Photoshop :: CC Has Completely Deleted The File?
Oct 30, 2013
I have been working on a file for the last few weeks and save on a very regular basis and also have the autosvae option selected in preferences but Photoshop has crashed and completely deleted the file off the face of the earth?
I am working on a very important project and have a design session very soon and am now left with no .psd file to work with? I have looked for it everywhere and there isn't anything?
C:UsersNameAppDataRoamingAdobeAdobe Photoshop CCAutoRecoverFOLDER IS EMPTY!!
all i have been left with is the psED89.tmp file!
View 6 Replies
ADVERTISEMENT
Feb 16, 2012
Its a large file, so i shut down photoshop and then started it back up, like i do all the time. However when photoshop started up again my file i had been working on all week was gone. It could be seen in the recent files, but when i clicked it it said it couldnt find it. So i go to the directory where it should be, and, yup, its gone.
Not in the recycle bin, not anywhere on the drive after many exhaustive searches, and i cant even find it using a disk recovery tool. I have tried recuvra, which took over 2 hours, and nothing. It is completely and absolutely gone, taking away a weeks worth of work with it. I actually need this for tomorrow, but dont have anywhere near enough time to create it from scratch again.
View 9 Replies
View Related
Jul 7, 2008
The exact version of the Adobe Application you are running: Photoshop CS3
Your Operating System details. Windows Vista Ultimate
Amount of installed RAM. 3GB
Amount of free disk space.20GB
Make/Model of Video Card. Nvidia 8800gts
Precise symptoms of your problem:
i saved the psd file last night and closed my computer, today morning i woke up and found this file "unopenable" then i found out it said that file space on disk is 0. and when i tried to open it again it says file location not found. then i restarted my pc. and the file was gone, i tried to find it with the search function and i only found a shortcut file with no valid source. i dont know what caused this, if it was photoshops fault or the computers fault, anyone know anything i can do to recover this file?
View 6 Replies
View Related
May 11, 2013
I suddenly can't use my Photoshop CS5. In the middle of working on it, I suddenly got an error message saying "Could not initialize Photoshop because the preferences file was invalid. (It has been deleted.) I tried uninstalling and reinstalling PS but still get the same message. Now PS won't even open up.
View 3 Replies
View Related
Nov 15, 2012
I created a slide show in Elements 9. the show worked normally when viewed as a slide show, but when saved it as a wmv file, some of the pictures were completely black. How can I correct this ?
View 1 Replies
View Related
Nov 13, 2013
I'm running OS 10.8.5 using PS CS5.1. My mac was left on overnight (not sure how relevant that is) and when opening up PS this morning it crashed with the message 'end of file encountered' 'preferences file is invalid/has been deleted'
I've read up on a few older posts about the same thing. I uninstalled/reinstalled from disk but the same thing happens.
View 3 Replies
View Related
Nov 19, 2013
my photoshop cs6 will not start because preference file was somehow deleted.
View 1 Replies
View Related
Aug 4, 2005
i have deleted the excel file from the ipt file but when i open the part file it is still looking for the excel file. i am using inv 10 sp1 and excel 2000
View 7 Replies
View Related
May 15, 2012
how to uninstall Photoshop cs6 beta on Mac if the file (including the uninstall file) have been trashed and emptied.
View 2 Replies
View Related
Jan 28, 2013
I deleted a file that was locked by Photoshop Elements. Now Elements won't run. I tried re-install and still won't run.
View 13 Replies
View Related
Apr 24, 2013
I loaded a linetype (.lin file) in ACAD 2010 and it came out wrong. I would like to permanently remove it from ACAD(where it cant be seen when you go to load another type of line), how do you do that?
View 7 Replies
View Related
Feb 20, 2013
I'll try to write this logically, but as logic has failed to get me the output I want, I suspect somewhere there will be something highly illogical...
I am trying to export a JPEG file, complete with images. I have setup the original file to 2362x602 pixels, at 300 ppi (making a canvas approximately 200x50mm). This is confirmed through Image -> Canvas Size.
Now if I want to print to paper, I can check the settings through Image -> Print Size, to confirm what size I will get.
What I want is to be able to do the same thing for an export jpg function. I need the JPG to come out at a specific dimension, not a specific pixel size. If I export my file now (File -> Export) as a jpg, I end up with a jpeg much wider than 200mm. A quick rightclick->properties shows me the jpg is still 2362x602 pixels, at '300dpi.' So why is that not the size I expect it to be?
View 3 Replies
View Related
Jul 16, 2013
Five minutes ago I installed the latest hot fix. Now, AutoCAD Civil 3D 2014 won't work at all. As soon as I open the program and then try to open a file the system completely shuts down. Everything was working fine until two days ago. Then it wouldn't open the files and said to type in the file name on the command line. When I would do this, it always said file could not be located. I am running Windows 7 Ultimate, have an nVidea GTX 570 card, and an AMD Phenom II CPU. I'm hoping I don't have to uninstall and reinstall again.
View 9 Replies
View Related
Nov 12, 2011
Is there any way to export LR photosdirectly from LR if the original file has been deleted from Hardrive. If not, can the image from LR somehow still be printed as photos and if so how?
View 6 Replies
View Related
Apr 15, 2013
Are the previews of deleted images themselves automatically deleted from the previews folder?
View 1 Replies
View Related
Nov 19, 2013
Photoshop CS6 was working fine until about an hour ago...now the shortcut it is gone. Looks like the app is gone completely. Went into Creative Cloud and it said CS6 had updates but I am receiving an error code U44M1I210. I am current on payment.
View 2 Replies
View Related
Aug 12, 2012
So my whites and grays and everything are PERFECT everywhere but in Photoshop. Granted I don't have a hardware calibration tool, only software, but I've used nVidia's tool as well as several others, and everything is fine, except when I go into CS5. For example, the whites on this page are perfectly fine. However, in CS5 the white is cream colored.
Is there something specific to CS5 that is independent of my monitor as well as every other application that I own that makes it cream? It didn't used to be like this, so I don't know what changed.
View 2 Replies
View Related
Nov 27, 2012
When I import photos via 'File / Get Photos and Videos / From Files and Folders ...' they appear as individual photos in the 'Getting Media' box but when the import is complete they all appear the same - a grey background with an hourglass figure. How do I get the completed import to display the individual photos?
View 1 Replies
View Related
Jun 20, 2013
My colors are completely off in photoshop from the real image. I've already checked to make sure it's not the monitor, the color is fine there. I've already read the forums that say to simply turn on "Proof Colors." That does changes the colors how they should be. HOWEVER, if I try and export the file out as a png or anything, they are exported with the messed up color rather than the "proof colors." BUT if I open the image up in microsoft paint, it appears to be right, but only with paint. If I open the image with anything else (reader, indesign, picaso, etc.), the color is always messed up. I even tried exporting the png to someone else thinking it was just my computer, no luck. For some reason, I can't export anything without it using crazy colors (just like if "proof colors" was unchecked). I've tried deleting preferance and playing around with the color settings. What can I do?
here's my spects:
Windows 8
2013 Asus Laptop
Photoshop CS6
View 3 Replies
View Related
Oct 11, 2013
When I open ps cc it completely hangs. No menus will open. Cannot even close without using task manager. Should I just reload? How do I delete the old version?
View 3 Replies
View Related
Nov 6, 2008
I have recently installed Photoshop CS3 Extended but there was a problem with the serial number on the box. Adobe have issued me a new serial number to use. I uninstalled it all but when i reinstalled it, the original serial number is still there.
How do i completely remove all traces of Photoshop CS3 Extended from my computer so that i can reinstall it with my new serial number? This is a full retail version used on a Windows XP system.
View 6 Replies
View Related
Aug 9, 2013
Using the square brush set in CS6 results in a sqaure that is, in fact, not really square...
Note how there are 3 90 degree corners, but the bottom right is rounded, and the bottom and right sides are faded.Am I doing something wrong? How can I fix this?
View 1 Replies
View Related
Jul 28, 2013
i have installed CS6 on my vista PC /32 Bit, 4 GB RAM). Problem is, when i open an picture in CS6 this picture is not completely visible on main screen, rest on picture is greyed out. What can be the reason and what can i do?
View 4 Replies
View Related
Sep 9, 2013
So when I booted up this morning and logged into the CC desktop application it told me that there was a Photoshop update available. I installed the update, opened Photoshop, and my workspace no longer exists. All of my custom settings (scratchpad color, menus, docks... EVERYTHING) has been reset to the "Essentials" workspace. And when I tried to "sync settings" to hopefully pull back my custom workspace from the "cloud" it showed that I had never synced before and seemed to have no information to pull from the cloud. So that did absolutely nothing. I had also saved my custom workspace, but it isn't an option to select in the drop-down menu.
Now I have to spend time trying to remember all of my custom tweaks before I can even get started on my work. At this rate, I'm going to have to screenshot my setup just so I have a record of my workspace in preparation for the next update that wipes out everything. I thought the whole point of "sync settings" was that a backup was kept of everything so this wouldn't happen.My experience thus far with CC has been that every update breaks something in my workflow.
View 4 Replies
View Related
Apr 16, 2011
I want to take a map of a country and change the shape of it to fit exactly into another complex shape (e.g. a puddle of water, an animal outline, etc).
To be clear, in doing this I don't simply want to mask the original map image to "cut out" the chosen shape, I need to keep the entire map and distort its shape into the new shape. I'm also not talking about using displacement maps to "wrap" the map around a second object. I guess it's a "shape morph" I'm after, which leaves all the original content and just changes the boundaries.
I know I could use the warp tool, but this requires an incredible amount of time to manually change images to exactly fit a new complex shape. It also means every time I want a new shape it has to be manually done. Given that the warp grid only has 9 squares, this makes it even more difficult to get a good match to the new shape.
For example to choose a few points on the original to map to chosen points on the second shape, such that the software will then interpolate the points in between.
View 6 Replies
View Related
Jan 24, 2013
From time-to-time, I seem to have had a temporary printing issue with Photoshop Elements 8, whereby the photo I was trying to print would not be printed completely, but part of it would be cut off, as if the printer's print-head would not be receiving the data from Photoshop past a certain point in one particular plane.
Up to this morning, I had never encountered any printing issue with Photoshop CS6, which I have had, and printed with, for the past 6 months or so. This morning, however, I encountered the same issue, for the first time, using Photoshop CS6. It is now printing properly again, but why do I occasionally encounter this with either software?
When I normally print, I like to print photos to exact sizes, but which vary greatly, and so I prefer the technique of creating a new blank A4-sized document and dragging my photo into this document and, by using Free Transform, size the photo to my exact requirements, before printing onto good quality A4 glossy or sometimes matte paper.
What happened this morning was that, using the technique above, I was trying to print a very small passport-sized photo over to the right-hand side of a sheet of A4 paper, with the blank document in the portrait orientation. My photo was only partially printed, and cut off past a certain point in the horizontal plane. By dragging my photo further towards the centre of the blank A4-sized document and reprinting onto the same sheet of A4 worked fine. After experimenting a little by printing the photo in various places on the same sheet of A4, I discovered that the photo was not printing past a certain point, in the horizontal plane, towards the right-hand side of the sheet of A4.
This cut off point was consistent in every printing attempt. There was a certain point to the right-hand side of the sheet of A4, where, in the horizontal plane, it would simply not print past. By measuring this cut off point in the horizontal plane, it is 4.8cm from the right-hand edge of the sheet of A4, in its portrait orientation.After resetting all tools, turning the PC and printer off and then on again, launching Photoshop CS6 and retrying, it seems to be printing correctly again, and I am able to print my photo anywhere on the sheet of A4, without anything being cut off past a certain point.
View 2 Replies
View Related
Apr 27, 2009
Is there anyway to save out an Alpha Channel Separately from the color? I just want the alpha channel as an image file. How can I do this?
View 1 Replies
View Related
Dec 21, 2005
I really love making icons on Photoshop. I know it would be better to do it in Illustrator but I don't have that yet, so I'm looking for help specifically in Phosohop.
If I have an image with say, for example three layers, and it's 100x100 pixels then I'll usually put a picture in there or whatever. What I want to know, and I've seen this done by other people, is how I delete a part of this picture completely?
What I mean is that if I have a picture up and I want to delete it so that when I post it on the internet I can see the background in that area. I've tried doing this but still I see nothing but the white background. I want to delete that area COMPLETELY.
Is anyone able to help me?
View 7 Replies
View Related
Feb 23, 2014
Just upgraded from PSE9 to PSE12 and in the media browser the dates and star ratings are not displayed. How can I get them back?
View 2 Replies
View Related
Sep 15, 2012
How do I get a completely black background ???
View 5 Replies
View Related
Oct 29, 2012
I have used PSE9 Organizer for some time....when I opened it tonight there is nothing on the right side, but on the left side is a column with list of all the folders in my Picture Library. Tags and albums are all gone.
View 8 Replies
View Related
