Illustrator :: Where Does CS6 Save Custom Created Patterns
Nov 10, 2012The CS6 pattern maker is a welcome feature. Only problem is, I save a pattern I create and do not have the least idea where illustrator conceals it.
View 2 Replies
ADVERTISEMENT
Illustrator :: Save AI Patterns With 8bit / Channel?
Jun 27, 2012I would like to create seamless greyscale patterns in AI CS6 by using typical Vector-Tools, Gradients and Transparency.Output however needs to be 16Bit/Channel RGB - 256 greys are clearly not enough on the Gradients, they would lead to nasty artifacts in the intended field of use explanation here.I realize that AI is 8bit and that internal Image-Conversion from Vector clearly was no option.The underlying question for me is - does AI also internally work with just with 256 shades of grey in its gradients too?Or was there theoretically a way to pass smoother Vectors over to PS which in contrast to AI can save 16 bit Gradients?All I tried thus far (importing AI though Clipboard as Shape-Layers/Smart-Objects) yielded unusable results for what I'm after.
View 18 Replies View RelatedIllustrator :: How To Save Custom Artboard Setup With Custom Document Profile
Nov 1, 2012Is there a way to save a custom artboard setup with a custom document profile in illustrator cs5? I do technical illustrations and our page size is odd (7.19 x 8.96. It the size that our Framemaker layout is set to.). I have a custom document profile that I use, but I use the grids all the time so that my callouts are spaced out evenly around the art. I would like to have a way to set the artboard up so that the grid will align to the center of the artboard everytime I turn them on. Right now they always start from the top left and when I center art in the center of the page, the grid spacing isn't the same on each side of the art. I just want to be able to open my document profile, turn on my grids, have them start from the center, and I can get down to business. As it is now I have to go into my artboard settings and manually adjust the grid to the center. Small annoyance, but it still annoys me. I have tried to save it a few different ways, but nothing has worked. Maybe there just isn't a way.
View 4 Replies View RelatedIllustrator :: Can't Save New Drawings Created In Adobe CS2
Dec 1, 2013After using Abobe Illustrator CS2 at work for years, I suddenly can't open old drawings and if I start a new one even if it is small, when I close it can't save do to not enough memory. There is plenty of RAM and room on hard drive. Already have restored from an older date. Even before we (IT guys and I) did the restore we un-installed they re-installed Adobe from disk, and we still have the same problem. This is a primary program used for about 90% of the work I do.
View 2 Replies View RelatedIllustrator :: Save A File In CS5 That Has Been Created By A Newer Version?
Dec 12, 2013How can I save a file in CS5 that has been created by a newer version?
View 3 Replies View RelatedIllustrator :: Unable To Save Brush Created Shapes As DXF?
Dec 17, 2013I'm using Illustrator to creat shapes that can be exported as DXF files then taken into a program used in CNC plasma cutting of metal art. I'm able to do this with art work drawn with the pencil tool and blob brush. I also want to do this with the brush tools creating florishes and other shapes. I've been able to take a paint brush drawn line with width, rasterized it, and then image traced it to creat a line shape with handles which allow it to be adjusted however I've not been able to get rid of the selection box, it seems to need to be selected in order to work on the shape, and the drawn lines created when I image traced it seem to be double lines. Also I can't get rid of the box that is drawn when I select the lines so I can use the handles to manipulate the shape. Most important I've not be able to export shapes draw this way as a DXF file.
View 1 Replies View RelatedIllustrator :: How To Save Custom Workspace In CC
Sep 10, 2013how to save a custom workspace in previous versions does not exist in Illustrator CC. Has this option been reconfigured or simply forgotten? I'm using a Trial Version.
View 13 Replies View RelatedPhotoshop :: CS6 To CS5 Custom Patterns
Aug 28, 2012I am trying to send a client a photoshop CS6 file whom is using CS5. He can open the file but the custom patterns are not converting even after installing the patterns.
View 9 Replies View RelatedPhotoshop :: Custom Patterns?
Jan 13, 2003If i have an image that i have used custom patterns on and i want to give out the PSD file for people to use and change things and resave do i need to give out the custom patterns? for instance i made a custom line pattern, will that not appear if i dont hand it out too? and what filename should i give it if so?
View 1 Replies View RelatedAutoCAD LT :: Custom Hatch Patterns
Jul 15, 2013I have two, seemingly identical, installations of AutoCAD LT 2012 on two machines in our office. Both machines have the MEASUREMENT variable set to 1.
The acadltiso.pat file of both machines has been customized with the addition of two hatch patterns and both of these work just fine.
In addition, the support folders of both installation also have identical sets of custom hatch patterns. On one of these machines thumbnails for these are visible and all works entirely as expected. However, on the other machine, none of these custom hatch patterns appear at all. In fact I cannot even see the custom hatch pattern tab!
Illustrator :: Save Custom Symbol Library As Default?
Jan 23, 2014Is there a way to save a custom symbol library as my default? I'd like it to show up in my panels when i open new blank document.
View 2 Replies View RelatedAutoCAD Inventor :: Custom Hatch Patterns
Nov 30, 2003created any custom hatch patterns for Inventor , If so, how?
View 3 Replies View RelatedAutoCad :: Loading Custom Hatch Patterns
Jan 13, 2009I am trying to load hatch files from StoneCAD. In the past I have been able to take hatch patterns from various sources and locate them in a file within AutoCAD LT, then use them without issue.
I have never touched a .pat file or written anything in notepad or word, just simply copied the .dxf files to a file on my computer and was able to use them through AutoCAD LT 2009. Recently I had to reload the software and I can't figure out where I would go to put these hatch files.
AutoCAD 2010 :: Saving Custom Hatch Patterns
Aug 20, 2012Where do I save custom hatch pattertns in autocad? What file? Support? Do they have to be saved one at a timeor can they be saved in a folder?
View 4 Replies View RelatedAutoCAD Architecture :: Custom Hatch Patterns Using Blocks?
Mar 15, 2011I've not done custom hatch patterns in the past, but I'd like to create a custom hatch pattern using a block I have. Is there an easy way to do this?
Would like to make a 8" CMU (section) hatch pattern, as an example, to use in automated sections that I generate.
Pretty easy to see where I'm headed w/ this.
Any easy conversion tool or the ability to explode the block, select everything for a hatch pattern and click "OK".
Likely there isn't, but it never hurts to ask when starting out.
AutoCad :: Loading Custom Hatch Patterns In 2010
Jul 29, 2011I have added my custom hatch patterns to the .pat file and they aren't showing up. Is there a certain step I am missing in order for this to work? Is there an easier way to load my custom hatches in CAD 2010 that I am not aware of?
View 2 Replies View RelatedAutoCad :: How To Install Custom Hatch Patterns Within 2010
Sep 2, 2009recently installed Acad R2010 and I need to install new custom hatches but don't know how.... I got working with Autocad since 1990; probably it was R2.0. This is the first time that I try to do it, so I don´t want to mess the whole thing misplacing my .pat files.
View 9 Replies View RelatedPhotoshop Elements :: Load / Use Custom Patterns On PSE11?
Jun 18, 2013I have beent trying to follow the instructions found at the URL below (second half of the video) in order to load custom patterns onto Elements 11. The video says I need to go to C:/ drive, then Users, then my folder, then AppData, then Adobe, then Photoshop Elements, Roaming, and Preset(s). However, the only program folder in the Adobe folder is for FlashPlayer. I have searched the entire computer, and while I can find the Photoshop Elements folder, it does not contain Roaming and/or Presets folders.
[URL]
Illustrator :: Save Docs As PDF Script - Include Custom Filename Suffix
Oct 16, 2013I'm trying to add some efficiencies to larger projects buy reducing the number of steps required to export to pdf. I'm looking to add a custom file name to the string.
DESIRED
From:
20131006_KK_Brochure_v1.pdf
To:
20131006_KK_Brochure_v1_OUTLINES_PRINT.pdf
However, I'm experiencing problems with the following code that I have modified. The below code is adding "_OUTLINES_PRINT" as a prefix, rather than a suffix.
function getTargetFile(docName, ext, destFolder) {
var newName = "_OUTLINES_PRINT";
if (docName.indexOf('.') < 0) {
newName = docName + ext;
[Code]....
Photoshop :: How To Save Original (date Created) With (save As)
Mar 27, 2013I need to convert a large number of images to png and need to later sort them by the original date created. "Save as" results in the current date/time as the date created. CS5.
View 4 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Deploying Custom Hatch Patterns Using Installer
Nov 29, 2012I am wanting to build an installer to deploy some custom hatch patterns. Getting the hatch patterns onto disk is easy; however, I need to add this location as a support path (presumably via a registry entry) but the number of potential registry entries is huge given the combination of AutoCAD releases and verticals. The other option I had was to deploy the hatches to the same location as ACAD.PAT and search for this location during installation.
FYI - I plan to use Inno Setup but am not opposed to another installer.
AutoCAD Map 3D :: WARNING - Message After Custom Coordinate Is Created
Jul 14, 2011I created a Custom Coordinate using a predefined coordinate (Meter to Feet). Everything is ok except when I restarted Map3D, I get a warning message and I am not sure what I did or did not do to cause it.
View 1 Replies View RelatedAutoCAD 2013 :: How To Recover Old Profile Settings And Save Hatch Patterns
Aug 7, 2012I am working with a client who upgraded to 2013 and their profile settings have disappeared. They also are not able to open hatch patterns that have been copied to the default folder, which is added to the support files search path.
I am not a CAD user or expert with the application, but am required to provide IT support for a client that uses the product.
Steps to recover the old profile settings and save the hatch patterns so they are available each time the application is opened?
AutoCAD Inventor :: Custom Library Created By Material Guide Auto Drop Table
Nov 20, 2011I have created the Custom library of ISO bolts by adding the Material to existing ISO library using the Material Guide.
The goal is to make bolts black and anodized to be more specific with purchase orders from very beginning.
After the adding the material everything is working good except the auto drop. There is a wide Table pop ups with a lot of unnecessary info.
Is it possible to choose the columns to represent there? I mean leave just Material or Part Number ?
[URL] ........
Photoshop :: Way To Save Actions That Have Created?
Nov 23, 2012What is the correct way to save photoshop actions that I have created? I currently save them by selecting the folder and then 'Save Actions' from the dropdown.
View 2 Replies View RelatedPhotoshop :: How Do You Save Vector / Pen Created Images?
Jul 16, 2004I did that tutorial but didnt' create a "layer set" in the beginning. how do you save this?
View 3 Replies View RelatedPhotoshop :: Where Are HTML Files Created By Save...
Jul 22, 2008I've sliced an image for publishing to the web and saved it as an HTML file using the Save for Web command (PSC3). It is my understanding that PS creates the images and pages according to the options set in the Save for Web dialog, however, when viewed, the page shows place holders for the slices, but only red X's for the images. The resulting HTML code references a number of GIF files located in an "images" folder, but I cannot find the location of that folder. Search does not show a folder, nor the referenced file names.
Am I mis-understanding the HTML option in the Save for Web process? If not, where did PS put the images it supposedly created from the slices?
Illustrator :: Custom Menu And Commands In Adobe And Invoke Custom Actions
Oct 21, 2013Can we place a custom menu and commands in Adobe Illustrator and invoke custom actions? The need for us is to call a C# DLL from these menu commands. I see C++ support but none on COM or NET support.
View 2 Replies View RelatedIllustrator :: How To Convert Patterns
May 3, 2013How can I convert patterns so that I can plot them? Or if it is not possible to it in Illustrator , are ther plug-ins available for that purpose ?
View 2 Replies View RelatedLightroom :: Cannot Save Newly Created Watermark - Gives Error
Dec 24, 2011When I create a new watermark it will not save and gives an error.What can I do about this?
View 1 Replies View RelatedIllustrator :: Patterns Don't Show Up In PDF File?
Jul 11, 2013Why won't a pattern fill I used in an Illustrator CS5 file show up when I save as a pdf?
View 32 Replies View Related