Photoshop :: Colors Not Selecting Right
Oct 4, 2004
I want to alter a simple image from one color to another. The image is a gif image and I want to change it to color code #EF8216. Should be simple enough but when I type that in it gives me a color close to that but not that color (even though it says it is #EF8216). I have used CatchColor to test this and PhotoShop CS is not selecting the right color. I have tried using different ways of selecting the same color but none work. I need the color to match with part of my web site which is using #EF8216. When I use the bucket and save it, you can tell the diffence very easily with the naked eye.
How can I get PhotoShop to select the color I want?
View 9 Replies
ADVERTISEMENT
Oct 24, 2013
Where is the option to have the Eyedropper only select solid colors and not multiple colors when sampling colors? I select the Eyedropper tool and do not see any options for this in the control panel.
I only have options for Sample Size, which layers to sample from, and whether to show sampling ring.
View 1 Replies
View Related
May 19, 2008
I have a question about selecting sections of an image to copy or edit, and the best/easiest way to do it. I've been using the Pen to draw a line around the edge of the section(s) I want to edit, than tidy up the lines, convert it to a selection, and go from there. But this can often take a very long time.
if there was a better, faster and/or easier way to do this, or if using the Pen tool is probably the best way?
I'll use
this image
as an example (for lack of a better example image). Perhaps I want to take the dark blue area of the skirt, chest and feet and edit them to a different color (maybe I want to turn them red, for instance). Obviously the image has shading so not all of the colors are exactly the same, so the Magic Wand wouldn't help much.
To edit these sections, would using the Pen tool to drag a line around the edges and convert it to a selection be the best way, or is there another better way to do this?
It may be a stupid question, but I just thought I'd ask just in case there was a simpler way for me to go about editing my images.
And if it makes any difference, I have Photoshop CS2.
View 4 Replies
View Related
Apr 17, 2007
I can bing up the color picker right? then hover over the brush or what ever you call that over the old image on a certain color to try to get its hex value.. Now how would I do this on Illustrator?
View 2 Replies
View Related
Jul 21, 2012
Using it to design minecraft textures. The textures are quite small, each block being 32x32 pixels and arranged in a 512x512 pixel sheet. Basically, I'm making a lot of small icons. Now, what I want to do is select an area, and change just some colors within it - like changing all greys for green or all reds for blue. I cannot find how to do this, apart from using the Wand to select the parts by themselves and change - it is possible, but veeery time-consuming (due to low resolution, every pixel that goes wrong will be noticed).
View 2 Replies
View Related
Sep 25, 2008
I am having a problem with a delay in selecting an object and selecting a command.
When I select an object the pointer has at least a 3 second delay before it starts moving around normally again. It is the same with selecting a command. This has started to get tedious. It has worked fine in the past so I don't think it is a RAM/graphics card problem.
View 5 Replies
View Related
May 15, 2012
OK, today, or actually just this afternoon I've noticed it has become much harder to select items with the mouse.
Points, nodes, etc...anything where you'd typically hover the mouse over the item and it highlights for you to select it.
For example, lets say you want to project a point from another sketch, or select the center node of a line, etc.
Never really had an issue until this afternoon where now it seems I have to be right on top of the item and I cannot budge one bit or it won't select it. It is now taking me numerous attempts to select things like points (zooming in does not work, points scale accordingly).
Is there a setting somewhere? I can't seem to find such under Tools>Application Options and the like.
View 8 Replies
View Related
Jun 28, 2012
I recently installed CS5 on my laptop after first removing it from my previous machine.All licences were validated so no problems there.Now when using paint bucket in Photoshop, the colors that I select in the color picker are not the colors that result when I use the paint bucket.
Â
If I create a new black canvas then the colors selected in color picker work with paint bucket.But if I attempt to recolor the background in an existing image that I import into Photoshop, I get the mismatch with colors when I use paint bucket. My method for selecting colors is the same in each case, I select 'set foreground color' and set the color using html values entry at the bottom of the panel.
View 11 Replies
View Related
Jul 7, 2013
Just wanted to print a new photo and realized that the colors in print preview do not match the colors in soft proofing. In both cases I selected the same icc profile and rendering method. The print colors matched the colors in print preview. I never had a problem so far. All new prints will be checked with soft proofing and adjusted when necessary. I never paid attention to the color rendition in print preview and all prints perfectly matched the colors from the soft proofing. I was surprised when my print came out of the printer and the colors weren't matching the soft proofing colors, but that of the print preview.
Â
I don't understand why Photoshop renders the colors differently in the first place. See attached screenshot for the difference in the blue/cyan colors. I don't care if the print view colors will match the print, but I do care when soft proofing is not working.
View 2 Replies
View Related
Jan 6, 2004
The colors of pictures is much darker when working in photoshop than when I open it normally. And vice versa, I work on images inside photoshop, and I get the colors I want, but once I save it to bmp or jpg or anything else, all the colors are much lighter.
i'm using photoshop 7.
View 3 Replies
View Related
Apr 3, 2012
CDX5: Whatever color I select for fill or outline is now set as the default color for fills and outlines without expressly setting it as such. Until now when I left or right click a color with nothing selected it allowed me to set it as a default fill or outline color for graphics, artistic text, or paragraph text. It does not do that now.
Is this a "feature" that's been added that I somehow enabled? In any event, how do I turn it off?
View 2 Replies
View Related
May 8, 2012
We are working with a company that will be sending us DWG files. They do not use the same layer colors as us and I am trying to find a lisp that would allow me to set up a table with the layer names and the color I want them to be so that I can quickly change all the layers to our companys color standards.
Example:
Layer 1 = Color 1
Layer 2 = Color 15
Layer 3 = Color 10
Etc.
I don't know a lot about lisp but I figure if I could find a lisp that did this I could plug in my layer/color assignments and it would work.Â
View 9 Replies
View Related
Mar 21, 2013
Using CS6 on a MacBookPro Is there a way to find the closest matching Pantone spot colors to the cmyk colors I've created in Illustrator? I know it's easy in Photoshop using the color picker, but there must be a way to do this in Illustrator.
View 4 Replies
View Related
Dec 7, 2013
You can see in the attached screen cap that colors 1-9 appear as white on my screen and that colors 10-22 are not correct either. This is only occuring in one specific drawing. Is there a preference that I switched somewhere that would make this happen? I have double checked that everything is ByLayer or ByColor that I can think of. If I insert this color chart into other drawings it looks fine. using C3D 2012.Â
I would just restart my drawing, however it is the new company template file that I have invested many hours into and would really like to be able to keep working with it and not start over. Or is there a good way to import and overwrite all the Prospector settings into a blank drawing?
View 4 Replies
View Related
Dec 7, 2013
You can see in the attached screen cap that colors 1-9 appear as white on my screen and that colors 10-22 are not correct either. This is only occuring in one specific drawing. Is there a preference that I switched somewhere that would make this happen? I have double checked that everything is ByLayer or ByColor that I can think of. If I insert this color chart into other drawings it looks fine. using C3D 2012.
I would just restart my drawing, however it is the new company template file that I have invested many hours into and would really like to be able to keep working with it and not start over. Or is there a good way to import and overwrite all the Prospector settings into a blank drawing?
View 3 Replies
View Related
Aug 6, 2009
I'm having trouble selecting an image on Photoshop 7. I'm trying to crop an image but when I use the marquee tool, it keeps jumping to different spots when I drag the corner. I recently had troubles with my computer mouse in that it was double-clicking faster than humanly possible and wouldn't allow me to highlight anything. I believe I have fixed the mouse problems because everything that I was having difficulty with before has been fixed - just not in Photoshop. I was wondering if it could be a problem with the program. I hadn't encountered this problem before anything was wrong with my mouse. As for the settings I'm using, feather is set to 0px and the style is normal.
View 6 Replies
View Related
May 25, 2012
I'm still having no luck with Refine Edge / Mask (CS5 & Win 7).
Following a tutorial at[URL]....
I come unstuck right after clicking on the Add Mask icon. In the tutorial the mask appears with a black/white checkered edge. As the commentary says, "You can tell when the mask is selected by the dotted border."
Well no matter what I do I do not get that dotted border, not when I click on the mask, double click, right click. (Nor do I get the checkered border when I click on the Layer icon. Both the layer and mask have plain white borders.)
I can't get to a Refine Mask option, only Refine Edge. When I try to improve the selection it looks as though I'm using an eraser tool at about 20% opacity, it just gets steadily more transparent. So how do I get the mask selected?
View 4 Replies
View Related
Sep 1, 2011
Usually when I want to work on a different layer, I will select the layer in the layers panel first, or alternatively hold down ctrl and left click on the image in my actual design that's on the layer I wish to change to. However I must have done "something" because now no matter what layer I am on, if I click on a part of my design that's on a different layer to which I am working on, it will automatically select this image and change to this layer. This is highly annoying because every time I am trying to edit something or move something around I suddenly find I am on a different layer again!
I'm not sure how I did this or how to change it back. When I started this design a few days ago it was working normally.
View 2 Replies
View Related
Nov 11, 2004
I can't get Ctrl + Alt + ~ keyboard short cut to work which selects the highlights in an image. The problem is that on my keyboard I have to press Alt Gr to make ~ so can't use Ctrl + Alt + ~ . How can I change the short cut? I know that you can select the highlights by "Select -> Color Range.. -> Highlights" but the result is not as soft as with the short cut. Are there any other ways to select the highlights?
View 3 Replies
View Related
Mar 13, 2007
I have three areas in an image that I want to select. Using the magnetic lasso, I select one, then when I move to the other one, the first selection disappears. How can I keep the first one and move on to two others?
View 1 Replies
View Related
Oct 1, 2004
I have this picture, of course a jpeg, so the quality sucks, and i'm having problems selecting the two girls' hair. It blends into the background to where i almost have an impossible time seeing it at all but if i just cut it out it doesn't look natural anymore.
View 7 Replies
View Related
May 4, 2006
How do i select only a certain layer's and merge or group them together? I though it would be something like... Ctrl + G or etc.
View 4 Replies
View Related
Dec 18, 2006
I edited a .jpeg in Photoshop, and removed the baground. I have a picture of a snowflake. It is on a blue rectangular background. I ONLY ant the snowflake in Publisher, so I edited the picture in Photoshop and now I have JUST the snowflake with softened edges in Photoshop. But when I go to paste it into Publishe, I always get an image with a white rectagular background, which defeats the purpose of the editing in the first place.. How do I get JUST the snowflake layer to paste into the flyer?
View 3 Replies
View Related
Sep 26, 2005
I have been creating an image in PS CS with the pen. Now I have added a new part to the picture by making a new path, selecting it and transforming it into a parth of the layer that allready existed. The strangest thing happens:
I can't select the original pic I created, it only selects the whole image. I can select the parts that I just added to the pic but I can't fill it with colour?
View 9 Replies
View Related
Mar 7, 2005
i have a black image on a white background. i want to copy the image only to another image without the background. how do i do it with photoshop 7?
View 2 Replies
View Related
Oct 16, 2005
I have CS 2 at work and home...at work I can select multiple layers by holding down shift and clicking the mouse..and I can link them in the layer pallette but on CS2 at home I cannot do this..
View 9 Replies
View Related
Sep 5, 2008
I've been having issues selecting my layers in CS2. The first thing I noticed is that i'm not able to select more than one unless I put them in a folder. The second issue, new tonight as far as i can tell, happens when i'm selecting a layer in the image by clicking on the graphic and and it doesn't select the one i'm on but rather a layer that is turned off in a folder above. Does anyone know if there is something i can do to reset my layer properties?
View 1 Replies
View Related
Oct 25, 2005
if you paint bucketed a layer flat, then drew into it with eraser, revealing the transparent background, is there any way to quickly select the untransparent parts?
View 2 Replies
View Related
Jun 30, 2009
Is there any way to select pixels
based on transparency? For example, can I select all the pixels in an image that
are 50% transparent? I was surprised that I can't find a way to do this. I can't
even find any readout or anything that indicates the transparency of a given pixel,
or any recognition of transparency at all.
I am using CS3.
View 1 Replies
View Related
Nov 11, 2004
I can't get Ctrl + Alt + ~ keyboard short cut to work which selects the highlights in an image. The problem is that on my keyboard I have to press Alt Gr to make ~ so can't use Ctrl + Alt + ~ . How can I change the short cut? I know that you can select the highlights by "Select -> Color Range.. -> Highlights" but the result is not as soft as with the short cut. Are there any other ways to select the highlights?
View 5 Replies
View Related
May 4, 2008
I used to be able to select a layer by clicking on the layer in the image. Now I have to click on it in the layers palette. How do I correct this.
View 3 Replies
View Related
