T Text on a new layer. Happens and I can't pinpoint it but I sometimes can't reselect the text, it just adds a new layer. I end up deleting that layer that I can't re-select. I try clicking everywhere on the text and sometimes I can't get it.
View 2 RepliesIn Quick Select command function, I want to use more properties value to select one type text or other object.
View 9 Replies View RelatedAny way to turn off the ghost text that appears when you select text that is annotative, not get rid of it just not show all of the other scales for clarity.
View 6 Replies View Relatedthis code is used to fix specific font but its problem that it will prompt you to select single text
i need to make it to select multiple text so it saves me a lot of time,
;;; Process Individual request
(defun cht_ProcessIndividual ()
(setq sslen (sslength sset))
(while (> sslen 0)
(setq temp (ssname sset (setq sslen (1- sslen))))
[Code]...
Using: Xara Photo & Graphic Design 6
AMD Athlon II X2 255 Processor 3.10 GHz
2.00GB (1.75 GB usable) RAM
64-bit OS
I follow the tutorial in the Xara Help, but cannot get the results shown. I draw the circle, compose the text, and set it to the middle Select both circle and text Arrange/Fit Text to Curve....the text appears around the lower, right side of the cirle After all this I am unable to manipulate the text (It's a piece of cake to do this in Publisher 2010, but it has some minor problems in appearance)
I have a next text layer in which I cannot select the text. It Click on it and always get a new layer.
View 5 Replies View Relatedwhen i get to step 9 where it says ctrl+click to select the layer and then use the gradient tool, whenever I ctrl+click the layer and use the gradient tool, it puts a gradient on the background, my text never gets selected with one of those borders around it that usually means somethings selected, the dotted line borders...i've been trying for about a half hour and i'm pretty frustrated because all I want to do is apply a gradient to text, not the box, not the background, just the text..
View 2 Replies View Relatedhow to select the text so I can begin the filter part. I tried what he said about right clicking the layer pallette and rasterizing but for some reason it won't put the selection around the text. What am i doing wrong? Any quicky shortcut on the keyboard to select it?
ps I'm using PS 7
when i select a text message an invert it, the whole picture gets inverted - waht am I doing wrong?
View 2 Replies View RelatedI am using 2007 and cannot seem to select some text items. Happens in mt and dt in existing drawings.
View 9 Replies View RelatedHow to rotate text did not work. Why would two people want to chime in with inaccurate information. The first said you go to Layers and then Rotate. All this does is rotate the entire picture not just your text. Then the other said to lasso it and right click it while you drag it either way. No such thing exists. Nothing rotates with these methods. I am not even sure there is a way to select the text?
How to rotate text? I need it for a quick logo. I have the logo saying Travel Articles and wanted the .com next to it but at a right angle. Just works well with the pic.
I have been having a problem selecting objects in Illustrator. I am only able to select boxes and type by clicking directly on the path with both the selection and direct selection tool. Normally I can select text by clicking anywhere on it. I have checked my selection preferences and have the "Object Selection by Path Only" box turned off.
View 6 Replies View RelatedI'm trying to write an automated script that will clean up some drawings for me. I've figured most of it out, just need a command that will let me select all the text and mtext that is a certain style. Then need to be able to select all text on certain layers.
View 1 Replies View RelatedI'm trying to select all Text-based items (Text,Mtext and Attribute References) in a drawing to check to see if they match a pattern in a regular expression. Although i have a block with an attribute in the drawing and the selection filter consisting of
DxfCode.Operator, "<OR"
DxfCode.Start "ATTRIB"
DxfCode.Start "TEXT"
DxfCode.Start "MTEXT"
DxfCode.Operator, "OR>"
It isn't picking up the attribute Reference in the block.
Is there a workaround using the Editor.SelectAll method and not having to programmatically check each block's attributes? I'm using AutoCAD 2009.
Do you have a macro or Diesel command that would select all text or dimensions in a drawing and delete it automatically. I've seen an LISP command, but I know from a fact that it does not work on LT. By the way, I'm using Autocad LT 2014.
View 2 Replies View RelatedIs there a filter that can select all text in a drawing? Need to create macro (on LT so no lisp)
View 2 Replies View RelatedWhen I hit (t), i click anywhere and start to type but nothing shows up. its a blinking dot. Even if i make a text box, nothing will show up not even a blinking cursor.
View 1 Replies View RelatedI have an SVG file with text inside, if I open the file in the browser I can select the text, but when I import the file to Edge Animate and then exported as html I lose the ability to select the text with the web browser.
View 1 Replies View RelatedI have a circle which is blended.
In the circle is some text, rounded - not circle text, it is placed on top rather than typed in the circle directly.
I need to edit the text and it won't let me select it! No matter how far I zoom in to make sure I'm clicking the text, the circle gets selected and the blend tool opens.
They are not grouped or anything. This has happened before many times and with much persistance I get there eventually - but is there a much faster way?
I would like to have a macro to select all the text in a document (independently if it is in a group or ungrouped), and change its font to another one.
I have tried to record a macro by myself, but appear a text that says that these functions could not be recorded.
I want to select my text and change the size from my macro. As of now if i preselect the size it outputs the size once i type the text in box and add to page, but i cannot change the size by selecting the text. Im building this off of my output settings.
Sub ChangeSize ()Dim OriginalSelection as S,
text as StringDim txtShape as ShapeOn Error Resume NextOriginalSelection = (ComboFontSize.text, "pt", "")size = CInt(text)Set textShape = ActiveLayer.CreateArtisticText(ActiveLayer.Page.CenterX, 8, FontText.text,
cdrLanguageNone,
cdrCharSetMixed, Me.lstFonts.text, size)
End Sub
I have different annotative dimension on my drawing, when I select one all others dimension show up as you can see on the picture (260 three times ). Is there any solution to select dimension or text without showing other scale?
View 8 Replies View RelatedI have about forty maps created in DP6. Each of these has numerous pieces of text within it. These include title, map number, descriptive notes, individual letters such as A B C, scales, map symbols etc etc. These are currently all in Arial with some parts being bolded.
My question is:
In any one map can I select all the text within that map and change the character of the font? Ie can I grab all the text and change it from arial to a serif font? Or change all the text to a different colour?
I hope it can be done. I have done a bit of experimenting but have not found a way yet.
I have a set of drawings (19) with a lot of annotations, however I have to change them according to the original text:
Example: Return Air Drive by RAR, Sump by SMP etc. How is possible to select ALL the annotation with the same text and change them for the new ones? Every time that I select by text, either the MultiText or the Multileader objects are selected correctly but I can change only one at the time. Is there anyway to do the changing process in one shot for Text or Multitext with the same contents?
Is there any way to build for example a wire list in excel and insert it into ACDLT2010 where each cell would = a different text box that i can CTRL+X CTRL+V instead of manually typing each wire number at terminals?
Also is there any way to for example to select 10 text boxes and Search & Replace. Example i have two components that are identical, but named #1 and #2 or Unit A Unit B to search and Replace #1 with #2 instead of entering each text box changing the number than going to the next?
i have a text saved in PNG is a text designed with an image.how can i select the outline in illustrator? in photoshop i need 3 click, open it, click rapid selection and click the image = done in illustrator what i have to do? i am capable only of open the file...
View 9 Replies View RelatedI know this discussion title is a bit murky, but the problem is a bit odd. I have Photoshop CS6 v13.1.2. In this version, I will activate the Select Tool, check Auto-Select: Layer, check Show Transform Controls, and then while using the Select Tool I will drag to create a rectangle to select multiple layers with content within the specified area.
Unfortunately, this action only works when I begin the selection from outside of the canvas area. If started from within the canvas area, no rectangle will appear, it will show me a measurement of my selection size, and then no layers will be selected upon release.
This cannot be working as intended right? I mean multi-select dragging cannot be intended to only work when started outside of the canvas right? Is there some way to fix this issue? Is this a bug? See the images below for more information on this issue.
I can't seem to select more than one text object at a time.....
I will select a paragraph or artistic text object, press and hold shift, and then continue selecting text objects. Nothing happens.... well, it seems to be 'thinking' but nothing ever happens until I release the shift key and then only the last object selected gets highlited.
macro that would select all text of specific color (white) and delete it from the page
View 1 Replies View RelatedIs there any chance to have Style sets applied to whole paragraphs without having to select all the text?
I'd recommend a button in the styleset list that does "Apply styleset to paragraph" (with the possibility to assign a shortcut to it).
I can select mtext in paper space to edit it. I can create a new text object and select it but I am unable to select existing mtext objects. Audit and recover does not eliminate it. Everything is at 0 elevation. The only to select it is to write block the entire drawing out. That gets sort of inconvenient. Is there a variable that is getting set like the imageframe variables that prevents me from select the text?
View 4 Replies View Related