I understand the technique for changing colors of an object (New Adjustment level | Hue and Saturation). The question I have is I am trying to change a t-shirt color from Blue to a white color. I have used all the adjustments and cannot get close to white.
View 2 RepliesAdobe CS4 prints blue when it comes to white objects in the photo. Any ideas
why? This doses not happen in non-Adobe programs.
I have about 200 pictures that have a white background that I need to change to blue. Normally I would use the wand, crop it with the pen or do a color selection. The only one that is working is the pen but it is taken way to long and was hoping someone would know on a better faster way to change the white background to blue and possibly even making it a action so it wouldn't take that long.
View 2 Replies View RelatedOk so i have this image (Attached) im trying to remove the blue rectangle and the white rectangle leaving the blue swirl on the white back ground, iv tried using content aware but it comes out really bad, maybe im doing it wrong will some one be able to look at this for me, maybe it came out wrong because i have the blue swirl and content aware doesn't work correctly with it .
View 7 Replies View Relatedi have 1000 eps files to work with and i dont have the time to go to each one and change the color from blue to black! all are different shapes so i need a batch command that will keep the white, white and change any other color to black!
View 1 Replies View RelatedI'm running Windows 7 64Bit running Adobe CS5 Master Collection. But ever since I allowed CS5 Photoshop to control my printer (HP Photosmart Prem 310-C) to do a test print of a graphic that I created all of my Blues print a violet/blue color, no matter what color blue. It has even affected MS Word & MS Project when I try to print blue colored font or Gantt Chart blues will no longer print blue, but will print the same blue/violet color. I've even tried a brilliant blue which will all view great, but prints the same shade of violet blue! All my colors and Blues will view great! I've calibrated my monitor and I've reset my printer several times and still the same thing! I never had this problem before I downloaded Adobe CS5! A strange thing is that I can run check printer test and the data & image that is stored in the printer will print blues perfect, including running a copy direct from the scanner bed and it will produce perfect blues. I almost feel as though Adobe CS5 has possessed my PC and printer, how do I get it back to printing like it did before installing CS5 Master Suite?
View 2 Replies View RelatedIs there some kind of tweak I can do so that when I scan in full color, the white paper scans as white, not light blue or yellow?
View 6 Replies View RelatedI'm using PSE8. I was using Filter>Render>Clouds and it was working for me. I must have done something because the clouds that are rendered are black & white not Blue and white. My photo is of course a color image. How I can correct this or what I need to do to get back to the default setting that will render blue & white instead of black and white?
View 2 Replies View Relatedfor years I used Epson r1800 on printer management it usually matches the monitor image quite well I had not had any success using adobe color mgmt in the past
the images I am printing are sRGB and now they don't match at all they are too dark and cool (bluish) If I change the monitor to the match the printer then all of my files will look bad on screen changing the printer setting did not seem to change the actual prints
Photoshop CS3
My whites and light grays seem blue. For example, if I create a gradient from white to black, the lighter grays, will seem bluish. (See link)
It's not my monitor or color settings because when I save the images, they export in the correct shade of gray. (See link)
Also, the canvas itself doesn't come up blue. It remains white, like it should. The blues occur in shades of gray such as e6e6e6,
I just updated my Catalyst to 13.1 and now here is how some of my blues look like: [URL].... how to fix this besides rolling back the driver?
View 7 Replies View RelatedI've just used the align layers feature to stitch together 4 pics into a panorama view. It looks great except the sky is different shades of blue for each of the stiched elements.
Is there an easy way of somehow merging the different blues so you end up with a consistent blue across the panoramic view?
How can I measure the density of Red and Blue colors of an image?
View 4 Replies View RelatedI need to change all of the pure white in a picture to a very slight offwhite, since a program I'm using interperates pure white as clear.
Is there any way to select all of a certain color in a selected region and turn it offwhite?
You can see in the attached screen cap that colors 1-9 appear as white on my screen and that colors 10-22 are not correct either. This is only occuring in one specific drawing. Is there a preference that I switched somewhere that would make this happen? I have double checked that everything is ByLayer or ByColor that I can think of. If I insert this color chart into other drawings it looks fine. using C3D 2012.
I would just restart my drawing, however it is the new company template file that I have invested many hours into and would really like to be able to keep working with it and not start over. Or is there a good way to import and overwrite all the Prospector settings into a blank drawing?
You can see in the attached screen cap that colors 1-9 appear as white on my screen and that colors 10-22 are not correct either. This is only occuring in one specific drawing. Is there a preference that I switched somewhere that would make this happen? I have double checked that everything is ByLayer or ByColor that I can think of. If I insert this color chart into other drawings it looks fine. using C3D 2012.
I would just restart my drawing, however it is the new company template file that I have invested many hours into and would really like to be able to keep working with it and not start over. Or is there a good way to import and overwrite all the Prospector settings into a blank drawing?
How do I make the blue areas white? I rotated a black and white line art and solid (background) blue areas appeared. (CS3 on XP)
View 10 Replies View Relatedhow do i make the blue background to be white???why is the background is in blue. Can this be done by photoshop?
View 4 Replies View RelatedI'd like to change the white background to sky blue, to the left of the woodpecker in this photo I took.
I've been trying selections and then refining the edge with various settings. I've tried a selection with the barely recognizable branch on the bottom left and without the branch in the selection.
Once I have a selection with a refined edge I've been using Image>Adjustments>Saturation to change the color with the Colorize option checked on.
I can't get the white background to light blue without making it obvious. The blue sky and edge of the tree just doesn't look right (I forgot the term).
Would anyone have some advice on how to change the white background to a natural blue sky color and have it merge well with the bark edge? Removing the left bottom branch from the photo would be fine.
I attached the full photo scaled down to 500x375 and a larger section of the left hand side.
I was mid-project when I realized my greys had mysteriously become tinted blue. I then continued messing with every color setting I could find, but nothing worked. And I'm sure it's not a display issue, because my other projects appear just fine. My whites are now (3,0,0,0), in both the document and swatches.
View 6 Replies View RelatedIs there some good way to do this when there are subjects that have many small features, sure as leaves or bird feathers? I have tried different selection methods and feathering, but always wind up with halos or sudden changes at the boundary, that necessite huge amount of detail work to get rid of,
View 27 Replies View RelatedLooking for a fix to blue tinted black and white images with my hp color laser.
I'm not sure if the problem is with the laser printer or with photoshop.
Have great pic of Christ Of The Andes. Huge statue in foreground (gray color), and all white sky in background because of overcast day. I want to change the sky color from white to blue. Formerly, in Elements 4, I could do it easily with the Magic Wand tool. I recently upgraded to Elements 11 and, to my shock, find there is no Magic Wand tool. I am running Windows 7. I tried the Brush tool and, while it selects the correct area, I can't get it to insert the blue color. It is not a choice of color offered. Only gray. I also tried via a new layer, but could not get that to work either.
View 5 Replies View RelatedWhen I go to open photos - they are opening in blue-green-purple colors as if a filter is being applied. The color pallette is also appearing with the same blue-purple colors. In the layers pallette - the icon of the image appears in the normal colors and no filters, etc. have been applied. It's all starting from when selecting the photo to be opened in photoshop.
View 1 Replies View RelatedI have this photo taken in tungsten light, but there remain reflections from the outside light (the sun) which of course appear blue-magentish.
I thought maybe mixing with yellow-green could eliminate them. Actually I only need to decrease their saturation and thus become like other whitish reflections..
How can I delete a blue sky and white clouds in the background of a picture? I am using Adobe Photoshop CS6.
View 13 Replies View RelatedI want to take a blue color and make some monochromatic colors out of it.
1. I know how to add white/black through the brightness value in the color picker, though how do you add gray?
2. Are there some guidelines to how much white, black and gray you add to a color (in this case blue)or do you just pick any amount you like?
i always use corel for designing an advertorial matter, but there's always something that bothering me when i get the print results.. why does the colors especially blue and green always looks so dark, infact, they became brown and purple..
View 1 Replies View RelatedI`m trying to get a number the color "White" on top of a Blue color.I can get all colors to work except the color "White"...
View 8 Replies View RelatedI have a strange blue line with a white border that isn't part of any layer that won't go away, and its thickness scales with zoom. What is it, what is it used for, and how do I get rid of it?
View 1 Replies View RelatedI have this Image: [URL]......
I am trying to keep the same image, but change the green hues to blue hues. I am fairly positive I can recreate the bottom part of the image (the rectangle with rounded edges aka a button), but I don't know how to add the top parts after that. Ideally I would just like to be able to change the greens to blues.