and everytime I plug in a memory card to upload images it wants to upload every image on the card, even though it has previously uploaded images from that card, even though I have the "Copy New Files Only (Ignore Already Imported Files)" box ticked in the preferences Camera or Card Reader section. This gets very frustrating and time consuming when I have to go through the images every single time to uncheck the images that have already been uploaded.
View 3 Replies
View Related
Apr 1, 2013
I had copied a .PNG file into the source folder and wanted to import it into the Lightroom catalog.
However the import dialog does not show that file in the source folder at all.
I also tried the method of selecting the source folder and using the "Synchronize" option. But that did not show the .PNG file either.
My clumsy work-around was to open the file in CS6 and save it as a .JPG file.
So my question: how can I tell Lightroom which file types (extensions) I want to be able to import?
View 1 Replies
View Related
Apr 5, 2014
I have a bunch of Fuji X-T1 raw images that I have converted to DNG form. Once Lightroom supports X-T1 raw images directly, I would like to replace the DNG files by the corresponding raw files (which I have saved) without having to redo all of my edits.
I've tried an experiment with a NEF file, which Lightroom supports: If I convert it to a DNG file, import the DNG file, then replace the DNG file with the corresponding NEF file, Lightroom still thinks the file is named DNG. This behavior makes me nervous. So what I would like to do is to import all of the Fuji raw files, then transfer the develop settings from each DNG file to the corresponding raw file, then finally archive and delete the DNG files.
Is there any way to do this other than by hand? That is, if I have a folder with a few hundred DNG files, is there any way to tell Lightroom to take the develop settings of every file in the folder and transfer them to the correspondingly named file in the folder of raw files?
way of accomplishing this that does not involve copying and pasting the data for every image by hand?
View 3 Replies
View Related
