I try a 3th time.Photoshop CC will only print as administrator. If I start Photoshop CC as standard user, It will not print. I got a message which in translations is litke this.Error then printer opens. Printing can not work before You have choice a printer and open the document again."
View 6 RepliesI recently installed Photoshop CS for a user. After installing, I ran the program without issue. When the user logged in and tried to run it the following error was displayed: Â Â Â Â "Current user account does not have privileges to perform product activiation. Run this application from a user account with administrative priveleges or contact your system administrator." We do not allow any users to run as administrators at the company I work for. We are willing to elevate permissions for users if a program references files that standard users do not typically have access to. We attempted giving full control to the Photoshop folder but that did not work. Has anyone run into this error and found where the permissions need to be changed?
View 6 Replies View RelatedI've seen several similar threads with problems with Bridge, nothing recent with run issues with Photoshop CS6. I have installed most of the programs downloaded from the Cloud. Most run. So far, I've found Bridge, Encore and Indesign encounter a "Problem" upon opening and close with no further message or details. Dreamwever, Flash, Illustrator and Premiere run as far as I've tested.
Â
From my user account Photoshop CS6 brings up a message about a locked scratch file and cannot run. I can start PS CS6 using Run As Admin and everything seems to run fine. Changing permissions on discs and on my user account still has PSÂ CS6 fail to start. I've read similar posts on earlier releases. I have tried purging the preferences, both manually and using the crtl+shift+alt start. I still cannot get PS CS6 to run from my user account.
Â
FWIW
Gigabyte MB, w/ i72600k
Windows7 64bit
SSD for C:
standard disk for user accounts
standard disks for scratch and file storage (each its own disk)
Â
I tried the uninstall / reinstall game without any change.
I did silent install for cs4 extended, went nicely.
Program itself starts nicely, but if I try to open a file or create a new file, cs4 crashes. This happens if I'm logged as user.
IF I start cs4 as administrator (or via "run as administrator"), program works ok.
Already updated drivers and updates cs4 to 11.01...
I have had a problem with the Nik Software Silver Efex Pro (SEP) plugin running extremely slowly, but only at certain times. It's been pretty good for the past few months, but it suddenly took a nose-dive a few days ago. It takes ages to load the presets and to process the image in Photoshop once I have made my selections in SEP. I just thought that as SEP is a direct plugin to CS6 Photoshop then perhaps it's something to do with the way Photoshop itself runs. I switched the running of Photoshop to 'Run as administrator' (just right click the program in the start menu and go to compatibility tab) and SEP now runs extremely fast. why running as Admin should make such a difference? Are there any problems in running in Admin mode?
Â
I run Norton Internet Security, and thought that as I'm now OK in Admin mode it might be a virus-checker problem, and running in Admin mode was getting around the problem. I do have both versions of Photoshop (32 and 64 bit) included to 'allow' access in Norton.Here is my system config. My PC runs very well in all other respects.
Â
System Information
------------------
Time of this report: 6/27/2012, 17:44:57
Operating System: Windows 7 Home Premium 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.120503-2030)
System Manufacturer: Acer
System Model: Aspire M5811
BIOS: Default System BIOS
[code]..
Everything worked so well in CS5 Extended......
Â
Windows 7 Pro 64 bit - MSI 990FXA-GD80 Motherboard - AMD Phenom II X6 1100T CPU - nVideo GTX550ti Video
Â
I have CS6 running on an SSD. Initially with CS6 Beta I found I had to run as Administrator. I eventually discovered how to run as a user by going into Preferences / Performance and setting my scratch disk to my hard drive.
Â
now I have the CS6 release. I deleted CS6 Beta as instructed and followed directions for the install. CS6 works fine except for the bugs that I reported in the beta forum . My problem is now that Bridge insists on running as Administrator. If I try and run it as a user, it comes up and quits immediately. It doesn't make a wisp of difference where I set my Cache file, SSD or hard drive. I can even deal with that, however now I can't start Bridge from Photoshop! I click on File / Browse in Bridge and nothing happens. If I start Bridge then go to Photoshop and click on File / Browse in Bridge, still nothing happens. I have to manually switch to the Bridge window.
PhotoShop CS6 on Win7 starts only in administrator mode. Also InDesign CS6. I can't work with task list or direct job contact.
View 2 Replies View Relatedwhen i run my photoshop cs5 in administrator mode using "run as Administrator ... ", drag and drop does not work.
View 2 Replies View RelatedI'm logged in as local administrator to Windows 7 64bit OS and everytime I tried to install CS5.5 Master I kept getting this message, "Administrator privilege are required to install" I can install any program but just not CS5.5.
View 6 Replies View RelatedI have a user who installed Map 3D 2011. We originally had some install issues, but a clean install and update to .NET framework 4.0 has seemed to finally be able to allow us to install the software. During installation the AV software was deactivated. User has full admin rights. Now when he double clicks the icon to launch the software he's receiving an error dialog box that is titled "Exception in acmgd.dll ARX Command". The only way he can get it to run correctly is to right click on the icon and select "Run As Administrator".Â
View 2 Replies View Relatedwe encounter the following error when trying to launch the Revit server web portal,
View 8 Replies View Relatedmaking print templete in Autodesk Infrastructure Administrator?
View 1 Replies View RelatedOne of our domain users cannot access Autocad 2007LT as a domasin user in Windows 7. As soon as we make him temporary admin it allows him to use it. A pop up box appears asking far administration credentials before he can use autocad. We have tried giving read and write access to the autocad files that we think it links to but this has not worked.
View 3 Replies View RelatedWe are using .cuix file which gives access to tools in custom .arx file in AutoCAD 2012/2013. We load the menu using the .bundle mechanism and the plug-in - using button from the menu. If the user is Administrator (or executes AutoCAD as Administrator)Â the menu, toolbars and ribbons are loaded correctly and the user can load and unload the application (lisp function in .mnl file is used for that), but if the user is not an administrator either the menu, toolbars and ribbons are not correctly loaded or they are loaded, but the user can not load the application.
We have found that a probable cause for this behaviour is that AutoCAD tries to create/renew the .mnr file when first loading a .cuix file and since the user has no administrator rights this can't be done in the "C:Program FilesAutodeskApplicationPlugins" folder where the bundle is and AutoCAD creates the .mnr file in its own support folder ("C:Users<User>AppDataRoamingAutodeskAutoCAD 2012R18.2...Support") together with a copy of the .cuix file and changes the path for loading the .cuix file to this location. Since the .mnl file containing the function for loading/unloading is not copied with the .cuix file the application can not be loaded.
The user has to delete the created files under the support path of AutoCAD, unload the .cuix file and then reload it from the correct location to resolve the problem. Restarting AutoCAD leads to the same problem.
Is there a way to prevent this behavior other then running AutoCAD as administrator (that is not always an option)?
In LR4 print module the print and print one tabs are greyed out and I can't reset.
View 1 Replies View RelatedSo I am working on this document and it has silver background. I go to print preview (Photoshop cs3 and cs4 on Vista) and I get color looking more like bronze looking but when I do print, it comes out just like it should (in working mode which is Monitor RGB with Proof colors checked).
This setting is the only one I've used to make sure image/psd looks exactly like what it should when printing. I tried the default Working CMYK with and without Proof colors but it's still showing me the bronze look instead of silver. I've looked on the net and no exact easy fix for this was found. I really really appreciate any help.
Another simple question is regarding size. I'm working on a document size of 17.5 x 8.7 inches and the actual Banners will be printed at size 175 x 87 inches (5 banners each at 35inch wide but combined into a big one). So essentially, I'm working at 10% the size of what the final print will be and my file size is 760mgs. You can only imagine how big the file would be if I work on the actual size.
When printing from PS CC using the print dialogue box I am getting a severe red shift in the final print. When I print the same image from PS CS5 or CS6 I get a color-correct print.
Â
I am running a MacPro with OS 10.7.5, and printing to a Canon iPF8300 with its latest firmware and print driver. I am using the proper ICC profile for the paper. In the print dialogue box, I select "Photoshop Manages Colors".
Â
A couple things I noticed: In the "Print Settings" where I dial in the printer setup, the settings for "Color" are both turned off (Colorsync & Vendor).In the printer driver settings (still within "Print Settings") the "Color" tab is grayed out, but when I click the "Settings" for that sub-panel, Colorsync is selected.When I printed the image from the Canon PS Plug-in, the red cast was gone, but the blacks were too heavy (there is no "Black Point Compensation" check box available because the Canon plug-in uses Adobe Color Engine for that, and it's only 32-bit and won't run).Â
-PC based system running Windows Home Premium 64 bit8 GB ramLots of hdd spaceCS5.5 Master Suite
-Epson Sylus Photo R1900
Â
Operating system, CS5 suite and printer drivers all updated.
Â
When attempting to print a photo, it can take anywhere from 5 to 15 minutes for the print dialog box to open up. It takes SO LONG that it appears that Photoshop has frozen, but it has not. The print dialog box opens eventually. This started about 2 months ago. I have looked at all preferences, assigned more RAM to Photoshop, uninstalled and reinstalled the entire suite, ran all updates, uninstalled and reinstalled the printer drivers - all to no avail.
Â
I am at a loss as to why it would take SO LONG for the print dialog box to open after selecting print? I thought there may be a problem with the print spooler or print queue, but the slowness happens BEFORE the print back system is touched. The print queue is empty, and there is nothing stuck in there. I've checked.
I'm having trouble printing in Photoshop CS2. Rregardless of which printer I try to print to, I get the message "Could not print because of a problem writing the print file". I have never encountered this error before.
The psd file I am printing is a wall banner, and is quite large (~200MB). It contains elements copied/pasted as pixels from Illustrator CS2. However even if I flatten the file, or save as a flattened tif, I still get the same error message.
Thinking that the psd file is corrupted, I tried printing an earlier version of the file, with no luck. I've even tried printing other, small unrelated files, and can't print those either. Even after rebooting the computer.
The computer I'm using has a dual core processor, 4GB RAM, a decent graphics card and is running under XP. I have gob-loads of HD space and also use a scratch disk.
I really only want to print the file myself as a proof. However, I'm concerned that the banner printers won't be able to print the file either.
I have Windows 8 and am new to Elements 11. How do I get print to completely fill a 4 x 6 print paper?
View 5 Replies View RelatedI have trial version of Elements 11; Also have full version, but have not installed yet, as I wanted to wait until I completed current project. I created/edited an album of wedding photos in the Organizer. I tried to upload album to Shutterfly to make an archival DVD and also make a photo book in Shutterfly. The photos uploaded individually to the Shutterfly print page to print individually, but the album will not upload to My Pictures, it shows the album name, but it is empty. How do I get the photos to upload?? Shutterfly was not sure how.
View 1 Replies View RelatedUsing a Mac, what is the best way to print multiple images on a 4 x 6 print in Photoshop Elements 11?
View 5 Replies View RelatedI use CS6 on a Mac pro os 10.8.3 & print to an Epson Pro 4900. If I print an image via LR4 print module the print comes out at 12 X18 in. Recently I have tried that same image via CS6 and the print comes out at 6 5/8 X 8 1/2 in.
Â
In Print Settings in Printer Setup in the print module of CS6Â stats "Super A3 / B 13 X 19 but the printed image dimensions are a little over half of that.The printer used to print normally in CS6 print file.
I've been using Photoshop CS3 for awhile and printing fine. I just updated my print driver (Epson 3800 to version 6.5) as well as my graphics driver (NVIDIA GeForce 8500 GT)at the same time. After rebooting I cannot click on the Print menu selection to print. IE: When I click on Menu the Print option is greyed and not selectable. Print as well as Page Setup, and Print One Copy are all greyed out (not selectable). I rolled back my graphic driver and rebooted and it still doesn't work. I then upgraded my driver again and it doesn't work. I've opened jpg's as well as psd files and no matter what file I open the Print menu's are greyed out. I can print from Word and other programs. I also reset my preferences (con-alt-shift) and still can't select print. I've done everything but uninstall. I'm hoping not to do that. My computer is on: Vista Ultimate 32 bit SP1, 4gb ram. In addition to updating the print driver and graphics driver I updated: Ultimate Extra Sounds, Group Policy Preference Client Side Extensions, Samsung CLP-310 Printer driver, and Microsoft Tinker.
View 4 Replies View RelatedAdobe Colour Management Print defaults seems to be assigning RGB meta to B&W pages and incurring Colour Print charges for B&W prints.I can manually change the print colour management to Printer managed on a per print basis instead of the default adobe colour managed which "cures" the issue but I do not seem to be able to save that setting as the default.
View 1 Replies View RelatedI have a number of maps in .tiff format. I want to cut parts of these maps and paste into seperate documents. That is fine. I then want to blow them up to A4 size for print. I am slightly confused on how to do this for the following reasons: Under the "image" menu item, I can see "pixel dimensions" and below this "document size".I can also set the canvas size. I am not sure if "document" and "canvas" size are the same? Could somebody please advise me. Basically, I want to enlarge my tiffs to fill a European A4 size page. GF
View 2 Replies View RelatedI get an error saying I need to install a printer ... but CS2 works fine. What do I need to do?
Windows XP, Konica Minolta C253
When printing in 3d with the vp set to 3dhidden and the shade plot set to hidden legacy some solid items print with the wire frame. This usualy happens with torus and cones. How do I stop this?
In the example look at the U-bolt.
I am having trouble printing to an HPÂ Designjet T770 from AutoCad LT 2012, on a Windows 7 computer.
I am using the HPGL/2 driver. I can print a test page, and I can print from other programs.
When I try to print, it looks like it is sending it normally, but the printer just ignores it.
I am able to print to this printer from AutoCad 2010 on a Vista computer.
I have multiple layout pages (58 pages) and would like to print them in a printer at once. How do I do that?
Currently, I open 1 layout at a time then print it 1 by 1, in which its killing me specially if I do have lots of drawings.
Publish does saving in DWF, PDF... But does not print in the printer.
We just started in 2014 last week. When we batch plot to PDF using the DWG to PDF driver we get multi-page files no matter which is selected in the Publish Options. Any way to allow single sheet PDF creation?
View 9 Replies View Related