in Photoshop Extended (CS6), when I set a custom measurement scale and save/close the file, the scale information is not retained after the file is reopenend. I have experimented with both .psd and .tif files. I used to be able to do this in CS3 without any trouble!
View 2 RepliesI'm trying to set the scale of my picture in CS6 but everytime I got to analysis -- set measurement scale I can't select it! I need it to make scale bars on my fluorescent pics so I can finish my thesis. I have CS6 (64x) from creative suite 6 design standard that I got from my school. The picture is .tiff file 24 bit
View 6 Replies View RelatedI have created a custom measurement tool to measure distances (captured from sattelite imagery, and using the distance key as the guide) and it works great. However, I would like to be able to use the same tool to measure curves/radiuses. Say for instance a mountain road. I know the scale of the photo, and can measure any straight (line) angle, but can I do the same for a curve or radius using the same scale?
View 6 Replies View RelatedI have a drawing and when I measure the width of a window it says 30.9, when it is supposed to be 1100mm. Is it possible to change the scale so that the measurement is correct?
View 8 Replies View RelatedI am taking measurements of a large site plan for a report. However, after I save and exit the image, it clears the measurement log. In other words, after saving and exiting, and then reopening the image, the measurement log is clear. I can save the measurement log as a text file, but when I reopen the image, the data isn't there and I cannot find a way to link it back to the image. Is there a way to save the data with the image?
I am using CS4 Extended on Windows 8.
Is there a way to save a custom artboard setup with a custom document profile in illustrator cs5? I do technical illustrations and our page size is odd (7.19 x 8.96. It the size that our Framemaker layout is set to.). I have a custom document profile that I use, but I use the grids all the time so that my callouts are spaced out evenly around the art. I would like to have a way to set the artboard up so that the grid will align to the center of the artboard everytime I turn them on. Right now they always start from the top left and when I center art in the center of the page, the grid spacing isn't the same on each side of the art. I just want to be able to open my document profile, turn on my grids, have them start from the center, and I can get down to business. As it is now I have to go into my artboard settings and manually adjust the grid to the center. Small annoyance, but it still annoys me. I have tried to save it a few different ways, but nothing has worked. Maybe there just isn't a way.
View 4 Replies View RelatedI am creating a scale model for a laser cutter using 1/4" mdf. So my drawing needs to be 1/4". How do we change the Revit custom scale to 1"=1/4" OR 1/4" = 1/4"?
View 1 Replies View RelatedIn 2012, when I click on a viewport and try and to change the scale, in either quick properties or the properties window custom scale. AutoCAD only allows the standard scale settings, not a custom one. I think this is just a matter of some setting, but do not recall it.
View 5 Replies View RelatedIn AutoCAD, I can go on the tray menu and select the scale list and select custon scales. I get the entire list I created and able to make and delete scales.
When I do the exact same thing in AutoCAD Civil 3D, it freezes up and won't let me do anyting, I then hit esc and I can start working in the drawing again.
what is going on in AutoCAD Civil 3D?
I'm using mm, and i want to create a custom scale which is not in the list of my standard scale in the viewport properties. If i want 1/200 for example and this is not in the list how do i set the custom scale?
View 4 Replies View RelatedPS CC won't save a custom workspace. Nothing happens. In addition, I get a "Can't apply workspace because of a system error" when i try to view the What's New workspace. Just downloaded the CC today. Mac 10.7.5, 3.4 GHz processor, 16GB RAM.
View 3 Replies View RelatedHow do you go about saving a custom color profile in CS6? Gone is the save button after you have created the custom profile. In my case I want to save a custom Adobe RGB profile with a gamma of 1.0 instead of the usual 2.2. I can create it easy enough in the custom dialog box, but haven't figured out how to save it.
View 2 Replies View RelatedIs it possible to create a custom stroke that doesn't scale to the length of the line you assign it to? I am trying to create a stroke that looks like a chain but when I create a custom brush, I have to almost create the brush pattern the same length as the stoke it gets applied to in order to avoid the chain links bunching up or being grossly stretched out along the assigned path.
Is there a setting or some other function that can accomplish this? Is there an easy way to assign a shape to along a path other than blend?
In the end I want to be able to assign a premade pattern to a line without that pattern being distorted or scaled along the path it is assigned to.
I have a problem that I cannot seem to solve. I have a drawings with a whole bunch of layout tabs that have a few viewports in each tab. One of these viewports on each layout tab is on the layer VIEWPORT. I did this so it would be easy to filter out the other viewports in the drawings. I am using the code below to change all of the viewports with the layer VIEWPORT to the Custom Scale 0.020833. This works for all of the layout tabs except the first tab. It will not for some odd reason work on the fist tab.
(setq vieportfilter (list (cons 0 "VIEWPORT")))
(setq ssetvp (ssget "x" vieportfilter))
(setq cntrp 0)
(while (< cntrp (sslength ssetvp))
[code]..........
I have changed the crop shortcut to ctrl + >, and it works fine until i restart!when i check the shortcut i previously changed, it is now ctrl+&???Why?????I used to have this same shortcuts since cs4.(PS 64bits, latin keyboard)
View 6 Replies View RelatedUsing PSE 11, I get the panels set up the way I want, and the background that shows behind the document white like I want, and all is well. Until the comptuer loses it and I have to redo it all over. How can I get it to save my choices for these things? It also lost all my preferences that I set.
View 7 Replies View RelatedI have just created an effect I want to apply to other images. How to I save this effect as a preset, so I can apply this to my other images?
View 10 Replies View RelatedI'm trying to see if there is a shortcut or way to save my images to the size I want on the SAVE FOR WEB feature
For faster downloads I like to shrink my images to to 800 X 600 - so once I'm done editing them I hit "Save for Web" and then input those figures manually.
Now is there a way to program my Save for Web command so the images are automatically resized to 800 X 600 ? This would save me one step and speed up my work.
I'm using MassFx in 2013 64bit. When I apply any rigid body modifier to an object it looks fine but after I save and reload the .max file the scale & position of the rigid body is wrong. This seems random, I've tried switching to CM and Meters etc, nothing seems to fix it.
View 1 Replies View RelatedExample this is my custom toolbar.
And how i can save this and export to another computer... i use autoCAD 2007 .
how to save a custom workspace in previous versions does not exist in Illustrator CC. Has this option been reconfigured or simply forgotten? I'm using a Trial Version.
View 13 Replies View RelatedIs there a way to save an idw sheet to FULL SCALE dwg drg, so that all the views are full scale and also maintain all dimensions and annotations in one uniform scale?
I need to do this for the flat patterns that go to the steel mill to get laser cut, and they want all the pertinent info accompanying the view/part-profile.
IV 2010 Suite
Digital Storm PC:
EVGA & Intel components
Win 7 Pro 64 bit
I have never figured out a way to save my customized Modifier Sets. Whenever I have to reinstall Max or we get a new release I lose a lot of customization. I'd like to be able to save every singe interface tweak to make to carry forward to new releases.
3ds Max Design (3D Studio thru Max 2014), ASUS P9X79 Motherboard,
Intel i7-3960x, Hydro H80 CPU Chiller, 32GB DDR3 Ram,
Quadro 4000 Display Adapter
The CS6 pattern maker is a welcome feature. Only problem is, I save a pattern I create and do not have the least idea where illustrator conceals it.
View 2 Replies View RelatedI have polyline that graphically represents a pipe. Obviously, the polyline can not contain data for a pipe: size, material, insulationtype, insulationthickness, schedule, etc. So, I have created a custom object with all of the appropriate properties, methods, events, etc that I need for it to behave as a pipe. My custom object has a reference to the actual polyline with a Handle property stored as a long(since AutoCAD objects can not be serialized). I referenced an AU 2008 class by Jeffery Geer (A Pattern for Storing Structured Data in AutoCAD Entities CP401-2) to get me as far as I am.
My object is marked serializable. I serialize it to binary and attach the binary in 127 byte chunks to the xRecord of the polyline object.However, as soon as I attach this binary xrecord, I get the following message when I try to save the drawing:
"One or more objects in this drawing cannot be saved to the specified format. The operation was not completed and no file was created”
how can save my custom menu to cuix file after creating it by vba using ThisDrawing.Application.MenuGroups.Item(0) and if i can create new cuix file "AMRCuix" and every time i will load it.
View 2 Replies View RelatedIs this a bug? I can't save a custom export preset. I set it up, hit save, give it a name then don't see it in the list.
View 2 Replies View RelatedIs there a way to save a custom symbol library as my default? I'd like it to show up in my panels when i open new blank document.
View 2 Replies View RelatedI created a template and changed some style properties. I can not save to master location and when I open the template is tells me it is going to override my custom style.
How do I save out my custom style to the defalut location?
In some of the Photoshop "Extended" versions, there was a function in which one could apply a known measurment to an image and then determine other dimensions in the image. For example, if one were designing a sign for a building and shot a picture of the building with a known 5' doorway, one could use the measure tool (or whatever it was called in that function) to tell Photoshop that the doorway was 5'-0" wide.
From there, after you laid in the sign design, and used the measure tool on the sign image, Photoshop would tell you the dimensions of the sign based on the scale you set with the doorway. Now for the big question: One, does that function still exist, and two, if so, where do you find it?
I'm recording measurements (gray value) in a selection, using the "record measurement" in the measurement log panel. I need to repeat this over thousands of images. I've written an action that opens the images one by one (batch process), records the measurement and closes them.
However, after exactly 700 measurements, Photoshop stops and says that it cannot record this measurement. I've tried this with CS4 and CS5 (extended) as well, and I get the same result. why Photoshop measurement log has this "700 entry" limit?