I want to put a counter on my site, to keep track of foot traffic and I was curious can I download ones and use them on my site or am I going to have to make one? I would actually like to make one looking something like this...
A little differnt to work for my purpose, but does any one know how I would go about making a counter or am I better or using one that someone has already made?
I am trying out my new cam which can do video in 24p (23.something), and I can edit the clips, all ok. There are just two things I cannot do: Make a still (it's really the 24p material, I used a clip in 60i and stills worked), and changing the time/frame counter to 24 frames. No matter what I do, it will always stay there.
View 6 Replies View RelatedI'm building a flash site and i'm trying to make that nice smooth and rounded outline (just a simple dark grey line with rounded edges) to put in the background
I cannot seem to do this! I feel very stupid, as i'm not actually bad with photoshop. I've made a 750x450 photoshop file and just cant get it to look nice.
Does someone have a simple method for this? How can i do it to the very maximum size that will fit on the 750 450 doc?
the perfect example is of the main flash part of the macroedia site here here
I'm trying to make a layout for a site that requires the height in the file name.So I was wondering if paint.net had a function similar to this picture (photoshop) or is there any other way to measure height?
[URL]......
I want to add a hit counter to my webpage ,please tell how to do it ?
View 5 Replies View RelatedI'm using the liquify tool to fit a fake tattoo to a face, and I want to twist part of the tattoo to adjust for perspective. Unfortunately, the twirl tool in liquify is in fact a "Twirl Clockwise" tool- Counter Clockwise doesn't seem to be an option!
View 5 Replies View RelatedI have a 256x256 image I want to use for my counter strike spray.
When I spray the image the background is white, I just want the outline of the Counter Terrorist to show but I just carn’t figure out how to do it.
how to make an image background clear so only the outline shows?
I took some film of some wrestling matches. I want to share it with the coaches so they can use it for training. I would like to have a 'time counter' in the corner some where for easy reference so they can fast forward or reverse as desired. Is there a way to do that?
View 2 Replies View RelatedI am trying to generate counter elevations from my Revit Model. I am designing a coffee bar area and have developed a Revit family for a "U" shaped counter. In trying to set up my elevation, I notice my elevation views of the inside right or indise left of the "U" shaped counter are blocked by the opposite leg of the counter.
Â
Also, I am trying to generate an elevation of my rear support counter and it seems to be blocked by the bottom of the "U" shaped counter. I have attached a sketch of the plan view of where I have set up my elevation views.
When I am placing a roll-down shutter family in the same wall and same place as a transaction window family that is the same size gives me an error stating the family is not cutting anything and has to be deleted. How do other people do this?
View 1 Replies View RelatedIs it not counter intuitive to include the crop marks of an object in the transform dimensions. i.e If I create a box 200x200mm and turn on crop marks the new dimension is 238.1x238.1mm. I can understand a stroke affecting the dimensions of an object but crop marks? I'm not feeling it, I have to remove crop marks from the appearance, change size of the object then re-apply crop marks.
View 2 Replies View RelatedWhen using 3D pattern, and specifying a negative angle for counter clockwise, with an angle less than 360 degrees ( eg, 90 degrees ) the pattern will be spread over 360 degrees anyway.
Also, the directions in the application are wrong. negative angles are for counterclockwise, not clockwise.
Workaround: Make all patterns clockwise, and reverse the direction of the axis around which it rotates. This will achieve the desired outcome.
I have this
Matrix3d cur = ed.CurrentUserCoordinateSystem;
Vector3d x = new Vector3d(1, 0, 0);
Vector3d y = new Vector3d(0, 1, 0);
Point3d o = new Point3d(0, 0, 0);
[Code] .....
 Code is rotating well my model, but it's zooming to bad point. I want to zoom to the point from previous view, so I'm transforming it by new UCS - unfortunately something is going wrong (it's not this point what I want).
I'm currently using Inventor Professional 2012, and have been experiencing problems with virtual memory usage. In past versions of Inventor, the small bar graph counter at the bottom right-hand corner of the screen (Virtual memory counter? Not sure what to call it...) would "re-fresh" after closing a model, drawing, etc. (i.e. Once closing the file, the counter would change from yellow to green, bringing the virtual memory usage back to zero). However, this isn't happening with 2012, and I'm not sure if the problem is the way Inventor was installed onto my workstation, or if it's a problem with the hardware. A temporary solution has been to shut down Inventor when the bar graph gets too far into the yellow range (or red), and then starting up Inventor again.
Specs for my workstation are as follows: Windows 7 (32-bit), processor is Intel(R) Xeon(R) CPU W3503 @ 2.4GHz 2.39GHz, 3GB RAM.
how to dump the counter of parameters of model:
d0, d1, d10, d12
became
d0, d1, d2, d3
Much of our work is structures fabricated from steel plate. One of our practices is to add a note " (SK) " to the description of plates that have a detailed sketch somewhere in the fab drawing set (simple rectangular or circular plates with no additional features do not get these detailed sketches). The actual "detailed sketch" is just a dimensioned drawing view of that plate.
I've been working on automating this process so that Inventor can actually determine for the user whether or not the sketch is required. I have it in certain part templates by default. Other templates add the note automatically through iLogic when certain plate features are selected, or when the model consists of multiple part features.
This leaves one remaining case that the current set of rules can't catch - when the user creates cutouts, notches, etc. by modifying the sketch for the original extrusion. I have determined a method for catching that case, but haven't yet figured out how to program it.
What I want to do is count all of the lines, arcs, and circles in the first model sketch. If that count returns a number other than 4 lines, the note will be added. If any arcs are detected, the note will be added. If any circles are detected with lines also present, the note will be added. There may be other cases that will come up in testing that need to be covered, but I ran into an issue before I got that far. Construction geometry messes up the count - I need a way to exclude it.
Below is the test code I have so far for the counter. what techniques I can use to get construction geometry out of the count. This code doesn't include the provisions for actually adding the note yet - I'm just trying to get the counter working right first. Instead it's just displaying the total count in a message box for test purposes.
oDoc=ThisDoc.Document
oSketch=oDoc.ComponentDefinition.Sketches.Item(1)
LineCount=oSketch.Sketchlines.count
CircleCount=oSketch.SketchCircles.count
ArcCount=oSketch.SketchArcs.count
TotalCount=LineCount+CircleCount+ArcCount
MessageBox.Show("Total Count "&TotalCount, "Title")
I'm in the process of making several .gifs that I would love to add a frame # counter.
Is there any way to add a frame counter to .gifs?
In inventor 2013 simulation what is the way to test a fabrication for counter balanced weight stability?
If you see the enclosed rough assembly. I have been playing with variouse stuff and not getting the results i want.
The idea is to work out how much weight the arm will hold without tipping over. and then by increasing the base size and weight or arm length i can then work out the ultimate design for my needs.
The way i want it to work is so that the base is just sitting on the floor as in real life with gravity and weight keeping it there and then as i apply weight to the arm see the tipping or load effect.
This upload is simple and i constrained the base via an axis on the edge put as soon as i run the symulation it just tips over and it shouldnt?
I have tried many other things but get a variety of results like the base suddenly flying off and a thousand miles an hout due to the contacts used ?
Any way to show clearly that there are counter bores on both sides of a plate.  It does show the dotted lines for when it is on the down side of the plate, but in some sections i have a counter bore of the  same diameter on both sides of the plate.  Is my best bet just to to create two drawings of the upper and lower faces?
Also i've been trying to use the hole tables, something thats new to me, and i can get all the holes coming up, but im unable to get them to show up as actual counter bores, instead it shows up as two entries. Â
i have this LISP as attach...at moment it works like this as below:-
1) Activate the LISP
2) Automatic select all the preset block name in the lisp and change to a pre-set layer
3) LISP end
Now i wish it to be like this:-
1) Activate the LISP
2) Automatic select all the preset block name in the lisp and change to a pre-set layer
3) At command prompt, will state out " n block have been change to layer Eye Bolt"
4) LISP end
what information regarding countersunk holes is exposed in the Inventor API? Â Can we extract individual values for the countersink diameter, the countersink angle and the through/straight hole diameter and depth?
While I'm at it, is there an in-depth reference document (PDF) for all of this information. Â The only thing I could find was an image of the object model but that only gets you so deep and doesn't have an explanation of any of the properties shown on the chart. Â (I tried searching for various hole-related properties shown on the chart and got zip.)
if my attach lisp can add sort of counter that how many dimensions, leader and multileaders have been move to layer "dimension"...
View 9 Replies View RelatedIf i want to see how stable a design is before it tips over after adding counter balanced weights etc. How would i set this up in dynamic simulation?
what i want to do is to mess about by distributing weights at key points to see how the model behaves / how stable it is, and i want to test it until it falls over, this will enable me to test it to it's limits.
I assume i need to place the design on a surface / floor with gravity on and set to the floor. it must be free standing initially.
the item needs to sit on the floor but must not be held back by any constraints so what contact do i use, would it be a spatial contact between the floor and the base component?
I want to create a background for a site which is like a laboratory table, with test tube etc on the table.
View 5 Replies View RelatedIs there somewhere in the interface that shows a counter of the number of flagged (or rated or labeled) photos in the folder or selection?
Â
There must be, but I just don't see it or must have turned it off.
Â
Just to be clear... For example, I have a folder with 150 images; I've flagged 37 of them; rated 25 two stars and 15 red label. Is there some counter or other way to see at a glance just how many there are filtered?
The people I'm working for wanted a (huge) banner for their website. So far their site actually has fairly decent look. It's very clean and has moderately saturated blues with white text. So this is what I made this for them.
However they wanted me to adjust it, and it ended up looking like this. Is it just me or is the newer design very tacky? I didn't like the hugeness of the first one, and they ended up wanting it even bigger...
I haven't suggested going back to the old one yet because I'm waiting to hear what other people think.
It's just getting frustrating because their instructions through this whole thing have been incoherent. And it ends up in me having to remake something... and the updated version usually looks worse. It's almost like they don't like my designs because they didn't come up with them.
I have a site created in photoshop with image ready. Is there a way to change it so that it loads easier, other than rewriting the entire site. Can it be re-created in another program like Golive?
View 2 Replies View RelatedI heard that after you splice your photoshop document you can hit save for web and it will put all the images in a folder, but when i do that and upload it, the images will not work!
View 4 Replies View RelatedI am in the process of designing a web site and would like to know if anyone knew of a tutorial online I could use to help me with my project?
View 5 Replies View RelatedUnder some circumstances, whenever I open the color dialog (maybe others can't remember) for some reason I don't know Photoshop opens the Help Site in a browser... it does not just once, but maybe dozens of times.
Â
This is an annoying bug that has existed for many Photoshop versions. Keyboard layout is Icelandic.
I have made a curved shape to be used as a "rounded corner" on a section of a webpage. Background is white and the curved bit is #09b (0:153:187). However, when I use the url ( I called it corner.gif) in the CSS, the image, on the actual page, is a slightly different color: 44:154:181.
How should I have all the various color settings set up - for example, what should I have ticked in View/Proof Setup? I have been trying various things so that the color of the image in Photoshop is the same as when I put it on the page, with no success.