Photoshop :: Completely Erased File?
Feb 16, 2012
Its a large file, so i shut down photoshop and then started it back up, like i do all the time. However when photoshop started up again my file i had been working on all week was gone. It could be seen in the recent files, but when i clicked it it said it couldnt find it. So i go to the directory where it should be, and, yup, its gone.
Not in the recycle bin, not anywhere on the drive after many exhaustive searches, and i cant even find it using a disk recovery tool. I have tried recuvra, which took over 2 hours, and nothing. It is completely and absolutely gone, taking away a weeks worth of work with it. I actually need this for tomorrow, but dont have anywhere near enough time to create it from scratch again.
View 9 Replies
ADVERTISEMENT
Oct 30, 2013
I have been working on a file for the last few weeks and save on a very regular basis and also have the autosvae option selected in preferences but Photoshop has crashed and completely deleted the file off the face of the earth?
I am working on a very important project and have a design session very soon and am now left with no .psd file to work with? I have looked for it everywhere and there isn't anything?
C:UsersNameAppDataRoamingAdobeAdobe Photoshop CCAutoRecoverFOLDER IS EMPTY!!
all i have been left with is the psED89.tmp file!
View 6 Replies
View Related
Nov 15, 2012
I created a slide show in Elements 9. the show worked normally when viewed as a slide show, but when saved it as a wmv file, some of the pictures were completely black. How can I correct this ?
View 1 Replies
View Related
Apr 24, 2013
I loaded a linetype (.lin file) in ACAD 2010 and it came out wrong. I would like to permanently remove it from ACAD(where it cant be seen when you go to load another type of line), how do you do that?
View 7 Replies
View Related
Feb 20, 2013
I'll try to write this logically, but as logic has failed to get me the output I want, I suspect somewhere there will be something highly illogical...
I am trying to export a JPEG file, complete with images. I have setup the original file to 2362x602 pixels, at 300 ppi (making a canvas approximately 200x50mm). This is confirmed through Image -> Canvas Size.
Now if I want to print to paper, I can check the settings through Image -> Print Size, to confirm what size I will get.
What I want is to be able to do the same thing for an export jpg function. I need the JPG to come out at a specific dimension, not a specific pixel size. If I export my file now (File -> Export) as a jpg, I end up with a jpeg much wider than 200mm. A quick rightclick->properties shows me the jpg is still 2362x602 pixels, at '300dpi.' So why is that not the size I expect it to be?
View 3 Replies
View Related
Jul 16, 2013
Five minutes ago I installed the latest hot fix. Now, AutoCAD Civil 3D 2014 won't work at all. As soon as I open the program and then try to open a file the system completely shuts down. Everything was working fine until two days ago. Then it wouldn't open the files and said to type in the file name on the command line. When I would do this, it always said file could not be located. I am running Windows 7 Ultimate, have an nVidea GTX 570 card, and an AMD Phenom II CPU. I'm hoping I don't have to uninstall and reinstall again.
View 9 Replies
View Related
Sep 20, 2013
i unistalled photoshop 6 from my computer when i renewed my subscription (i did this cause it wasn't opening) and now i can't download a new version.
View 3 Replies
View Related
Aug 21, 2008
I saved a .psd as a flattened image. Is it possible to retrieve the former version that has all of my layers?
View 1 Replies
View Related
Mar 17, 2008
I use the Eraser Tool to erase part of a picture before posting it in a public forum (for example a License Plate or a face for privacy reasons), is there a way that someone coud later reverse the process digitally and recostruct the erased part? Or is it impossible? Also, many times I see that even if I resize a picture before posting it to a forum that the EXIF info is still there (camera the picture was taken with, time, etc). Is there a way to erase the EXIF info from a Picture?
View 9 Replies
View Related
Oct 10, 2008
For some reason with my Photoshop CS3, the image adjustments; i.e. contrast, brightness, etc. , are completely missing when the image is printed. The image file after saving looks fine on screen in a photo viewer, but when printed, the image reverts back to pre-edited state.
Things like cropping,color and transforming carry over , but the image adjustments don't . This is really strange, you would think that once an edited image was saved, all the changes to it are now permanent no matter what form it's displayed.
How is printing the image reversing the image adjustment editing to the file? Is there some kind of setting that it's in thats making it do this?
View 1 Replies
View Related
Jan 22, 2005
way to recover the deleted area of an image? Say for instance you have an image someone sent to you and part of the image has been erased to hide something so no one could see that part of it. Part of it has been erased and it's just white in that area. Can't you recover that area? I don't know if this is the place to make such a post but I figured it could be done in photoshop.
View 4 Replies
View Related
Jun 30, 2006
to add some color to a black and white photo.
I don't need anything too complicated, so I just added a solid color fill layer and erased everything that wasn't that particular color. However, I erased a bit too much, and instead of adding another fill layer for this one little part, is it possible for me to draw into the layer to add the color back?
I tried taking a black brush and painting into the layer, but nothing happened.
View 2 Replies
View Related
Jun 22, 2012
We have recently installed Photoshop cs6 on two Mac Pros. On one of them, Photo merge is erasing parts of the individual images while stitching. The part of the original image that is covered by masking, is also erased when the mask is disabled. The merged image generally comes out fine, however, this problem can make it much more troublesome if one needs to adjust the combined image.
On the second Mac, Photo merge works the way that it seems to work in all examples I´ve found online - the individual images retain all their pixels under the mask.
The method we´re using is Layout: Auto, with "blend images together" as the only checked box.
View 2 Replies
View Related
Nov 3, 2013
I have eraser tool trimmed all round an item I wish to take out to another photo, so lets say I have a car, round its edge is now an 8 pixel border of transparency, car within, road scene outside, I click the car and get parts of the picture both sides of the erased border , I just want all of the car, or alternatively I click outside the erased border and get bits of the road scene but also bits of the car.
I have tried contiguous on and off, select all layers on and off, different wand tolerances, various combinations,...have I overlooked one that I can wand the road scene and it will select all of it up to the gap around the car ? I can then expand selection a couple of pixels and delete out the road scene.
So far I am left with carefully picking my way around the middle of the border with the straight line selection tool and erasing chunks away that way. Having taken ages to go round the edge of a complex shape , to have no option but to repeat the path with the stright line tool is a pain. I use a variety of brush sizes/settings and quickmask mode to initially select out the item. I should have used the lassoo tool then inverted selection, it doesnt allow for a variety of hardness in one selection and you cant sew what exactly you have got, unlike a pink edge.
Its simple stuff like this that I hope Pshop after many years would have a tool for, as well as all the luxuries/gimmicks.
View 3 Replies
View Related
Jul 25, 2011
I am working on a .Net plugin and need to handle some events. The first one I'm playing with is the ability to prevent a block from being erased. My method for doing this was to add a handler to the database object of the current document, and look for blocks being erased and then check its name/attributes. I realize that the code is buggy and will only work for blocks - but it's currently just a proof of concept. I have hard-coded the block name, and set a check for if the attributes contain "123". It seems to work, but after I un-erase the blocks they don't redraw. I've gotten better results with calling .Draw on the object, but I still have to regen the drawing manually.
<CommandMethod("protectblock", CommandFlags.Session)> _ Public Sub protectblock() Dim currentDocument As Document = Autodesk.AutoCAD.ApplicationServices.Application.DocumentManager.MdiActiveDocument Dim currentDatabase As Database = currentDocument.Database AddHandler currentDatabase.ObjectErased, New ObjectErasedEventHandler(AddressOf callback_ObjectErased) End Sub
[code]....
View 4 Replies
View Related
Feb 15, 2013
The 'oops' command is restoring all objects erased since the start of the session rather than the last one erased.
Is there a setting i'm missing?
View 9 Replies
View Related
Oct 21, 2013
Can you lock a line so that it cannot be moved or erased? Not a layer...a specific line.
View 3 Replies
View Related
Oct 20, 2012
I used Dup Finder (plugin) to find duplicate pictures in my LR catalog. I then erased them through Lightroom. what I didn't realize is that Dup Finder puts both the otiginal file and the duplicate in a smart collection. I errased everything from that folder, so now I have missing photos and I don't know all the file names. Is there any way to recover these photos or at the very least find a history of changed to a catalog or collection (I have online backups of my photos, so if I know the file name, I can get them).
View 1 Replies
View Related
Oct 17, 2011
I was hoping to use find and replace "#" with broken fields in the drawing. but it will not find the # value that the field creates when it is broken. Is the only way to find a broken field a visual check? or is there another way I am not aware of?
View 5 Replies
View Related
Feb 3, 2012
In the last three days, I lost hundreds of treatments. The photos from my folder disappeared with no reason.I have to import them again (they are on the hard drive) and work again on treatments.
I am using LR for years and it is the first time that it happens.
View 9 Replies
View Related
Nov 5, 2012
I set custom white balance for a lot of my photos (I'm a nightclub photographer) as sometimes the colours are so saturated the image becomes unusable. Unfortunately in Lightroom 4 the photos import with the correct WB I have set but when I click on them to develop the settings are changed and the image looks completely awful. I try and adjust the image back to the way I have taken it but it never looks the same....why is Lighroom not recognising the WB settings I set within my 5D?
View 8 Replies
View Related
Nov 19, 2013
Photoshop CS6 was working fine until about an hour ago...now the shortcut it is gone. Looks like the app is gone completely. Went into Creative Cloud and it said CS6 had updates but I am receiving an error code U44M1I210. I am current on payment.
View 2 Replies
View Related
Aug 12, 2012
So my whites and grays and everything are PERFECT everywhere but in Photoshop. Granted I don't have a hardware calibration tool, only software, but I've used nVidia's tool as well as several others, and everything is fine, except when I go into CS5. For example, the whites on this page are perfectly fine. However, in CS5 the white is cream colored.
Is there something specific to CS5 that is independent of my monitor as well as every other application that I own that makes it cream? It didn't used to be like this, so I don't know what changed.
View 2 Replies
View Related
Nov 27, 2012
When I import photos via 'File / Get Photos and Videos / From Files and Folders ...' they appear as individual photos in the 'Getting Media' box but when the import is complete they all appear the same - a grey background with an hourglass figure. How do I get the completed import to display the individual photos?
View 1 Replies
View Related
Jun 20, 2013
My colors are completely off in photoshop from the real image. I've already checked to make sure it's not the monitor, the color is fine there. I've already read the forums that say to simply turn on "Proof Colors." That does changes the colors how they should be. HOWEVER, if I try and export the file out as a png or anything, they are exported with the messed up color rather than the "proof colors." BUT if I open the image up in microsoft paint, it appears to be right, but only with paint. If I open the image with anything else (reader, indesign, picaso, etc.), the color is always messed up. I even tried exporting the png to someone else thinking it was just my computer, no luck. For some reason, I can't export anything without it using crazy colors (just like if "proof colors" was unchecked). I've tried deleting preferance and playing around with the color settings. What can I do?
here's my spects:
Windows 8
2013 Asus Laptop
Photoshop CS6
View 3 Replies
View Related
Oct 11, 2013
When I open ps cc it completely hangs. No menus will open. Cannot even close without using task manager. Should I just reload? How do I delete the old version?
View 3 Replies
View Related
Nov 6, 2008
I have recently installed Photoshop CS3 Extended but there was a problem with the serial number on the box. Adobe have issued me a new serial number to use. I uninstalled it all but when i reinstalled it, the original serial number is still there.
How do i completely remove all traces of Photoshop CS3 Extended from my computer so that i can reinstall it with my new serial number? This is a full retail version used on a Windows XP system.
View 6 Replies
View Related
Aug 9, 2013
Using the square brush set in CS6 results in a sqaure that is, in fact, not really square...
Note how there are 3 90 degree corners, but the bottom right is rounded, and the bottom and right sides are faded.Am I doing something wrong? How can I fix this?
View 1 Replies
View Related
Jul 28, 2013
i have installed CS6 on my vista PC /32 Bit, 4 GB RAM). Problem is, when i open an picture in CS6 this picture is not completely visible on main screen, rest on picture is greyed out. What can be the reason and what can i do?
View 4 Replies
View Related
Sep 9, 2013
So when I booted up this morning and logged into the CC desktop application it told me that there was a Photoshop update available. I installed the update, opened Photoshop, and my workspace no longer exists. All of my custom settings (scratchpad color, menus, docks... EVERYTHING) has been reset to the "Essentials" workspace. And when I tried to "sync settings" to hopefully pull back my custom workspace from the "cloud" it showed that I had never synced before and seemed to have no information to pull from the cloud. So that did absolutely nothing. I had also saved my custom workspace, but it isn't an option to select in the drop-down menu.
Now I have to spend time trying to remember all of my custom tweaks before I can even get started on my work. At this rate, I'm going to have to screenshot my setup just so I have a record of my workspace in preparation for the next update that wipes out everything. I thought the whole point of "sync settings" was that a backup was kept of everything so this wouldn't happen.My experience thus far with CC has been that every update breaks something in my workflow.
View 4 Replies
View Related
Apr 16, 2011
I want to take a map of a country and change the shape of it to fit exactly into another complex shape (e.g. a puddle of water, an animal outline, etc).
To be clear, in doing this I don't simply want to mask the original map image to "cut out" the chosen shape, I need to keep the entire map and distort its shape into the new shape. I'm also not talking about using displacement maps to "wrap" the map around a second object. I guess it's a "shape morph" I'm after, which leaves all the original content and just changes the boundaries.
I know I could use the warp tool, but this requires an incredible amount of time to manually change images to exactly fit a new complex shape. It also means every time I want a new shape it has to be manually done. Given that the warp grid only has 9 squares, this makes it even more difficult to get a good match to the new shape.
For example to choose a few points on the original to map to chosen points on the second shape, such that the software will then interpolate the points in between.
View 6 Replies
View Related
