When opening older documents, why does PS CS6 mess up my text layers when I select them? I open the .psd from CS5 in a file with many text layers, the text is correct when opeinging the file but when i click on it to edit it, data from another layer replaces the selected text!
View 9 Replies
I have created .dwg drawings in AutoCAD LT 2013 and have found that people with older versions of AutoCAD cannot open them. Is there a generic overall version of AutoCAD that I can save my drawings in that would be accessible to all versions of AutoCAD?
View 7 Replies View RelatedWhen I open an Illustrator file with many layers, nested groups, etc. I have to spend the first minute or so closing all the nested layers in the layers palette.
I've searched for a preference but can't find anything to tell Illustrator to open with all layer triangles closed. Is this possible?
So I use Photoshop a lot. I think I got CS6.Anyways. Last week I could play 3 internet files, two movies, photoshop 5 different documents and much more. However, now I can't open internet and do photoshop. I have to restart my computer to run photoshop and make sure I don't use any other program. Sometimes the file only lasts 30 minutes before it won't allow me to edit.
I have A LOT of room left on my computer. 706GB free of 907GB. I tried to clean my computer, but that didn't work. It also is saying extrusion file is curruptied or damaged.
I have installed Photoshop CS6, am running on Mac 10.6.8 and now EVERY file I open in PS opens up at 0.071%. Tried throwing away preferences, no change. Have looked over every PS forum and the net in general for ANY clue on this one.
View 2 Replies View RelatedI can't open the saved files in MAYA 2012 in older versions of MAYA i.e. in 2008,2009,2010,2011..
View 9 Replies View RelatedI need to open older vector files from 2008 (eps). They won't opem in my current apps CS5or CS6.
View 1 Replies View RelatedWhen trying to open very old Corel Files (created in 1992), I get an error message stating that the format cannot be accessed. Is there a way to convert these older files (perhaps originally made with Corel 1 or 2) with a ulitity,so that they will open in CorelDraw X3?
View 9 Replies View RelatedWhen I try to use PSPx5 to open .psp images created with older versions of PSP, I get the message that they can't be opened.
View 5 Replies View RelatedEven though I run the Dwgconvert function in DwgTrueview 2012 I still can not open the converted file in AutoCAD Mechanical 2012 SP 2. Fatal error with some hex memory addresses displayed. DwgTrueview opens and displays the dwg. just fine. AutoCAD R14 & 2000 open the file with no problem as well.
View 3 Replies View RelatedI am opening a file from 2004 and I am using AutoCAD Arch 2012. When I open the file everything is there, but the doors do not cut through the walls. The doors are still there but are not "anchored". Is there a way to fix this easily? I also lost everything out of my door schedule. I know I will get my schedule back when the doors get anchored back to the wall.
View 1 Replies View RelatedThese Application Options settings change not infrequently and for reasons that I cannot be certain of:
Sketch:
Enable Heads-up Display
Edit Dimension when created
Look at sketch...on...creation
Part:
No new sketch goes to x-y plane
This may happen after when I open parts from Inventor 2011 (maybe 2010) into 2012, then create a new part. I would expect the 2012 App Options to be the master, so I don't know why a legacy part would be allowed to change those settings.
Inventor Professional 2014
Windows 7, x64
Dual-core i7, 8GB RAM
NVIDIA Quadro FX 880M
HP Elitebook 8540w
Does anyone know how to create an action that will open a second document, select all of the layers (or layers within a group) and move/drag them back into my working document?
I have tried all kinds of combinations but only received the "...is not currently available" alert; somehow, move is not recorded.
Is there a way to merge two psd files into one? I'd like to copy a layer from an image file to another but it wont allow me to do so, so merging the 2 psd files is the only solution I can find.
View 6 Replies View RelatedWhen a client sends me drawings via email, how do I open them up/upload them to my AutoCad LT program?
View 1 Replies View RelatedWhen loading a previously saved item the preview shows the "complete job lot" however when you load the item it does not load the full drawing and is missing approx 3 hrs of work.
how to load the full document, I have tried the recovery manager which only loads the part document
Below is a picture of the preview working fine
Below is a picture of CAD not loading the full document up
Autocad 2012 not all document.jpg
Is there a way to prevent Ai CS5 from re-opening documents after a crash?
I think a specific document is causing Ai to crash, so after Ai crashes, it tries to re-open the file when I restart Ai, then it crashes again - ad infinitum!
When trying to open a coreldraw document sent to me containing fonts that I do not have, I cannot seem to open only as curves and it always wants to replace missing fonts. I am sure I could do this with X3, but not X5.
I just want to import as curves and not substitute fonts.
I noticed over the last few days that Corel was taking a while to open files. Like, if I had one open already it was usually fast enough, but if Corel wasn't open I'd get an error from the file manager I use saying it couldn't execute the program. Every time though, if I closed CorelDraw, and open a new instance of the program I'd be fine again.
Today has been different. Today I've had to restart corel practically every time I've tried to open a document. A few minutes ago I couldn't even get corel to open.
Right now where I'm at: I can open corel, I can change workspaces, but I can't open any file or even a 'new blank document' It freezes/hangs with the processing bar at about 80 %.
I'm going to try a restore point. I brag about how stable my system is, this makes no sense, I don't think it is a corel problem, I've noticed a ton of updates from Windows starting middle of last week. I just figured it would work itself out. I'll post every step I take. Oh, and by the way, I can open PhotoPaint Just fine.
I've removed update KB2853952 - Improvement only in that I can open corel, but can't open a new document or an existing document. I've done an F8 while starting up Corel Draw and reset to factory specs. No change. Deleted all 10,006 items in my temp folder. No change. System restore back to 9/10/2013 worked. Corel functions as expected.
Current System: i3 3.07ghz, 3gb ram, Windows 7 32 bit with all updates and X6
This has happened since CS5 I think. When I select an area to copy into another document, I am so used to dragging it over to the destination document. Sometimes I have more than one document open at a time and dragging over them blanks them out.
Adobe Photoshop Version: 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00) x64Operating System: Windows NTVersion: 6.2 System architecture: Intel CPU Family:6, Model:13, Stepping:7 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreadingPhysical processor count: 6Logical processor count: 12Processor speed: 3500 MHzBuilt-in memory: 16325 MBFree memory: 10453 MBMemory available to Photoshop: 14662 MBMemory used by Photoshop: 63 %Image tile size: 128KImage cache levels: 4OpenGL Drawing: Enabled.OpenGL Drawing Mode: AdvancedOpenGL Allow Normal Mode: True.OpenGL Allow Advanced Mode: True.OpenGL Allow Old GPUs: Not Detected.Video Card Vendor: NVIDIA CorporationVideo Card Renderer: GeForce GTX 690/PCIe/SSE2Display: 2Display Bounds:= top: 0, left: 1920, bottom: 1080, right: 3840 Display: 1Display Bounds:= top: 0, left: 0, bottom: 1080, right: 1920 Video Card Number: 2Video Card: NVIDIA GeForce GTX 690OpenCL UnavailableDriver Version: 7.1.542.0Driver Date: 20060522000000.000000-000Video Card Driver:
[code].....
I have a Macbook Pro ver. 10.6.8 i7 Core, 8 Gb Ram, and I am running Adobe Illustrator CS6.
I have a document that is 18" x 42" and contains drop shadows. It was created using CS6. When I apply a graphic style (gradient and drop shadow) It has a progress bar that says "Drop Shadow" and it fills up and freezes. I recreated the document, and I am having the same issue repeatedly.
In order to do what I needed, I had to ungroup the letters recieving the graphic style and apply it to each letter individually. If I try applying it to more than one object, the freeze happens again.
I saved the file I created, and now I can not open it. On load it has a progress bar that says "Drop Shadow" and it fills up and freezes.
I can open the same document in CS4 on the same system with no issues, it takes less than 5 seconds to load.
is there a preference so that I can turn off documents opening full screen?
View 4 Replies View Relatedis there anyway of opening old files from previous edition of autocad on the newer version, have a file from a few years ago and it wont open now on the new one?
View 9 Replies View RelatedI am trying to get a white layer with see through writing which reveals the background image underneath. (Almost like I have put a stencil over a photograph). I have discovered this is called a clipping mask.
However, I am having difficulty using a clipping mask over multiple text layers. It seems to only do it to one layer directly beneath. I do not want to merge the text layers as I want to mess about with the design a fair bit.
I just started using the new Indesign CC and one of the features that I miss is the blue outline that would appear around textboxes. It would allow me see where my text was and move it around. The new Indesign CC displays text, but with no outline around the text, which makes it difficult to re-adjust the box size and move around my text.
Is there a way to enable the text box outline to show when designing (not when printing) as the previous verisons of InDesign did?
I often will borrow groups and layers from one document and drag them into a new or a different PS document to borrow the layers and formatting so I am not starting over from scratch with a design that I just need to re-work into a different size.
But in the last two weeks, when I drag the layers over, they start mysteriously changing into other layers that I did not drag over. What is causing this bug? It wasn't there before as I have performed this action many times in various projects. I am using PS CS6 on a Mac Book Pro.
I would like to increase the font size in many text layers at a time by selecting them in the layers panel. The font increases, but the text boxes don't expand to fit the increased size text. So I am having to make each box bigger manually. Is there a way to have the boxes expand to fit bigger text automatically through the layers panel?
View 2 Replies View Relatedbecause the specified color book cannot be found? The file is opening without any colors and as i am trying to set the file up to print, it is VITAL that i have colors.
View 1 Replies View RelatedUsing CS 2 on Win XP
Simple question:
am trying to edit a text layer but i am unable to open the text box to change text.
It creates a new text layer everytime i click on the layer.
I am downloading Tiff images from a partners website. After extracting the file and opening from Photoshop CS5.1 it's only displaying one of the original image layers. For example and image with two guys shaking hands in an office is only opening the clipped two guys and not showing the backgroud. The vendor says the files open fine on their end which leads me to believe its a download or photoshop issue.
View 2 Replies View RelatedWhy my multi-layered psd and tif files saved with PS12 64 bit are opening flattened in PS7?
There's been some inconsistency.Initially all psd were flattened.Some tif copies i made were not...but most were still flattened when opened with PS7. Perhaps it is because i'm using the 64 bit version and my friend with PS7 is not.
