AutoCAD LT :: Uploading / Opening Documents Sent From Outside Source?
Jul 2, 2013When a client sends me drawings via email, how do I open them up/upload them to my AutoCad LT program?
View 1 RepliesWhen a client sends me drawings via email, how do I open them up/upload them to my AutoCad LT program?
View 1 RepliesI have been struggling today with an issue I've encountered with my documents that I made in Illustrator, then had them uploaded to the web. The document displays big squares around all the paths in my document, containig text and gradients inside them.
When I open the document on my laptop, using adobe reader, it displays correctly, with no hassles, but when I upload them to the web, or even drag and drop the document in to my browser, these big squares appear. I'v etried different PDF settings to try and fix this, but it's not working and as a temporary solution, the document was uploaded as a PNG.
The document itself isn't linked to any =thing, it's just a document that opens when you click on the web button to view it, and then you can download the pdf document from the website.
When loading a previously saved item the preview shows the "complete job lot" however when you load the item it does not load the full drawing and is missing approx 3 hrs of work.
how to load the full document, I have tried the recovery manager which only loads the part document
Below is a picture of the preview working fine
Below is a picture of CAD not loading the full document up
Autocad 2012 not all document.jpg
I have created .dwg drawings in AutoCAD LT 2013 and have found that people with older versions of AutoCAD cannot open them. Is there a generic overall version of AutoCAD that I can save my drawings in that would be accessible to all versions of AutoCAD?
View 7 Replies View RelatedSo I use Photoshop a lot. I think I got CS6.Anyways. Last week I could play 3 internet files, two movies, photoshop 5 different documents and much more. However, now I can't open internet and do photoshop. I have to restart my computer to run photoshop and make sure I don't use any other program. Sometimes the file only lasts 30 minutes before it won't allow me to edit.
I have A LOT of room left on my computer. 706GB free of 907GB. I tried to clean my computer, but that didn't work. It also is saying extrusion file is curruptied or damaged.
I have installed Photoshop CS6, am running on Mac 10.6.8 and now EVERY file I open in PS opens up at 0.071%. Tried throwing away preferences, no change. Have looked over every PS forum and the net in general for ANY clue on this one.
View 2 Replies View RelatedIs there a way to prevent Ai CS5 from re-opening documents after a crash?
I think a specific document is causing Ai to crash, so after Ai crashes, it tries to re-open the file when I restart Ai, then it crashes again - ad infinitum!
When opening older documents, why does PS CS6 mess up my text layers when I select them? I open the .psd from CS5 in a file with many text layers, the text is correct when opeinging the file but when i click on it to edit it, data from another layer replaces the selected text!
View 9 Replies View RelatedWhen trying to open a coreldraw document sent to me containing fonts that I do not have, I cannot seem to open only as curves and it always wants to replace missing fonts. I am sure I could do this with X3, but not X5.
I just want to import as curves and not substitute fonts.
I noticed over the last few days that Corel was taking a while to open files. Like, if I had one open already it was usually fast enough, but if Corel wasn't open I'd get an error from the file manager I use saying it couldn't execute the program. Every time though, if I closed CorelDraw, and open a new instance of the program I'd be fine again.
Today has been different. Today I've had to restart corel practically every time I've tried to open a document. A few minutes ago I couldn't even get corel to open.
Right now where I'm at: I can open corel, I can change workspaces, but I can't open any file or even a 'new blank document' It freezes/hangs with the processing bar at about 80 %.
I'm going to try a restore point. I brag about how stable my system is, this makes no sense, I don't think it is a corel problem, I've noticed a ton of updates from Windows starting middle of last week. I just figured it would work itself out. I'll post every step I take. Oh, and by the way, I can open PhotoPaint Just fine.
I've removed update KB2853952 - Improvement only in that I can open corel, but can't open a new document or an existing document. I've done an F8 while starting up Corel Draw and reset to factory specs. No change. Deleted all 10,006 items in my temp folder. No change. System restore back to 9/10/2013 worked. Corel functions as expected.
Current System: i3 3.07ghz, 3gb ram, Windows 7 32 bit with all updates and X6
When I open an Illustrator file with many layers, nested groups, etc. I have to spend the first minute or so closing all the nested layers in the layers palette.
I've searched for a preference but can't find anything to tell Illustrator to open with all layer triangles closed. Is this possible?
I have a Macbook Pro ver. 10.6.8 i7 Core, 8 Gb Ram, and I am running Adobe Illustrator CS6.
I have a document that is 18" x 42" and contains drop shadows. It was created using CS6. When I apply a graphic style (gradient and drop shadow) It has a progress bar that says "Drop Shadow" and it fills up and freezes. I recreated the document, and I am having the same issue repeatedly.
In order to do what I needed, I had to ungroup the letters recieving the graphic style and apply it to each letter individually. If I try applying it to more than one object, the freeze happens again.
I saved the file I created, and now I can not open it. On load it has a progress bar that says "Drop Shadow" and it fills up and freezes.
I can open the same document in CS4 on the same system with no issues, it takes less than 5 seconds to load.
is there a preference so that I can turn off documents opening full screen?
View 4 Replies View RelatedI need to copy a layer from one drawing to another, the problem is that one of them is in model and the other one is in paper. The method I tried using was: I used the q select command to copy all objects from one layer on to the clipboard and then tried pasting it in the other drawing (which was in paper) - and nothing got pasted.
View 3 Replies View RelatedI have AutoCAD 2011. A previous employee of this company made a dwg that had a road map overlaid with some polygons representing areas of this or that. The road map was made of lines, polylines, etc. As I hovered the mouse over the roads they highlighted as if to be edited. My co-worker insisted that there was no way he drew the map and must have uploaded it.
The reason I am asking is a current project we have has many maps available as pdfs and other formats. I know how to upload a pdf as a back drop but do not know how I can upload anything not a dwg that can be edited or changed.
Having issues uploading dwfx files to the 360 cloud?
We have a couple of files that were created from Inventor 2013 as dwfx and when we upload them to the cloud they will not display correctly.
They will display correctly in Design Review on my local system.
I have an architects drawing that was sent to me as a DWG and I am trying to save it as a R12 DXF for uploading to a pocketGIS application on a PDA.
When I try to save the file I get an pop up message that reads "This drawing contains custom objects that are not supported in previous versions. These objects cannot be saved to a previous version etc. etc." When I close this message the drawing saves anyway. However when I try to open it as a DXF in Autocad 2010 I get the following error message "Unloadable shape/text file
Invalid or incomplete DXF input -- drawing discarded." and needless to say I am unable to load it on the PDA.
I would like to bring in some of our linework into WS so it can be viewed on an iPad or smartphone with the GPS location referenced to the linework. Our dwg files projection is set for the NAD83 California Coordinate System, Zone 6, US survey feet.
Does the line work need to be projected before uploading to WS to use the GPS correctly? I understand there is also a units issue...but for some reason the location is never where it should be.
Trying to upload pdf to vista print got error make sure all fonts are embedded or converted to outlines and reload Have no clue ??
View 3 Replies View RelatedI have received some files from our external design office with the extension .nwc and .dgn (software: Autodesk Naviswork) and I cannot used it in my Autodesk Inventor Professional 2011 (Error: "Failed to open document"). They cannot export in step file or others which can be useful for me.
There are two Autodesk softwares and we cannot use data in both?
I am using AutoCAD 2012 and the .NET API. How can i loop through the document objects of all the open documents? i am trying to do something like the code below..
public void GetDocNames() {
DocumentCollection docs = Application.DocumentManager;
for (int i = 0; i < docs.Count; i++) {
AcadDocument doc = docs[i];
Debug.Print(doc.Name);
} }
I am having a problem uploading a photo in photoshop cs6
View 2 Replies View RelatedI been trying to Upload a video to YouTube and it keep messing with the sound every time or the video would be all choppy. Is it Corel VideoStudio Pro X5 or YouTube messing with the video. I am using the up-loader that is installed in the program . it used to work but now it mess up a lot of times.
View 1 Replies View RelatedJust upgraded from CS3 to CS4. In CS3 I was able to upload directly from Bridge to my smugmug account. I can't seem to find in CS4 bridge that option. What am I missing?
View 1 Replies View RelatedI've created a webpage in phtoshop, done my rollovers in image ready and transferred it into dreamweaver.
Now when it's on my hard drive it's fine and works - but when i upload it none on the images show up or they do show but when you put your cursor over a rollover all the images diassapear (they all turn to red crosses).
I just got a new D5, and unloaded the provided software. I'm confused about getting the images into Bridge? I don't want to use the Canon software for any processing, just uploading. Can I store the RAW images, or do I need to convert them so something else?
View 4 Replies View RelatedI have created a photoshop web gallery using bridge. I see the thumbs, pages,photos.js and photos.xml file in my folder. I'm using Dreamweaver to creat my webpages. How do I get the gallery viewable or seen on my website.
View 2 Replies View RelatedI've Tried just about everything .. but, they still comming out unclear and blurry.... i tried everything on "save to web" and I even tried "Save As"... Do Yall think it can be my color settings or just my computer?
View 1 Replies View RelatedI've received some new brush sets free with a magazine. Can anyone tell me how I upload them to be used within the Photoshop CS3. Fonts are placed in the C: drive Fonts file for Illustrator purposes. I can't find a similar folder to put the brushes in?
View 5 Replies View RelatedWhere can i upload .PDN images?
View 2 Replies View RelatedI created a gif with gimp gap. I saved it. I checked it on quick time, it plays. But when I tried to load it on tumblr it wouldnt load. Its not over the mg limit. Itll load but not play animation {?}
View 5 Replies View Related