Photoshop :: Adding A Hit Counter, How?
Feb 6, 2005I want to add a hit counter to my webpage ,please tell how to do it ?
View 5 Replies
ADVERTISEMENT
GIMP :: Adding Frame Number Counter To GIFs
Mar 2, 2012I'm in the process of making several .gifs that I would love to add a frame # counter.
Is there any way to add a frame counter to .gifs?
Photoshop :: Twirl Counter-Clockwise?
Jan 10, 2006I'm using the liquify tool to fit a fake tattoo to a face, and I want to twist part of the tattoo to adjust for perspective. Unfortunately, the twirl tool in liquify is in fact a "Twirl Clockwise" tool- Counter Clockwise doesn't seem to be an option!
View 5 Replies View RelatedPhotoshop :: Counter Strike Spray
Jul 24, 2005I have a 256x256 image I want to use for my counter strike spray.
When I spray the image the background is white, I just want the outline of the Counter Terrorist to show but I just carnt figure out how to do it.
how to make an image background clear so only the outline shows?
VideoStudio :: How To Insert A Time Counter
Jan 16, 2011I took some film of some wrestling matches. I want to share it with the coaches so they can use it for training. I would like to have a 'time counter' in the corner some where for easy reference so they can fast forward or reverse as desired. Is there a way to do that?
View 2 Replies View RelatedRevit :: How To Generate Counter Elevations
Feb 10, 2014I am trying to generate counter elevations from my Revit Model. I am designing a coffee bar area and have developed a Revit family for a "U" shaped counter. In trying to set up my elevation, I notice my elevation views of the inside right or indise left of the "U" shaped counter are blocked by the opposite leg of the counter.
Also, I am trying to generate an elevation of my rear support counter and it seems to be blocked by the bottom of the "U" shaped counter. I have attached a sketch of the plan view of where I have set up my elevation views.
Revit :: Transaction Counter With Roll-down Shutter
Jan 27, 2012When I am placing a roll-down shutter family in the same wall and same place as a transaction window family that is the same size gives me an error stating the family is not cutting anything and has to be deleted. How do other people do this?
View 1 Replies View RelatedIllustrator :: Crop Marks Counter Intuitive?
Jun 11, 2013Is it not counter intuitive to include the crop marks of an object in the transform dimensions. i.e If I create a box 200x200mm and turn on crop marks the new dimension is 238.1x238.1mm. I can understand a stroke affecting the dimensions of an object but crop marks? I'm not feeling it, I have to remove crop marks from the appearance, change size of the object then re-apply crop marks.
View 2 Replies View RelatedCorelCAD :: Can't Do 3D Pattern Counter Clockwise With Angle Less Than 360 Degrees
Apr 5, 2013When using 3D pattern, and specifying a negative angle for counter clockwise, with an angle less than 360 degrees ( eg, 90 degrees ) the pattern will be spread over 360 degrees anyway.
Also, the directions in the application are wrong. negative angles are for counterclockwise, not clockwise.
Workaround: Make all patterns clockwise, and reverse the direction of the axis around which it rotates. This will achieve the desired outcome.
AutoCAD .NET :: Rotate UCS About 90 Angle Counter Clockwise And Zoom
Apr 9, 2013I have this
Matrix3d cur = ed.CurrentUserCoordinateSystem;
Vector3d x = new Vector3d(1, 0, 0);
Vector3d y = new Vector3d(0, 1, 0);
Point3d o = new Point3d(0, 0, 0);
[Code] .....
Code is rotating well my model, but it's zooming to bad point. I want to zoom to the point from previous view, so I'm transforming it by new UCS - unfortunately something is going wrong (it's not this point what I want).
AutoCAD Inventor :: Virtual Memory Counter Won't Refresh
Jan 3, 2012I'm currently using Inventor Professional 2012, and have been experiencing problems with virtual memory usage. In past versions of Inventor, the small bar graph counter at the bottom right-hand corner of the screen (Virtual memory counter? Not sure what to call it...) would "re-fresh" after closing a model, drawing, etc. (i.e. Once closing the file, the counter would change from yellow to green, bringing the virtual memory usage back to zero). However, this isn't happening with 2012, and I'm not sure if the problem is the way Inventor was installed onto my workstation, or if it's a problem with the hardware. A temporary solution has been to shut down Inventor when the bar graph gets too far into the yellow range (or red), and then starting up Inventor again.
Specs for my workstation are as follows: Windows 7 (32-bit), processor is Intel(R) Xeon(R) CPU W3503 @ 2.4GHz 2.39GHz, 3GB RAM.
AutoCAD Inventor :: Dump The Counter Of Parameters Of Model?
Feb 11, 2013how to dump the counter of parameters of model:
d0, d1, d10, d12
became
d0, d1, d2, d3
AutoCAD Inventor :: ILogic Sketch Curve Counter
Apr 17, 2013Much of our work is structures fabricated from steel plate. One of our practices is to add a note " (SK) " to the description of plates that have a detailed sketch somewhere in the fab drawing set (simple rectangular or circular plates with no additional features do not get these detailed sketches). The actual "detailed sketch" is just a dimensioned drawing view of that plate.
I've been working on automating this process so that Inventor can actually determine for the user whether or not the sketch is required. I have it in certain part templates by default. Other templates add the note automatically through iLogic when certain plate features are selected, or when the model consists of multiple part features.
This leaves one remaining case that the current set of rules can't catch - when the user creates cutouts, notches, etc. by modifying the sketch for the original extrusion. I have determined a method for catching that case, but haven't yet figured out how to program it.
What I want to do is count all of the lines, arcs, and circles in the first model sketch. If that count returns a number other than 4 lines, the note will be added. If any arcs are detected, the note will be added. If any circles are detected with lines also present, the note will be added. There may be other cases that will come up in testing that need to be covered, but I ran into an issue before I got that far. Construction geometry messes up the count - I need a way to exclude it.
Below is the test code I have so far for the counter. what techniques I can use to get construction geometry out of the count. This code doesn't include the provisions for actually adding the note yet - I'm just trying to get the counter working right first. Instead it's just displaying the total count in a message box for test purposes.
oDoc=ThisDoc.Document
oSketch=oDoc.ComponentDefinition.Sketches.Item(1)
LineCount=oSketch.Sketchlines.count
CircleCount=oSketch.SketchCircles.count
ArcCount=oSketch.SketchArcs.count
TotalCount=LineCount+CircleCount+ArcCount
MessageBox.Show("Total Count "&TotalCount, "Title")
AutoCAD Inventor :: Simulation Testing Counter Balances On Fabrications
Dec 5, 2012In inventor 2013 simulation what is the way to test a fabrication for counter balanced weight stability?
If you see the enclosed rough assembly. I have been playing with variouse stuff and not getting the results i want.
The idea is to work out how much weight the arm will hold without tipping over. and then by increasing the base size and weight or arm length i can then work out the ultimate design for my needs.
The way i want it to work is so that the base is just sitting on the floor as in real life with gravity and weight keeping it there and then as i apply weight to the arm see the tipping or load effect.
This upload is simple and i constrained the base via an axis on the edge put as soon as i run the symulation it just tips over and it shouldnt?
I have tried many other things but get a variety of results like the base suddenly flying off and a thousand miles an hout due to the contacts used ?
AutoCAD Inventor :: How To Dimension Counter Bores On Both Sides Of A Plate
May 9, 2013Any way to show clearly that there are counter bores on both sides of a plate. It does show the dotted lines for when it is on the down side of the plate, but in some sections i have a counter bore of the same diameter on both sides of the plate. Is my best bet just to to create two drawings of the upper and lower faces?
Also i've been trying to use the hole tables, something thats new to me, and i can get all the holes coming up, but im unable to get them to show up as actual counter bores, instead it shows up as two entries.
AutoCAD Visual LISP / AutoLISP :: Add Counter For Layer Changing
Mar 29, 2012i have this LISP as attach...at moment it works like this as below:-
1) Activate the LISP
2) Automatic select all the preset block name in the lisp and change to a pre-set layer
3) LISP end
Now i wish it to be like this:-
1) Activate the LISP
2) Automatic select all the preset block name in the lisp and change to a pre-set layer
3) At command prompt, will state out " n block have been change to layer Eye Bolt"
4) LISP end
AutoCAD Inventor :: Information Regarding Counter Shrunk Holes Exposed In API
Oct 28, 2013what information regarding countersunk holes is exposed in the Inventor API? Can we extract individual values for the countersink diameter, the countersink angle and the through/straight hole diameter and depth?
While I'm at it, is there an in-depth reference document (PDF) for all of this information. The only thing I could find was an image of the object model but that only gets you so deep and doesn't have an explanation of any of the properties shown on the chart. (I tried searching for various hole-related properties shown on the chart and got zip.)
VideoStudio :: Unable To Make Stills / Change Time Counter To 24 Frames
Jul 9, 2011I am trying out my new cam which can do video in 24p (23.something), and I can edit the clips, all ok. There are just two things I cannot do: Make a still (it's really the 24p material, I used a clip in 60i and stills worked), and changing the time/frame counter to 24 frames. No matter what I do, it will always stay there.
View 6 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Additional Counter For Layer Dimension
Aug 22, 2011if my attach lisp can add sort of counter that how many dimensions, leader and multileaders have been move to layer "dimension"...
View 9 Replies View RelatedAutoCAD Inventor :: Testing A Counter Balanced Design In Dynamic Simulation
Apr 17, 2012If i want to see how stable a design is before it tips over after adding counter balanced weights etc. How would i set this up in dynamic simulation?
what i want to do is to mess about by distributing weights at key points to see how the model behaves / how stable it is, and i want to test it until it falls over, this will enable me to test it to it's limits.
I assume i need to place the design on a surface / floor with gravity on and set to the floor. it must be free standing initially.
the item needs to sit on the floor but must not be held back by any constraints so what contact do i use, would it be a spatial contact between the floor and the base component?
Lightroom :: Counter To Show Number Of Flagged (rated Or Labeled) Photos In Folder Or Selection
Aug 22, 2013Is there somewhere in the interface that shows a counter of the number of flagged (or rated or labeled) photos in the folder or selection?
There must be, but I just don't see it or must have turned it off.
Just to be clear... For example, I have a folder with 150 images; I've flagged 37 of them; rated 25 two stars and 15 red label. Is there some counter or other way to see at a glance just how many there are filtered?
Photoshop :: Make A "counter" For My Site?
Apr 6, 2004I want to put a counter on my site, to keep track of foot traffic and I was curious can I download ones and use them on my site or am I going to have to make one? I would actually like to make one looking something like this...
A little differnt to work for my purpose, but does any one know how I would go about making a counter or am I better or using one that someone has already made?
AutoCAD Visual LISP / AutoLISP :: Polyline Clockwise / Counter Clockwise
Mar 23, 2010How can i test a polyline if its clockwise or counterclockwise? I have a routine that gets the area of polylines then if clockwise,the area is positive and negative if not. But I dont want to get the area just to test if its clockwise or not.
View 9 Replies View RelatedAutoCAD .NET :: Numbering Closed Polyline Clockwise Or Counter Clockwise
Nov 29, 2013I have some closed polyline in a rectangular area like below screen shot. I want numbering these polylines counter clockwise or clockwise by selecting a reference polyline. In the below screen shot , I have highlighted a polyline (red marked). So , first I select that polyline and ask to numbering other polylines in couter clockwise.
The result of my requirement should be like below screen shot. how to do that? sample code in VB
AutoCAD Civil 3D :: Deriving Counter Clockwise Azimuth From Clockwise
Jul 28, 2013Deriving “counter clockwise” azimuth from “clockwise,I’m wondering if there is a technique to automatically derive the counter clockwise azimuth from the clockwise or vice versa.
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
AutoCAD .NET :: Polyline Direction (clockwise Or Counter Clockwise)
Sep 7, 2013I am trying to set up the bulge for a polyline, in order to set up the bulge currecty I need to know if the polyline was created clockwise or counterclockwise.
View 4 Replies View RelatedPhotoshop :: Adding A .gif To A .jpg
Feb 1, 2008I'm working on a website for our facility and I'm trying to put an animated .gif flag on the flagpole in a .jpg. I have no problem getting the .gif image on there it's just that the .gif won't animate when I save the picture and add it to my web page.
View 6 Replies View RelatedPhotoshop :: Adding Font To CS5?
Feb 6, 2013I want to add a font to Photoshop CS5. The font name is Futura Medium. I can purchase this font at Fonts.com Will I be able to add this to CS5
View 4 Replies View RelatedPhotoshop :: CS5 Adding Notes
Feb 24, 2012I just recently found out about the "Adding Notes" feature in CS5. I was able to add notes. However, when I saved the photo as a jpeg, and then re-opened it -the notes were not there.
Am I doing something wrong or will notes only re-appear when the photo file is saved to a psd or tif?
Photoshop :: Adding A Render
Jan 21, 2008ok, I need some help. When I make a sig it just looks like I went off to google and slaped a render(picture of something) onto my sig (which I don't, I use planetrenders but thats beside the point). I want to know how I can make the image I want on my sig to blend in more....
View 1 Replies View RelatedPhotoshop :: Adding Guidelines
Jun 17, 2009I was just wondering how i add guide lines in photoshop CS4. Say i have a image.psd open that has guide lines already on it, how can I add more guide lines for when I am doing my slices.
View 4 Replies View Related