Photoshop :: CS6 Convert To Profile
Sep 26, 2012
I've discovered what looks as a little bug to me in CS6 (as compared to PS CS3 and CS4).
When using Convert to profile, AdobeRGB->AdobeRGB "conversion" bugs in the preview. Since there's no actual conversion, the preview should remain the same but instead shows a strong contrast shift.
Here's my workflow:
- Working color space : sRGB (I use Europe General Purpose 3 preset)
- Open a document in AdobeRGB (original profile preserved, no prior conversion to sRGB), no soft-proofing activated
- I run "Convert to profile", Source profile is Adobe RGB. Now if I go for Destination profile: AdobeRGB (which is of course "pointless"), I see a color shift in the image preview. If I run the conversion, the image reverts to normal, hence this just affects the preview. Note that converting to other profiles like sRGB doesn't give a wrong preview.
"Convert to profile" settings are Engine: Adobe (ACE), Intent: Relative Colorimetric, Use black point compensation and Dither. Altering these settings doesn't correct the bug I'm mentionning.
This visual preview bug only affects AdobeRGB -> AdobeRGB conversion (again, yes, I know, it's pointless)
I've tested the issue on two separated machines (Windows 7, PS CS6 x64)
View 3 Replies
ADVERTISEMENT
Aug 28, 2008
Assign Profile and Convert to Profile does not shows in Edit menu for PS CS3. How do I get those options displayed on the Edit Tab?
View 3 Replies
View Related
Sep 5, 2006
I have to treat a few images for a newspaper, and I have to apply an specified Color Profile for them.
what's the difference between the commands "Assign Color Profile", "Convert to Color Profile" or doing "Mode>CMYK, and then Assign Profile",
View 9 Replies
View Related
Jun 29, 2013
I'm looking for a method to convert an ICC Profile to LUT.
View 15 Replies
View Related
Sep 8, 2012
how to set my F2 key to Edit> Convert to Profile (instead of my display brightness)?
Photoshop: Edit Keyboard Shortcuts> Convert to Profile won't accept my F2 key (it lights up my brightness)
System Prefs> Keyboard> Shortcuts is probably the key, but unchecking F2 doesn't solve the problem
PS13.0.1
View 7 Replies
View Related
Mar 9, 2004
Here's what I'm using:
PS7, Adobe 1998 working space, monitor calibrated with ColorVision Spyder, Win XP Home.
When I have finished adjusting my pictures I Convert to Profile as sRGB. There's little or no change in the image itself after doing it, as one would expect. But here's the kicker, when I "save for web" the preview image has a distinct magenta cast to it.
Am I right in thinking that the preview image should look exactly like my PS image as they are both sRGB?
Is there a setting somewhere that says "Add magenta cast" :O
View 1 Replies
View Related
Apr 20, 2008
when I convert an image from Adobe RGB to sRGB. What I see is no change whatsoever, that is visible to my eye. My working space is Adobe RGB, but when I convert an image to sRGB in order to send it for viewing on a monitor, as for example when attaching a lower-resolution version to an e-mail, I see no difference in the image on my calibrated (Spyder2) monitor.
I start with an image taken with my Canon 40D with the color space set for Adobe RGB, as
I print most of my good images and do not post images on the Web with any frequency. As
I mentioned, my Photoshop CS3 working space is also Adobe RGB. When I do use Convert to Profile... and choose sRGB, I can see no change at all. I have tried a different copy of the sRGB profile (sRGB IEC61966-2.1), properly installed in
C:/Windows/System32/Spool/Drivers/Color, but there is no difference.
View 10 Replies
View Related
Apr 18, 2004
Problem:
Have put new icc profiles into
Windowssystem32spooldriverscolor
Also have deleted some old icc profiles from the same directory.
But these additions and deletions do not show up in Photoshop - specifically " imagemodeconvert to profile "
Any thoughts of how to get Photoshop to reset the profiles.
Tried deleting everything out of the Photoshop settings under Documents and Settings to no avail.
View 2 Replies
View Related
Nov 19, 2012
I. Per the instructions of the printer who's printing my work, I've converted my image profiles to Dot Gain 20%. I would like to make sure that what I'm seeing on my screen will a) be a close match to what she (the woman printing the work) will see on her screen; and b) give me a sense of how the printer (Espson Stylist Pro 4800) will interpret and print the work.I should change my Proof Setup to Dot Gain 20%, no?
II. I also need to make a set of jpegs that will be seen on a variety of screens, each of a different make and calibration. These jpegs need to be as convincing a match to the print as possible, with allowances, of course being made for paper, ink, etc. The match has to be close. Is there a standard for softproofing that will allow me to see what's likely to appear on a given screen. A tall order, I know. Wondering if I should just inform the viewers to view the jpegs with their monitors set to a certain color profile--or if I should send them a monitor profile along with the jpegs.
View 4 Replies
View Related
Feb 20, 2013
I get different results when converting to the same color profile before and after converting to smart object.Do the following:
1. create a cmyk document with color profile 'Euroscale coated v2' and fill the document with the color 86, 32, 14, 0
2. change the color profile to 'Euroscale Coated v2' -> the values change to 73, 29, 16, 0, no color change on the monitor
3. create a smart object -> the values stay the same, no color change on the monitor
4. create a second document like in step 1
5. create a smart object -> the values stay the same, no color change on the monitor
6. now change the color profile to 'Euroscale Coated v2' -> the values stay the same, this time we have a color change on the monitor.
View 7 Replies
View Related
Mar 22, 2013
I am converting a print design in photoshop cs5 from RGB to CMYK. My Layer got merged after using convert to profile form RGB to CMYK.
after this i have save file and close it and i didn't have backup of this file.
Now How do i recover my all layers
i need only my layers back.....
View 6 Replies
View Related
Dec 2, 2012
I have just moved over to Photoshop CS6 from Elements 10. One thing I can't work out how to do is to have PS automatically convert opened files to RGB, exactly like PSE does.
View 8 Replies
View Related
Feb 18, 2014
Recently, I have needed to convert my CR2 or DNG files to CMYK profile for a printer. It is my understanding that PS Elements (any version) does not support CMYK profiles. I am an avid amateur I think I need to change from Photoshop Elements to CC or PSCS. What would be the most cost effective way to accomplish this goal?
View 2 Replies
View Related
Jun 2, 2012
I read the Photoshop Windows (read only) thread, titled "Scanning old photos", at [URL]......... I found Robert Shomler's answer useful, even though I am using an i Mac.
I have been using Epson Scan Version 3.01A and the Epson Perfection 4490 Photo scanner to scan reflective photos for over three years. I started using Adobe Creative Suite 6 Design Standard, and Photoshop for the first time, last month. My iMac is about one year old, and System Preferences shows its Display profile as i Mac.
I am befuddled by Epson Scan Version 3.01A's Color Configuration settings. I believe that I've been using the default Color Control, Continuous auto exposure setting for all these years, accept that I apparently changed Display Gamma from the default of 1.8 to 2.2.
I tested scanning the same originals with both the Color Control setting, and the ColorSync, Epson Standard, Target sRGB setting, as TIFF's. The resulting TIFF's look radically different in color, when displayed with Preview and Photoshop. The images resulting from the ColorSync, Epson Standard, Target sRGB setting more closely resemble the originals, except they appear to be a little flat.
At the moment, I have the Photoshop color working space at sRGB IEC 61966 2.1. When I open one of the scans done at the Color Control setting, select Assign profile sRGB IEC 61966 2.1, and check "…convert document to working RGB", I don't see any change in the color. The color does not change to look like the scans done directly to sRGB IEC 61966 2.1. Is that right?
I notice there is also an option to Assign profile Epson Perfection4490 - reflective. When I try this, the color changes to something different from both of the aforementioned test results.
View 11 Replies
View Related
Nov 17, 2012
I received specific menu choices for Color Settings from a commercial printer I use. I went to Edit<Color Settings and saved them as a .csf file in User/Library/Applications Support/Adobe/Color/Settings. I named the .csf file after the printer. When I go back into Edit<Color Settings and open the Settings menu I am able to choose the settings I saved from the list of settings. Now I open an image in PhotoShop and go to Edit<Convert to Profile.
In the dialog box I open the Profile menu, but the settings I saved in Edit<Color Setting are not one of the Profile choices. Am I confusing Setting and Profiles? How do I Convert an image file to the setting given me by the printer? I also wanted to proof as per the printer's settings. When I go to View<Proof setup<Custom I can choose Working CMYK Web Coated SWOP 2006 Grade 3 Paper, which is generally the profile this printer is using. But I can't choice my specific color settings saved under the printer's that I previously saved in Edit<Color Settings. In the Proof Setup dialog box when I press the load button I can navigate to the Settings folder where my .csf file is saved, but it is greyed-out so I can't choose it.
View 2 Replies
View Related
Nov 23, 2012
I can't find a way to import an .icc into my GIMP work.
I want to do this so that the pictures on my computer monitor match as closely as possible to the prints from my local (high-end) print shop. My screen is Spyder calibrated.
I'm trying;
Image >>> Mode >>> Convert To Colour Profile >>> (and then from the pop-up box) >>> Convert to ... (and then from the pop-up box) >>> Select Colour Profile From Disk
... and then I select the new .icc (provided to customers on the print shop's website) from a Downloads folder on my local drive.
That all sounds right doesn't it?
It stubbornly remains on sRGB.icc
I've also tried the process in;
Edit >>> Preferences >>> Colour Management
Same result - ignores the selection of a new .icc and remains stuck on sRGB.icc.
I'm desperately trying to colour correct for printing today.
View 2 Replies
View Related
Sep 24, 2013
I HAVE A 2D PROFILE (DWG FILE NOT CIVIL3D FILE) of a pipeline that shows invert of the pipe.
I want to have this pipe as feature line .
is there any way to convert this profile to feature line?
View 1 Replies
View Related
Aug 13, 2013
I have a 2D (dwg) plan and profile of pipeline ( Scanned) and I am going to find a way to have this pipe as 3d ( or featureline).
I can't do this manually because this is a long pipe.
View 3 Replies
View Related
Oct 30, 2012
How do I convert the colour profile of a Lightroom custom printing package from Adobe Prophoto to sRGB before printing? For that matter, how do I save the thing? I have no interest in saving the template, or the collection separately, since neither has any use without the other. And without saving them as one finished item, I have no way to convert the colour profile of that item. I can see clearly from the appearance of the print preview that the above mentioned colour profile conversion is required.
View 1 Replies
View Related
Sep 30, 2013
I've been trying to reproduce this color blind conditionfor a long time now and I still didn't figure out how I can do this. I've searched for cluts but didn't find any, only this, which has some previews of them, but no any files I can load into Photoshop's Color Lookup adjustment. I've looked into Pixel Bender plugin, but I'm using CC so that doesn't work either... I've also tried it with the Index Color mode, but that really messes up my image as it has a really low color range (256). I've even tried reproducing the same effect with adjustments, channels, etc, but didn't figure it out.
Since there's a way to perfectly color proof images with this condition, I'm guessing this has to be some kind of ICC profile or something similar. Is there a way I can use it as a color profile?
View 2 Replies
View Related
Jan 28, 2013
How do you add a custom working space profile to the profile list in CS6.
View 1 Replies
View Related
Jan 16, 2013
this file is tagged "c2" -- it doesn't trigger a profile mismatch warning -- why my working RGB is sRGB
View 9 Replies
View Related
Dec 21, 2012
For a monthly magazine on uncoated paper, our workflow is as follows:
- convert every photo to uncoated cmyk (PSO Uncoated) + apply some corrections to look nice in this profile
- apply a fixed correction curve to the photo's
- (resize images + apply proper sharpening for print)
- export pdf: convert colors to destination, preserve numbers
The correction curve step is critical. Without it, everything is printed much too dark.Unfortunately our printer can't provide us with a correct profile for the paper that is used. That's why the correction curve in photoshop is needed.The profile + the correction curve give a good, predictable result.
However i don't like the workflow with the correction curve, because only photoshop links can be corrected.We would also like to put a digital version of the magazine online, so i have to replace all links if i won't to have them displayed correctly.
Can i somehow combine the icc profile with the correction curve into a new icc profile?I did some research and found about "Custom CMYK" in photoshop (see screenshot), but i think an existing profile (PSO Uncoated) can't be edited or replicated in this dialog box.
View 5 Replies
View Related
Mar 1, 2013
I have an alignment label that I normally use to show the PVI's of a profile in the plan view.
This is a little unusual, but in a specific case I wanted to design my profile at one alignment, but show it at another. I designed my swale profile in the pathway profile view and then superimposed the swale profile on the swale profile view. I then went back to the swale alignment to add these labels.
It's a no-go AFAICT. The only profile available for me to select for these labels is the original ground profile from the surface.
View 5 Replies
View Related
Nov 4, 2013
I'm working with a structure profile label style and it seems like the only way to anchor the position of the label is based on offsets from the structure itself... Any way to position the label based on the top of the profile view, so that I could make all of my labels horizontally aligned above the profile view?
View 9 Replies
View Related
Mar 14, 2013
Im creating a Profile Bandset and would like to have multiple surface/profile elevations shown, ie: EG, FG, Back of Curb and Back of walk. While creating this bandset I see that the text component editor properties only has code for profile 1 elevation and profile 2 elevation in the properties area, which the code for this looks like below.
<[Profile1 Elevation(Uft|P2|RN|Sn|OF|AP)]>
<[Profile2 Elevation(Uft|P3|RN|AP|Sn|OF)]>
Ive tried to write my own code using the profile 2 as an example but it doesnt seem to work as a 3rd surface/profile and only seems to mimic the profile 2 elevation when placed in the band
My questions are as follows
1) does Civil 3d only allow 2 surface elevations in any band set? if it does allow more profiles/surface elevations what am i missing to create it?
2) if Civil 3d does alow for multiple surfaces to be shown in the band set how do i get the text component editor to supply the extra profile elevation codes? or would i need to create from scratch
3) if i need to write the code from scratch does any listing of the codes and meanings of each code ie what does RN, Uft, Sn and so forth do and mean .
View 3 Replies
View Related
Oct 9, 2011
I want to create a profile/wall style or what ever you want to call it for a raised deck flooring for external decking. I am looking at the decking material only. Not concerned about the timber framing sub floor material.
View 1 Replies
View Related
Mar 5, 2012
I have a group of profiles in a drawing and I want to change how one of the profiles is displayed through the profile view style manager, but I do not want to change how all of the profiles look. Is there a way to change the way a single profile looks without changing all of them?
View 2 Replies
View Related
Jun 17, 2013
I have a profile showing proposed storm sewer, existing sanitary, rock surface, existing surface, and proposed profile. Today for some reason the proposed profile and labels, and the existing surface are not showing on the profile and I'm not sure what has changed or how to get them back.
View 3 Replies
View Related
Jan 17, 2012
I am working C3D 2012. I have a proposed alignment and profile design by another firm that I had to tranfer into C3D. I had no problem getting the horizontal alignment to display from a text file. I tried to do the same with the profile by using the 'create a text file and create the profile from file' command. I got the POB, PI's, and POE to display. I then defined the VC. I wanted to verifiy that the profile was indeed accurate compared to what we were provided. So I tried to execute a profile report PVI Station and Curve Report - I keep getting an error that "No FG profiles in dwg".
I know the Proposed profile is indeed set to proposed in the properties. I have noticed that the icon next to the profile I create from the text file is different than the profiles created from scratch.
Is there a way to convert this profile to be recognized as a FG profile?
Intel Core i5-2500K CPU @ 3.30 GHz
8.00 GB
64-bit
View 9 Replies
View Related
Feb 28, 2011
I try to make curb return profile without profile view like a intersect command.
I was make curb return alignment but I can not find profile command without profile view.
View 6 Replies
View Related
