So I use Photoshop a lot. I think I got CS6.Anyways. Last week I could play 3 internet files, two movies, photoshop 5 different documents and much more. However, now I can't open internet and do photoshop. I have to restart my computer to run photoshop and make sure I don't use any other program. Sometimes the file only lasts 30 minutes before it won't allow me to edit.
Â
I have A LOT of room left on my computer. 706GB free of 907GB. I tried to clean my computer, but that didn't work. It also is saying extrusion file is curruptied or damaged.
I have installed Photoshop CS6, am running on Mac 10.6.8 and now EVERY file I open in PS opens up at 0.071%. Tried throwing away preferences, no change. Have looked over every PS forum and the net in general for ANY clue on this one.
When opening older documents, why does PS CS6 mess up my text layers when I select them? I open the .psd from CS5 in a file with many text layers, the text is correct when opeinging the file but when i click on it to edit it, data from another layer replaces the selected text!
When loading a previously saved item the preview shows the "complete job lot" however when you load the item it does not load the full drawing and is missing approx 3 hrs of work.
how to load the full document, I have tried the recovery manager which only loads the part document
Below is a picture of the preview working fine
Below is a picture of CAD not loading the full document up
Is there a way to prevent Ai CS5 from re-opening documents after a crash? Â I think a specific document is causing Ai to crash, so after Ai crashes, it tries to re-open the file when I restart Ai, then it crashes again - ad infinitum!
When trying to open a coreldraw document sent to me containing fonts that I do not have, I cannot seem to open only as curves and it always wants to replace missing fonts. I am sure I could do this with X3, but not X5.
I just want to import as curves and not substitute fonts.
I noticed over the last few days that Corel was taking a while to open files. Like, if I had one open already it was usually fast enough, but if Corel wasn't open I'd get an error from the file manager I use saying it couldn't execute the program. Every time though, if I closed CorelDraw, and open a new instance of the program I'd be fine again.
Today has been different. Today I've had to restart corel practically every time I've tried to open a document. A few minutes ago I couldn't even get corel to open.
Right now where I'm at: I can open corel, I can change workspaces, but I can't open any file or even a 'new blank document' It freezes/hangs with the processing bar at about 80 %.
I'm going to try a restore point. I brag about how stable my system is, this makes no sense, I don't think it is a corel problem, I've noticed a ton of updates from Windows starting middle of last week. I just figured it would work itself out. I'll post every step I take. Oh, and by the way, I can open PhotoPaint Just fine.
I've removed update KB2853952 - Improvement only in that I can open corel, but can't open a new document or an existing document. I've done an F8 while starting up Corel Draw and reset to factory specs. No change. Deleted all 10,006 items in my temp folder. No change. System restore back to 9/10/2013 worked. Corel functions as expected.
Current System: i3 3.07ghz, 3gb ram, Windows 7 32 bit with all updates and X6
I have created .dwg drawings in AutoCAD LT 2013 and have found that people with older versions of AutoCAD cannot open them. Is there a generic overall version of AutoCAD that I can save my drawings in that would be accessible to all versions of AutoCAD?Â
When I open an Illustrator file with many layers, nested groups, etc. I have to spend the first minute or so closing all the nested layers in the layers palette.
I've searched for a preference but can't find anything to tell Illustrator to open with all layer triangles closed. Is this possible?
I have a Macbook Pro ver. 10.6.8 i7 Core, 8 Gb Ram, and I am running Adobe Illustrator CS6. Â I have a document that is 18" x 42" and contains drop shadows. It was created using CS6. When I apply a graphic style (gradient and drop shadow) It has a progress bar that says "Drop Shadow" and it fills up and freezes. I recreated the document, and I am having the same issue repeatedly. Â In order to do what I needed, I had to ungroup the letters recieving the graphic style and apply it to each letter individually. If I try applying it to more than one object, the freeze happens again. Â I saved the file I created, and now I can not open it. On load it has a progress bar that says "Drop Shadow" and it fills up and freezes. Â I can open the same document in CS4 on the same system with no issues, it takes less than 5 seconds to load.
way of opening images in CS2 where after opening they will appear in the middle of the CS screen rather then in the top left corner? Â I can drag and maximize so they appear in the middle, but on reopening another image they default to the top left again, I would like them to always open in the middle?
I have Adobe Photoshop CS5 Extended on a MacBook Pro 15 (Late 2011) running Mac OS X 10.7.3. When I open a document in Photoshop, the document window is nowhere to be found yet it allows me to edit things within the document via double-clicking layers in the layers panel. Why does this happen and how do I fix it? Â I've tried opening multiple documents at once, using the "arrange windows" option, and changing the workspace, all to no avail. The only thing I have found is restarting the entire system each time. This isn't something I want to continue to do.
I just bought Photoshop CS5 and I can not open RAW documents with it. It happened to me the same problem with Element 8 and I managed to install CameraRaw8 on it.
I did the same manipulation and this error message show up: "Unable to use the Camera Raw plug-in"
I have some really important paperwork i need edited, dates changed. I already scanned the document. All I want to do is change some dates around and I cant seem to figure it out.
I will be photographing old blueprints that are 3'x4'(this will be the largest).
I will be getting a camera stand and I am looking at the Bogen / Manfrotto Mini Salon 190 Camera Stand which seems to be the best solution for my needs.
But my question is what lens?? I have a Sigma 20mm macro but I am concerned about the distortion around the edges (which sigma does great with trying to eliminate). The other camera I have is a canon 28-135 that has limited macro capabilities but I think some Kenko tubes might take care of that.
The lighting has me a bite perplexed as well. With the camera at a 90 degree angle I will have to make sure the light source is between the camera and the paper and not over the camera to eliminate shadows. My studio lights are too big for this and flash is supposedly a big no-no because of creating hot spots.
This feature sometimes works and sometimes doesn't. For instance I just opened two photos and tried to use Arrange Docs clicking on the side by side choice. Nothing happens. Tried this several times.
Then I hit F three times to cycle through and get back to normal view. Tried Arrange Docs side by side once again and it worked.
Shut down PS Cs4 and opened it again and brought in the same two pictures and Arrange worked right away.
But I know it will fail again as it has on many occasions in the last few days. I can't predict when it will work.
My video card does not support GPU. It's an Invidia GSX5500. Could that be the reason?
I have CS2 running on XP with a Wacom tablet. I need to copy select layers of several designs into a larger layout. I've tried to link and paste and I can't get multiple layers highlighted to link. As a work around, I've copied them and merged them and then copied and pasted the single layer -- overall not a pleasant solution.
One new feature in CS4 is 'arrange documents' and the drop down options. This works great. However when I close the open files and open some more CS4 has lost the settings I had. Is there somewhere to make it default to 'my' settings - always do the same as last settings. For example 'float all in windows' would be the default to always open new files instead of tabbed always opening first.
I recently got CS4 version of Photoshop and now I'm having a weird problem with the "Arrange Documents" navigation.When I installed PS the dropdown menu worked like it should, but suddenly without any warning it started to like this:As you can see it doesn't show any icons on the menu.. just blank dropdown. I works correctly though f.ex.
I can choose any option I want, but it's so frustrating trying to navigate as "blind". I've tried looking through the preferences about interface and so on, but haven't found help from there. Also I tried uninstalling and re-installing the hole software again. The result was that when I opened PS for the first time after re-installation it worked like it should be (I could see all the option like I should), but as I turned off the computer and opened it the next day the situation was this problem again.
I have inserted (Object) a Photoshop PDF into Word documents. The results is TERRIBLE!  I had a professional photographer photograph drawings in RAW. He gave me a DVD with TIFF images he created in Photoshop. I opened these TIFF files in Photoshop CS6, cropped, sized and rotated to landscape. I saved it as a PDF. I then opened Word (Windows 7). I inserted the Photoshop PDF. It looked terrible! Lines are missing or gray. If I print them out directly from Photoshop (not as PDF) they come out perfect. But my publisher wants everything in ONE document (Word).
I received a layered psd from a colleague. In PS, she did some simple animation to show me what she was looking for. I had planned to take the file in to after effects to do the final animation, but when I do, the animation comes in and every layer and comp has a pre-set duration that I cannot change without time remapping.  For example, there is a 'pack shot' and some text. The entire animation is about 2 seconds and 15 frames. When I import as a composition in to after effects, every layer is pre-set to 2 secods and 15 frames - even the text layers and precomps. The text layers have that out point marker like comps do - but as a still layer it normally doens't have a set out point.  In photoshop I was able to convert to a frame animation and delete the frames, ending only with where the end of the animation is, but the durations are still there...  How can I completely delete animation from a PSD so that photoshop or after effects can't even tell it was ever animated? Is there a simple "remove all animation data" command?
Mac OSX10.6.8, PS CS6Â current version (not the cloud).Just updated from CS5 to CS6. Photoshop, when I open a new doc it is scaled down to .08%, and when I use the fit to window option the document scales down to .08% view. CS5 does not do this, thought maybe I have a setting wrong in CS6, or something is new that I missed. Doesn't have anything to do with resize window pref., does it no matter if it's checked or not.
When opening and saving documents with smart objects photoshop freezes the adobe PS loader (circle dots) is replaced and the system loader (multi colored wheel of death) spins for 30 seconds or more. Â What I've tried so far based off looking at various posts. Â Photoshop Preferenes
Save in Background offMaximise PSD and PSB file compatability neverCache Tile Size: 128kAdvanced Graphic Processor Settings: Basic & NormalLayer Panel options: No Thumbnail Observations and workthroughs to date The file size and amount of smart objects effects the file expotentially i.e. The more smart objects you have the worse it getsThese files worked perfectly in PS CS5It also happens on files natively created in PS CS6The CPU is maxing out at 100% while PS loadsClosing or opening suitcase has no effect.Â
System: iMac 27-inch, Mid 2011Processor 3.4 GHz Intel Core i7Memory 16 GB 1333 MHz DDR3Graphics AMD Radeon HD 6970M 1024 MBMac OS X Lion 10.7.5 (11G63)Suitcase 4Â
I am having an issues with Photoshop becoming unresponsive. After about 10 minutes Photoshop will not open or create a document. I've disabled opengl in Photoshop with the same results. This error occurs on both CS5 and CS6 versions of Photoshop. I've tried reinstalling Photoshop (not removing and reinstalling, just reinstalling). Â Windows 7 x64 Nvidia GTX 275 v296.10 12gb DD3 Ram Adobe Photoshop CS5/CS6
I am trying to design a billboard, and I cannot save this document as a PDF to submit it for approval. What format should I build this in and what program is the best, photoshop or illustrator?
