In Photoshop 6, adjusting brush parameters including hardness was easy, but in Photoshop 7, I can't seem to find where these settings are. I have been through the brush palette several times and have found everything BUT basic brush parameters such as hardness and angle. I cannot imaging where they might have moved this or even if they are still accessable.
View 6 Replies
how to set brush hardness. I'm not looking to change opacity, I want to change how hard the brush presses when you first click.
View 8 Replies View RelatedI can't use the brush tool on brushes other than the round brushes because the hardness option is grayed out. I get the no go error symbol.
View 4 Replies View RelatedIn CS4, holding the ALT key down and right-click-dragging left or right decreases/increases brush size continuously on a PC. Is there a comparable way to tweak brush HARDNESS on a PC as you can on a Mac? I have tried additionally holding down the SHIFT key ala the square brackets alternative method for step-changing hardness, and have also tried all combinations of moderator keys to no avail.
View 6 Replies View RelatedMy platform is WIN 8-64 on a Dell XPS8500 with AMD Radeon HD 7570 graphics card and like many others I have the "flicker" problem but the work-around Advance setting of BASIC works for me. However, I now notice that I cannot set the brush hardness level. I installed the CS6-32 version concurrently and the brush works fine in that version. In CS6-64 the brush set on black will not replace white and when set on black it makes only a gray streak no matter what the hardness setting is.
View 5 Replies View Relateduse i mac i7, lion 10.7.4.
It seems that, in CS6 Photoshop, I could RIGHT CLICK, and a small panel would drop down at cursor location, allowing me to change size, hardness, and roundness of the brush.
I have recently updated to 13.0.1. The technique described above no longer works, but I can't be sure that this happened after the update. I may, as often, have screwed up a preference checkbox.
I'm trying to figure out how you can adjust the exact hardness of a brush. I see that you can select a brush with a hard edge, or a fuzzy edge, but what if I'd like some middle ground?
While I'm at it, I may as well ask another question as well. I'm used to Jasc Paint Shop Pro 8, and on there you could adjust the "step" of a brush. Is there a way to do that on GIMP?
Also, is there a shape tool where you can create spheres or squares?
After upgrading from CS6 beta to CS6 release this function stopped working (on OS X Lion). The only think that happens when I use both keys (Ctrl+Alt) and move the mouse is moving the whole application/cs6 windows.
View 10 Replies View RelatedThe feature where you can quickly change a brush size/ diameter by pressing Alt + hold right click (for Windows) (In Mac, control + alt + left click) is neat but is there any way to change that shortcut to a different combination? I can't find it in the shortcuts list.
View 1 Replies View Relatedin photoshop 7, how do you mess with the Hardness of the brush? I remember in PS6 when you double clicked the brush a pallette would pop up where you could change the size, hardness, angle, roundness .... i cant seem to find the Hardness for brushes in the PS7 pallete ...
View 14 Replies View RelatedI'm still somewhat a noob, but I'm following a tut and it says to make sure the eraser hardness is 0. Problem is.....I can't find where the 'hardness' setting is.
View 7 Replies View RelatedI'm trying to draw some dashed lines in Photoshop, and to this end I've been playing around with the brush settings (Spacing etc). I'm using a square brush, and I managed to draw the dashed line as I want it, with one exception: I can't get the brush to be feathered.
Is it a general thing in Photoshop that you can't change (i.e. soften) the hardness of a square brush, as you can with that of a round brush? I doubt that Photoshop would impose such a limitation - there must be something I'm getting wrong.
I'd really appreciate some help on this. Once again, I'd like to have a soft (i.e. feathered) *square* brush, which I can use for various purposes, including the drawing of dashed lines.
Using Windows Vista 64 Bit Photoshop CS4-64 Bit.
Recently my Hardness slider for my Brush Tools (B) My Blur Tools and my Dodge and Burn Tools have vanished.
I'm trying to draw some dashed lines in Photoshop, and to this end I've been playing around with the brush settings (Spacing etc). I'm using a square brush, and I managed to draw the dashed line as I want it, with one exception: I can't get the brush to be feathered.
Is it a general thing in Photoshop that you can't change (i.e. soften) the hardness of a square brush, as you can with that of a round brush? I doubt that Photoshop would impose such a limitation - there must be something I'm getting wrong.
I'd really appreciate some help on this. Once again, I'd like to have a soft (i.e. feathered) *square* brush, which I can use for various purposes, including the drawing of dashed lines.
I recently upgraded from CS4 to CS6 and I noticed a weird change in how brushes with 0% hardness are displayed. I'm not sure if it's supposed to look like this or if it's a problem with my settings etc.
So here is how it looks on 500%
- 0% hardness brush, Opacity 100%, black on transparent background
- Image Mode is RGB / 8bit
The slider for the brushes hardness is never available. How can adjust/or show availability?
View 5 Replies View RelatedThe brush size on my paint brush and clone stamp are not working properly.
View 1 Replies View Relatedyou can see what i mean in the following picture examples.
Selecting a brush (any 1 pixel) brush
[URL]........
shows my selection . Drawing a straight line
[URL]........
Zooming in to the line (600%) you can see i can draw a marquee through half of it ...
[URL].........
No matter what 1 single pixel brush i use this will happen... no matter which computer i use cs6 on and different copies of the installation. Anyway have any insight into this? frankly... it's somewhat limiting that i can't use the brush for stroking a shape if i need a pixel line and yet soft curves that a pencil won't get you.
I am not very good with photoshop, and if there was a brush tool setting to make it just like an actual paint brush.
View 1 Replies View RelatedWhen i pick my brush tool and try to get a soft brush from the drop down menu they all look white, i don't see a soft brush from a non soft brush.
View 2 Replies View RelatedThe brush preview size does not match brush stroke. I've insert a pic of the problem. I tried allmost everythning, but nothing works.
I use a wacom tablet.
I'm a web developer but have little knowledge of Photoshop. I got a web design job to create something very similar to URL.... Firstly i want to know how to make a brush mild like the white brush on that website. It doesn't overshadow the blue background.
View 1 Replies View RelatedThere are a few things I just don't get about brush settings. Sometimes it seems my brushes go all wonky.
When I change the settings for 1 brush... say I add some jitter to a smooth brush - then suddenly the other brushes get the same jitter applied to them.
How can I set the brushes so that each brush has a different setting that doesn't change when I change any other brush settings?
p.s. I also don't get why Adobe has you lock a brush by UNlocking it? Seems to me it should be the other way around?
I have contacted Adobe about issues with Photoshop brushes recently. My issue is that the brush size is smaller than the circle that represents the brush. In other words, when I hoover over the area that I want to paint or erase with the circle and then click, the painted or erased area is smaller that the circle. It's really frustrating when fine tuning an image, you never know how close you are to what you want to correct. This is only visible when you zoom in quit a bit. I worked with an Adobe tech for over an hour and he could not simulate the problem. Then he finally asked if I was using a retina display, (he was not).
View 4 Replies View Relatedthe brush, stamp brush and eraser tools are giving me a hard time the actual working area from the tool is so much smaller than the outside frame of it URL....
i'm using cs6.the picture i'm working with was enlarged to 400%.the brush, stamp brush tool was at size: 12px, hardness 100%.opacity 100%
in the presettings i saw the brush was set to normal size.also i played with the jitter sizes, to no avail.
When I use the Adjustment Brush in Camera Raw it frequently just gives me a pin instead of a brush. How can I fix this? I'm on a Mac in Snow Leopard.
View 4 Replies View RelatedI tried defining a new brush but the sample doesn't recognize color and texture. Is there a way of sampling a small piece of a drawing and making a brush out of it? With the multi colors of the sample?
View 3 Replies View RelatedWhen I use the healing brush is tends to "skip". It leaves a line of circles like a stamp would instead of a flowing line like it should leave. No matter how slow I move the brush it leaves a circle and then as I continue to draw nothing happens until I reach the edge of the first circle, it then drops another circle and it continues that way as long as I draw with it. The brush tool works fine, leaves a smooth line. The Spot Healing and Patch Tool work fine but the healing brush will not heal in a smooth stroke. It skips along a leaves a tail of circles the size of the brush. I am using a fast computer, i7 processor, 16bg ram and a SSD drive so I do not think speed is an issue. I upgraded from CS4 where the healing brush worked fine on this computer
View 3 Replies View RelatedHi, I'm having some issues with my brush. It won't brush any other color, I select different colors on "set foreground" and "set background" colors and no matter what I select it brushes white. Does anyone know why?
View 2 Replies View Relatedthe size of the brush at the Brush Mask Tool can not be changed when I pressing the Shiftbutton
X6.4 - Win7
Is there any way to add a favorite brush stroke to the list of brush strokes, or do you always have to open the original file to access the brush stroke?
View 9 Replies View Related
