Photoshop :: Recostruct The Erased Part?
Mar 17, 2008
I use the Eraser Tool to erase part of a picture before posting it in a public forum (for example a License Plate or a face for privacy reasons), is there a way that someone coud later reverse the process digitally and recostruct the erased part? Or is it impossible? Also, many times I see that even if I resize a picture before posting it to a forum that the EXIF info is still there (camera the picture was taken with, time, etc). Is there a way to erase the EXIF info from a Picture?
View 9 Replies
ADVERTISEMENT
Sep 20, 2013
i unistalled photoshop 6 from my computer when i renewed my subscription (i did this cause it wasn't opening) and now i can't download a new version.
View 3 Replies
View Related
Feb 16, 2012
Its a large file, so i shut down photoshop and then started it back up, like i do all the time. However when photoshop started up again my file i had been working on all week was gone. It could be seen in the recent files, but when i clicked it it said it couldnt find it. So i go to the directory where it should be, and, yup, its gone.
Not in the recycle bin, not anywhere on the drive after many exhaustive searches, and i cant even find it using a disk recovery tool. I have tried recuvra, which took over 2 hours, and nothing. It is completely and absolutely gone, taking away a weeks worth of work with it. I actually need this for tomorrow, but dont have anywhere near enough time to create it from scratch again.
View 9 Replies
View Related
Aug 21, 2008
I saved a .psd as a flattened image. Is it possible to retrieve the former version that has all of my layers?
View 1 Replies
View Related
Oct 10, 2008
For some reason with my Photoshop CS3, the image adjustments; i.e. contrast, brightness, etc. , are completely missing when the image is printed. The image file after saving looks fine on screen in a photo viewer, but when printed, the image reverts back to pre-edited state.
Things like cropping,color and transforming carry over , but the image adjustments don't . This is really strange, you would think that once an edited image was saved, all the changes to it are now permanent no matter what form it's displayed.
How is printing the image reversing the image adjustment editing to the file? Is there some kind of setting that it's in thats making it do this?
View 1 Replies
View Related
Jan 22, 2005
way to recover the deleted area of an image? Say for instance you have an image someone sent to you and part of the image has been erased to hide something so no one could see that part of it. Part of it has been erased and it's just white in that area. Can't you recover that area? I don't know if this is the place to make such a post but I figured it could be done in photoshop.
View 4 Replies
View Related
Jun 30, 2006
to add some color to a black and white photo.
I don't need anything too complicated, so I just added a solid color fill layer and erased everything that wasn't that particular color. However, I erased a bit too much, and instead of adding another fill layer for this one little part, is it possible for me to draw into the layer to add the color back?
I tried taking a black brush and painting into the layer, but nothing happened.
View 2 Replies
View Related
Jun 22, 2012
We have recently installed Photoshop cs6 on two Mac Pros. On one of them, Photo merge is erasing parts of the individual images while stitching. The part of the original image that is covered by masking, is also erased when the mask is disabled. The merged image generally comes out fine, however, this problem can make it much more troublesome if one needs to adjust the combined image.
On the second Mac, Photo merge works the way that it seems to work in all examples I´ve found online - the individual images retain all their pixels under the mask.
The method we´re using is Layout: Auto, with "blend images together" as the only checked box.
View 2 Replies
View Related
Nov 3, 2013
I have eraser tool trimmed all round an item I wish to take out to another photo, so lets say I have a car, round its edge is now an 8 pixel border of transparency, car within, road scene outside, I click the car and get parts of the picture both sides of the erased border , I just want all of the car, or alternatively I click outside the erased border and get bits of the road scene but also bits of the car.
I have tried contiguous on and off, select all layers on and off, different wand tolerances, various combinations,...have I overlooked one that I can wand the road scene and it will select all of it up to the gap around the car ? I can then expand selection a couple of pixels and delete out the road scene.
So far I am left with carefully picking my way around the middle of the border with the straight line selection tool and erasing chunks away that way. Having taken ages to go round the edge of a complex shape , to have no option but to repeat the path with the stright line tool is a pain. I use a variety of brush sizes/settings and quickmask mode to initially select out the item. I should have used the lassoo tool then inverted selection, it doesnt allow for a variety of hardness in one selection and you cant sew what exactly you have got, unlike a pink edge.
Its simple stuff like this that I hope Pshop after many years would have a tool for, as well as all the luxuries/gimmicks.
View 3 Replies
View Related
Jul 25, 2011
I am working on a .Net plugin and need to handle some events. The first one I'm playing with is the ability to prevent a block from being erased. My method for doing this was to add a handler to the database object of the current document, and look for blocks being erased and then check its name/attributes. I realize that the code is buggy and will only work for blocks - but it's currently just a proof of concept. I have hard-coded the block name, and set a check for if the attributes contain "123". It seems to work, but after I un-erase the blocks they don't redraw. I've gotten better results with calling .Draw on the object, but I still have to regen the drawing manually.
<CommandMethod("protectblock", CommandFlags.Session)> _ Public Sub protectblock() Dim currentDocument As Document = Autodesk.AutoCAD.ApplicationServices.Application.DocumentManager.MdiActiveDocument Dim currentDatabase As Database = currentDocument.Database AddHandler currentDatabase.ObjectErased, New ObjectErasedEventHandler(AddressOf callback_ObjectErased) End Sub
[code]....
View 4 Replies
View Related
Feb 15, 2013
The 'oops' command is restoring all objects erased since the start of the session rather than the last one erased.
Is there a setting i'm missing?
View 9 Replies
View Related
Oct 21, 2013
Can you lock a line so that it cannot be moved or erased? Not a layer...a specific line.
View 3 Replies
View Related
Oct 20, 2012
I used Dup Finder (plugin) to find duplicate pictures in my LR catalog. I then erased them through Lightroom. what I didn't realize is that Dup Finder puts both the otiginal file and the duplicate in a smart collection. I errased everything from that folder, so now I have missing photos and I don't know all the file names. Is there any way to recover these photos or at the very least find a history of changed to a catalog or collection (I have online backups of my photos, so if I know the file name, I can get them).
View 1 Replies
View Related
Oct 17, 2011
I was hoping to use find and replace "#" with broken fields in the drawing. but it will not find the # value that the field creates when it is broken. Is the only way to find a broken field a visual check? or is there another way I am not aware of?
View 5 Replies
View Related
Feb 3, 2012
In the last three days, I lost hundreds of treatments. The photos from my folder disappeared with no reason.I have to import them again (they are on the hard drive) and work again on treatments.
I am using LR for years and it is the first time that it happens.
View 9 Replies
View Related
Nov 5, 2012
I set custom white balance for a lot of my photos (I'm a nightclub photographer) as sometimes the colours are so saturated the image becomes unusable. Unfortunately in Lightroom 4 the photos import with the correct WB I have set but when I click on them to develop the settings are changed and the image looks completely awful. I try and adjust the image back to the way I have taken it but it never looks the same....why is Lighroom not recognising the WB settings I set within my 5D?
View 8 Replies
View Related
Mar 20, 2007
I'm familiar with different techniques on how to turn a color picture to black and white, but I was curious as to whether or not there were ways to turn color pictures black and white, while certain parts remained in color (like Sin City).
View 6 Replies
View Related
Nov 15, 2011
I set up our company log which gets embossed on most parts as a sketch block in an .ipt. The .ipt contains nothing but the sketch block. To use it, the designer only needs to derive the Logo.ipt file into their part and then use the scale setting to set the derived block to the desired size for that part. The result is a scalable set of line geometry that can easily be used for extrusion or emboss that is standard for all users. It works beautifully, that is until you try to use it in a sheet metal part in 2012.
For some reason, when this same part, which works perfectly in normal parts, is derived into a sheet metal part an error pops up stating that, "Selected part does not have any geometry that can be derived." Say what?
I was able to find a workaround by directly copying the block into the sheet metal part, but you no longer have the ability to go back and scale it if needed. Even more strange, when the block was copied over, it could not be deleted from the new part.
Is this just a bug with 2012? Why does it work in a normal part but not sheet metal?
View 7 Replies
View Related
Mar 28, 2012
Dear Sir, In particular project, when I insert part in Assembly file, It is inserted as a Tube & Pipe run part. so that It is not Grounded automatically. What is the settings by which I can insert as a normal part in assembly file ? I have attached herewith the JPG file also.
View 3 Replies
View Related
Dec 28, 2012
The part i make is from solid model>The part needs to be in sheet metal.What steps do i use to make as sheet metal part and have option to flatten part.
View 1 Replies
View Related
Apr 1, 2013
I`m looking for the iLogic code that can change one parameter (user defined) for each (ipt) part in assembly (iam)
The one below doesn`t work.
Sub Main Dim oApp As Inventor.Application = ThisApplication Dim oAssy As Inventor.AssemblyDocument = oApp.ActiveDocument For Each oSubDoc as Inventor.Document In oAssy.AllReferencedDocuments On Error Resume Next Parameter(oSubDoc, "FH") = 15.26 Next End Sub
View 5 Replies
View Related
Dec 11, 2013
I would like to simplify this assembly into one seamless part for FEM calculation:The assembly consists out of parts that, in reality, will be welded together. Due to their form, there is no way to place them exactly onto each other, therefore there are slight gaps between the parts:
Now when I try to merge the assembly into one part via "simplify" --> "create simplified part" and choose "single solid body with seams between planar faces merged", Inventor does not fill these gaps (even though it displays only one part in the bottom right corner of my window). Unfortunately, the remaining gaps brings "contact" problems in the FEM simulation.
how to close the gaps and really merge the assembly into one part?
View 6 Replies
View Related
Nov 15, 2013
New user 2014
Part created in assembly does not update to part file.
View 9 Replies
View Related
Mar 29, 2012
I have a part that has protrusions. When i mate that part up to another part that second part needs to have cutouts/holes to receive those protrusions.
i mainly use it in sheetmetal parts. and use the rectangular protrusions on de contour to mate up with corresponding cutouts in the other sheet. this works with positioning and also makes for a nice weld spot/area.
But also for making holes to accommodate a mold pin used in custom punch dies. I want the intervening part to receive a corresponding (propperly tolleranced) hole automatically. Much like a bolted connection does.
same for parts like circlips. i want them to automatically generate the seat in the part it's mated to. Rather than using the axle generator.
Ofcourse one can place the parts and do an in assembly interpart projection and go from there, but i want the part to generate the (predifined) modification to the other part. It would save time and also reduces problems as the parts are moved about or even removed.
View 7 Replies
View Related
Jul 1, 2013
I have an assembly with 10 parts in it. We use many assembly features at the assembly level (Revolve cut, Extrusion cut..etc). How to find the mass difference of each part by comparing at its parts level and its assembly level.
View 1 Replies
View Related
May 4, 2012
convert the part that I have drawn to sheet metal. I have tried to make the part from sheet metal and it did not work out at all. I have attached both versions of the part.
View 1 Replies
View Related
Feb 14, 2012
As soon as I open a piece or try to make a new piece, it crashes! I can open the program but can't use it! I installed it and activated it and I can't use the program at all. I have sent many error reports beacuse I have opened it many times and had it crash many times and have always given my email address. Attached is the Error Report Details screen shot.
View 3 Replies
View Related
Aug 29, 2012
In previous releases (2009 i think) when i converted a standard part to a sheet metal part i could recall all the sheet metal styles by linking back to the sheet metal template (i can't remember exactly how this was done, but it was possible with one operation)
In 2011 i canot find a quick way of doing this, it looks like i have to open the sheet metal template and export each different style (about 40 of them) and then import each one into the converted part. am i missing something? is there a simpler way similar to how it used to be done? Why have Autodesk made this more difficult?
As it stands at the moment it would be quicker for me to remodel the parts from scratch using the sheet metal template. I know this is the obvious solution, but seems strange to change something that worked well to something that doesn't!
View 6 Replies
View Related
Oct 23, 2013
I order not to hide components, i want to make a break sketch and remove a piece from a part from an assembly in the isometric view in a drawing. can i do that?
View 4 Replies
View Related
Apr 3, 2013
I have a structrual rectangular tube as shown in the picture below. I need to fold the four flanges inward to create a sort of point or pyramid.
View 9 Replies
View Related
Sep 11, 2013
The simple question is… how can we insert a step (stp) part into an existing part file?
The story behind the question is this:
Normally when we get a step file assembly from a customer, if the part has changed, we put our part into Old Versions and save their new step file as our ipt number and replace it in our assembly file. With Vault, in order for us to maintain the history of the part files, we need to keep the original file so we can’t just delete it or replace it, so now we need to figure out how to get a step file into an ipt. The Import command on the Manage tab (with 2013 at least?) does not allow import of stp files just yet.
The only other option I can think of is to put the original part into an assembly with the step file, create a copy of the step information in the part file and use it to recreate the new (step based) part.
Inventor 2013 (SP2 Update 2), Windows 7 Professional (64-bit), SP1, Intel Xeon 3.07GHz CPU, 12GB RAM, NVIDIA Quadro 2000, Vault Basic 2013
View 1 Replies
View Related
