Using PS3, all of a sudden when I use the file open all the directories come up in reverse. By that I mean the folders are at the bottom and the files are first. If I switch to use adobe dialog it shows correct, folders at top and files underneath.
I tried to reset prefs but that didn't work.
I've noticed an annoying fact about PS CS6 that never happened in earlier CS versions: If I have a few files open at the same time, and I make a transformation in an image, then move on to antother image, maybe to edit something out of for the first one, when I return to the first image, the change I made is undone, and the image is back to where it was before the transformation. I haven't hit "undo" or any other command in hte interim-I just navigated to a different file and didn't touch the first one for a few minutes. Simply put: if I make a transformation such as rotating something or changing scale, then click on a different file, make changes there, then go back to the first file, it's as if I had never made the last transformation. I ddin't save the file, but why should I have to? I simply left it momentarily. It doesn't happen consistently, and it isn't a deal-breaker, but why does it happen at all? And how can I stop it?
View 2 Replies View RelatedMy RAW files have been changed from .NEF files to .XMP Files. How can I change the files back to RAW files?
I am using CS4 PhotoShop and Bridge.
If a file was worked on a mac can I bring it to windows and do additional changes?
View 14 Replies View RelatedUsed ACR to crop, straighten, adjust exposure, etc to a bunch of files. Used the File/Copy to command to extract images to new folder. To my surprise, the files were not cropped, straightened, etc in the destination folder. I know in ACR that "open image" will open the image in PS with all the changes but how can a bunch of files (including ACR changes) be copied to another folder?
Here is what I'm trying to do.
1. Let Bridge get jpg files from camera.
2. In Bridge, open files one by one in ACR, make adjustments (straighten, exposure, etc), and click "done" to save changes in same folder.
3. Once all files have been adjusted, copy files (tried using "copy to" in Bridge) to new destination folder.
4. Use PS batch command to run an Action to cropped photo to 600x900 (or 900x600) 72 pixels and sharpen photo. Do this for each source file and save to a new destination folder.
I'm okay with steps #1-2 but stuck on #3 as described above.
All my PDF files have changed to CDR files, when exporting PDF it changes to CDR.
View 2 Replies View RelatedWhy for some reason or other, all my xar.files have changed to DP7's icon? I have hundreds of files and not being able to see a thumbnail of them is a nuisance. They were all showing just fine then when I switched on the next time, they had all changed to icons. I'm still running Windows Vista 32 bit, which I have never had a problem with, so how to get the thumbnails back?
View 3 Replies View RelatedWith PSE_6 under Windows 8.1, the Editor doesn't offer saving of changed picture files in stack, though it creates stacks in Organzer automatically. Any solution?
View 2 Replies View RelatedI exported my 90 minute clip for DVD last night - these were split as I am used to into a M2V file and a WAV file - I checked it and had a look last night. I then turned my computer off for the night and have awoken to one file which is a XMP file?I am now using CC so have the latest Adobe Premiere and haven't changed anything else that I am aware of.
View 2 Replies View Relatedwhen I open DNG files in the Develop Module, the basic tab is different than when I develop RAW/NEF files? With NEF files there are sliders for shadows, highlights and clipping but with DNG they are different - blacks, recovery, fill light. etc.. Why is this and is there a way to make the Basic tab the same for both (both like the NEF Basics tab)?
View 1 Replies View RelatedDue to consolidating space on my hard drive I changed the location of the orginaly linked files (MXF footage). Having relinked in both Pr and Ae (CS6 latest updates as of posting date) to the new file location all looks good until I try to view the horizontally flipped clip in the sequence. If I look at the footage on Ae its all there, every frame. In the effects for the clip the opacity is as it should be -100%- but there is no image. I see the background footage (working with green screen foreground -hence the Ae project using Keylight plug-in). The non flipped footage from the exact same Ae file is as clear as day.
View 2 Replies View RelatedI am unable to open files from the file "OPEN". I can open from Bridge or open recent document, but not from just File, Open.
My operating system is Mac OS X.
After getting no support from your phone support line. I am writing here in hopes that this issue can be resolved. I cannot open files or create new files in Photoshop CC trial.
View 3 Replies View RelatedI have CorelDRAW X4, when I open some file(s), which takes long time to open, even which file size is smaller or bigger.
View 1 Replies View RelatedAbout a month and a half ago, after a microsoft update, I cannot open .cdr files from the file/open list. When going to file/open, the programs hangs up, cannot even use "cancel", and have to go to Windows Task Manager to shut down the program. All is well until I try to open a file from file/open.
I can import .eps, and everything else seems fine.My work around is to open from My Documents --Which works fine. Just is a silly little aggravation.
I have uninstalled, reinstalled, repaired, etc....all the normal fixes.
I recently installed a student version of Maya 2012 on my home computer so I didn’t have to work from college for a project, but I have run into some issues.
Not sure what is going on with my Maya but it won't open files unless I actually go to it in the browser and double click on the file. Even once I have done that I can only save over it, save as doesn't work. I also can't create or set projects. There are probably more problems but these are the ones I noticed/really need.
This is what appears in my output window:
Could not find maya.utils._guiExceptHook.
Invalid Python Environment: Python is unable to find Maya's Python modules
Python Environment:
PYTHONHOME = C:Program FilesAutodeskMaya2012in
PYTHONPATH = C:Program FilesAutodeskMaya2012in;C:/Program Files/Autodesk/MayaPlugIn2012//scripts;C:/Program Files/NVIDIA Corporation/PhysX for Maya/Maya 2012/scripts
[code]....
I'm using Gimp 2.8.4 on a MacBook Pro.
I have been working on an image file for several hours now, and as a result, there were MANY files open (probably over 30).
I attempted to save the file, and recieved the following error message:
"Could not read the contents of [folder name] Too many open files"
I then closed each of the open files except the file I was trying to save, but got the same results.
The same error message pops up when I try to open a file as well.
Cannot open .AI files, I have run all the updates but still having to use Fireworks to open AI files.
View 2 Replies View RelatedI'm working with both Photoshop and Illustrator CS6 on a mac. I'm creating a graphic. The background is a (cartoonish) mouth and I finished it a couple of days ago. (It's an Illustrator file.) I've been working on the letters to go inside of the mouth, (Once I'm finished it'll look as though they're being crushed.) I scanned and edited small wooden letters in Photoshop, and now I would like to work with them with the background in Illustrator. I understand how to open a Photoshop file in Illustrator, but I don't want to open the document as a separate Illustrator file. Is there a way to open a file from Photoshop as a second layer?
Some of the letters repeat as well. Will I have to create two files for this, or can I open the same file twice?
After many years of using LR this is the first time I've encountered this issue (see 1st screenshot below). LR is scrambling my files. The affected raw files open fine in other programs, including adobe photoshop cc (see 2nd screenshot).
View 15 Replies View RelatedWhen I try to open up a new file in Photoshop CS6 only part of the image shows up, the rest shows as transparency. I have to close the image and open it again once or twice and then it opes OK.
View 11 Replies View Relatedhow to open XMP files? Fine for saving Meta data but what if you want to go back to a file later to recall what you entered?
View 6 Replies View Relatedi just upgraded from cs3 to cs6. i open one photoshop file just fine, then i click on another PS file so that i can drag a layer from the one to the other. but when i click on the second file it opens--but it closes the first file! this cant be right. how do i get 2 ps files open at once?
View 5 Replies View RelatedI bought a Nikon D7000 and can not open the Raw files (NEF) I did not have this problem with my Pentax and DNG files. I can not seem to find Camera Raw either.
View 3 Replies View RelatedI am trying to open some old PDD files, but I get a message saying I need Photoshop 3 to open them. Can I download Photoshop 3?
View 5 Replies View RelatedI'm studying Photoshop at home using Pearson's " Class in a Book", from Adobe. I'm now stuck in Chapter 10, editing Videos, because I cannot open two files needed to proceed with the next excercise. I'm not able to open 3 of the 9 files in Photoshop, even tried to drag, change format, etc. All the other files with formats like MP4 and JPG have no problem opening, only those with MP3 & MOV extensions. I Should note that I can open all the files directly from windows file explorer or using Bridge, through Quicktime.
Bellow, is the message i get when I try to move the file to Photoshop.
"Could not complete your request beacuse the video file could not be open"
Here is some information about my computer;
OS is Windows 8
Adobe Photoshop Version: 13.0.1 (13.0.1.2 20130522.r.24 2013/05/22:21:00:00) x64Operating System: Windows NTVersion: 6.2 System architecture: Intel CPU Family:6, Model:12, Stepping:3 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreadingPhysical processor count: 4Logical processor count: 8Processor speed: 3392 MHzBuilt-in memory: 12199 MBFree memory: 9861 MBMemory available to Photoshop: 10892 MBMemory used by Photoshop: 70 %Image tile size: 128KImage cache levels: 4OpenGL Drawing: Enabled.OpenGL Drawing Mode: AdvancedOpenGL Allow Normal Mode: True.OpenGL Allow Advanced Mode: True.OpenGL Allow Old GPUs: Not Detected.Video Card Vendor: NVIDIA CorporationVideo Card Renderer: GeForce GT 640/PCIe/SSE2Display: 1Display Bounds:= top: 0, left: 0, bottom: 1024, right: 1280 Video Card Number: 1Video Card: NVIDIA GeForce GT 640OpenCL UnavailableDriver Version:
[code]....
Photoshop CS5 will not open files. Occasionally if i try to open a .psd file that has already been created by double clicking on it in its folder, it will open but I will hardly be able to edit it. For example, the brush tool does not work, crop tool, resizing image etc. I had this problem 2 weeks ago. I uninstalled adobe creative suite, ran the adobe cloud cleanup tool and then reinstalled the programs and everything worked again. However after a week everything suddenly went back to the way it was again. Very frustrating! I might as well mention that at the same time as Photoshop "crashed" I also became unable to drag objects in Illustrator and InDesign.
ComponentDetailsSubscoreBase scoreProcessorAMD Athlon(tm) II Dual-Core M3205.03.0 Determined by lowest subscoreMemory (RAM)2.00 GB5.5GraphicsATI Mobility Radeon HD 42003.0Gaming graphics894 MB Total available graphics memory3.4Primary hard disk199GB Free (254GB Total)5.8Windows 7 Home Premium
[code].....
I have it on my Mac. I tried opening a file that I worked on a while ago and Photoshop opened, and I could see all of my layers on the right, but the window with the actual picture did not come up. I thought maybe there was something wrong with the file, so I tried opening a new file, but I had the same problem. It showed the background layer, but I couldn't see the actual image.
View 6 Replies View RelatedI have it on my Mac. I tried opening a file that I worked on a while ago and Photoshop opened, and I could see all of my layers on the right, but the window with the actual picture did not come up. I thought maybe there was something wrong with the file, so I tried opening a new file, but I had the same problem. It showed the background layer, but I couldn't see the actual image.
View 3 Replies View RelatedI'm using Photoshop CS6 Extended (64-bit) for a few month without any problems. But now it doesn't do anything when clicking "File" > "New..." or trying to open a picture or PSD-File. I've also tried the same with an older Photoshop version (CS5), but here it also won't work.
View 1 Replies View RelatedI have Photoshop CS5 and a Nikon D800. I can't open the .NEF files. Is an Adobe Camera Raw download available for CS5 that will do so?
View 3 Replies View Related