I've made a fairly extended action that consists of several groups/folders. Unfortunately, the action leaves one group in particular open, and I would prefer it closed.
I woud simply extend the action by one step, that of closing the group; but clicking the open/close triangle seems not to be a recordable step.Nor can I find a menu option.How can I record the closing of a group?
I'm using Photoshop Elements 11 Organizer and Adobe Bridge CS6 concurrently. If I have Bridge open to the same folder as PSE Organizer and I do an "Add captions ..." operation to a group of files selected in the Organizer, then there is a very good chance that PSE Organizer will rename one or more files to OriginalFileName_edTMP-1.extension and leave the renamed file in the directory rather than completing the update and returning the file(s) to their original name. In most cases my original files are Nikon .nef files with .xmp sidecar files, but I've also seen this happen with .psd files. The .nef files are generally large, averaging 35 Mb per .nef image and the .psd files are usually over 100 Mb. If PSE Organizer and Bridge are open to different folders then Organizer does not leave the renamed file. logical threading error in PSE Organizer where it does not consider that another application may be monitoring the folder and also opening the files, which is what Bridge does when it discovers that a file has changed (the addition of a caption changes the file contents.) This was also a defect in PSE Organizer 10.
View 3 Replies View RelatedWhen X7 and its Group Editing mode first came out, there were grumblings about the "Closing Document" dialog that appears when clicking on the little "X" found on the Edit Inside tab.
I am sure most folks have found that can all be bypassed (assuming you want to keep the edits you just made). But for those that haven't, simply click the Save Icon in the Standard Toolbar.
In Bridge, I can go to tools > Photoshop > Batch and select a Photoshop Action to apply to some group of photos. Can I do this in Lightroom?
View 2 Replies View RelatedDownloaded lightroom with no problem. When I try to download photoshop and bridge I get a message saying to close bridge which is not open. Tried shutting down and started over to no avail.
View 1 Replies View RelatedAnytime open a file, Any file and then close Photoshop, Photoshop crashes before it has completely closed, I'm using Photoshop CS6 extended v13.01 x32 on Windows 7
View 1 Replies View RelatedI am trying to install the cs6 update and it keeps telling me to close bridge.exe...it isn't open. what do I do?
View 3 Replies View RelatedI use my photoshop daily and have about 50000 images on my computer so very much need the bridge to be able to view them all and select the ones I want. for the past few days I have been getting "photoshop has encountered an error and needs to close" every time I try to open a file through bridge, quite often I also get the same error message on the bridge as well a few seconds later.
I have tried reinstalling photoshop, I even tried deleting all the presets which I have added over the years and trying it straight from the reinstall, it still does the same,
I have purchased CS6 and I am having problems with the 64-bit version. After I open it completely freezes and I have to force close it. This happens every time I open it. I have tried uninstalling and re-installing it multiples times. I didn't have this issue with CS5. I am running this on a Mac 10.6.8, Processsor 2.8 with 8GB memory.
View 7 Replies View Relatedhow I can easily find openings in a spline and/or overlapping vertices and edges that prevent the extrude modifier from working correctly? I very frequently need to import .DWG's and .AI's and many times they have hundreds of vertices. Even after I apply a normalize spline modifier to diminish the vertex count, it can be quite tedious to find breaks and overlaps. I find fiddling with the weld verts also to be a pain (usually removes more vertices than I want). I just want to graphically see it on the screen the problematic areas if possible. Attached is a good example. I can easily see on 2 of the splines the yellow vertex to signify start/finish but on the 3rd spline I don't see anything. There are 2 vertices in the same spot and it looks like 1 white vertex. I've never really used Xview but I'm probably not using it correctly. When I use it I get a bunch of green vertices that aren't in any way overlapping.
View 2 Replies View RelatedI need to copy and rename my current drawing then open the copied drawing, and I need to close the original drawing.
However when I try to both open the renamed drawing and close the original drawing (in the code below), the original drawing will not close.
If I don't open the renamed drawing, the following code works and I can close the original drawing.
[CommandMethod("TestClose", CommandFlags.Session)] public void TestCloseDocument() { string fullName = Autodesk.AutoCAD.ApplicationServices.Application.DocumentManager.MdiActiveDocument.Name; string projectDirectory = System.IO.Path.GetDirectoryName(Autodesk.AutoCAD.ApplicationServices.Application.DocumentManager.MdiActiveDocument.Name);
[Code] .....
When I close one page, it's VERY slow to allow me to open another...
View 2 Replies View RelatedClose font.gif
I have a close font but the 'g' needs to be open as in Arial.
I'm wondering if there is a way to either close or hide an open form with iLogic? Something like the opposite of iLogicForm.Show.
View 2 Replies View RelatedI had Inventor 2013 and it worked well for a long time, I didn't use it for a while, then yesterday I tried to use it again and it wouldn't work. It starts up fine, and gets to the menu where you can choose from recent files, new files, tutorials, etc. After I select anything to open, whether its a new or old file, the program will load open the file then immediately stop working. No error message is displayed besides Windows telling me "this program has stopped working". I updated to 2014 yesterday, and the exact same problem persists.
View 9 Replies View RelatedTo print all open windows in Illustrator CS5 (or illustrator files in a folder) then close the files.
View 12 Replies View RelatedIs it possible to put as part of an action 'open the file that's selected in the file browser'. At the moment I select files and then run a batch process, or open the file and then run an action, but can I skip that stage?
What I have in mind is being able to look over the file browser to see which action each file needs to have run, but to be able to just click an action button and for it to open that file and run the action, etc.
I use CorelDRAW on a daily basis and recently the program takes a lot of time to open/close/save my files, or sometimes it'll simply freeze.
View 6 Replies View RelatedIs there a way Autocad could just do what I asked for, and nothing more?A few examples
- After publishing, the publish dialog auto closes. I don't wat that. After publishing dwf I also want pdf.(I know you can save the list, that's not the point. If you didn't close the dialog I wouldn't need it)
- When selecting a hatch, the ribbon automatically jumps to Hatch Editor. I don't want that. Maybe I just want to change the layer. I can find the Hatch editor my self..Dito for XREFS
- I do not want any dialog giving me warnings, about anything.
If an XREF doesn't get attached, I can see that. I don't need a dialog telling me.If a shape file is missing, I can see that..A triangle sign above the command line is totaly adequate.Don't auto open or close dialogs, for what ever reason.
So ... don't auto do anything I can perfectly do manualy. No doubt there are a few more examples I can't think of right now.The nice thing would be to get a variable that gives me that "no auto" mode.
I am trying to create a simple action/droplet that will open a bunch of PDF files and make them a certain resolution on the open and then save as jpegs to a particular file. The problem is, when I create the action, the first step, when I open the PDF file, whatever name was in the name box, is it??? Every new PDF opens with that same name and overrides the next one.
Is there a way to tell Photoshop to pick the current name of the file opening and not use the one that was the original file that the action was created from?
I have some code (below) that will open my embedded excel spread sheet and it works great. Now I need the code to save and close the excel file after it’s been open.The embedded excel spreadsheet pushes some stuff the model and does a couple other thing. So all I really need is for the excel file to open, save, and close when the rule is run.Imports Inventor.
OLEDocumentTypeEnumExcelApp = CreateObject("Excel.Application")Dim ExcelFile As ReferencedOLEFileDescriptorExcelFile
=hisDoc.Document.ReferencedOLEFileDescriptors.Item(1)ExcelFile.Activate(kEditOpenOLEVerb, ExcelApp)
The user is running Autocad 2010, and she was able to perform this function last week. Nothing has changed, and a system reboot did not correct the issue.
View 2 Replies View RelatedIn creating an action that will be passed on to others I'm looking for a way to include a 'help window' that can be left open (with additional info they will want to refer to) until the user is finished with the action.
The 'stop' segment within an action does not contain enough space and closes when the user continues to the next segment of the action. I'm trying to figure out how to get an 'info window' to stay open during the entire action- if the user needs to refer back to it.
In PS CS5 when I open an image with height dimension in range of 1405-1411 or 1873-1882, the image opens half off the bottom of the screen. Width does opt seem to matter.
I assume this is a bug, but until fixed I am trying to work around.
For manual editing the vertical fit screen button or zooming out causes the image to come on screen, but is neither of these display options will record in an action.
When an image is opened half off screen, a Place command does not place accurately for these images. Thus an action that includes a Place does not run correctly for these images.
So either I want to find a setting (nothing in preferences that I can find) to force the image to open on screen, or find a command that will run in an action that causes image to come on screen, while not interefering with images that open normally.
how to make a routine for zoom extents, save all, and close all open drawings in a single routine?
View 3 Replies View RelatedI'm trying to work out how to create an action in Photoshop CS4 to open multiple PDF files, cropped to the Trim Box, then flattened & saved as a PSD or tiff file. Is this possible? I'm hoping so as I have about 200 to run this same sequence on!
View 2 Replies View Related to get Illustrator to open the files I needed (I open various files based on input from the user).Then I want to save them back off again using a variance of the file path of the file that was opened.I am having difficulty getting the file path of the open doc ... trying to use
ai::FilePath aiFile();
sAIDocument->GetDocumentFileSpecification(aiFile);
XCode is very unhappy with me at the moment. It is telling me that I am illegally referencing the FilePath object from inside of my button proc.
I don't know if I have the right includes in the file or have obtained the correct suites for what I want to do.The api reference says not to use the AIFilePathSuite but to use the ai::FilePath as a wrapper instead. Any examples of the SaveAs?
Basically what I want to do is take the file I have opened using the OpenAction and modify the path (take off the file name, and the last folder and then append the new folder name and file name). Then perform the save as (using native file format).
//save the doc as id.ai in a folder named as id to hold supporting files
ai::FilePath aiFile;
sAIDocument->GetDocumentFileSpecification(aiFile);
aiFile.RemoveComponent();
aiFile.RemoveComponent();
std::stringstream out;
out << "\" << displayedLogo->getLogoID().c_str() <<"\"<<displayedLogo->getLogoID().c_str()<<".ai";
aiFile.AddComponent(ai::FilePath(ai::UnicodeString(out.str())));
I unarchived a timeline from 2012, ext.2 into 2013, ext 1. Is there any way to open action from the clip using History or do I have to rebuild everything?
View 4 Replies View RelatedI created an action in CFX on my smac, and now I want to move it to my linux Smoke Advanced (v2013_sp3).
View 2 Replies View RelatedOne of my designers running 2012 AutoCAD and 2012 CADWorx, can no longer select individual parts of a GROUP by shift selecting the unwanted elements.
I have tried to modify..
Pickadd
Group
PickStyle
PickAuto
PickDrag
but to no success.
Also fiddled with her Options file, still nothing+
I downloaded multi-batch as someone here said they like it for batch plotting. Once installed, however, it has changed a setting in AutoCAD. I can no longer open more than one drawing at a time. If I have a drawing open and try to open another drawing it asks me if I want to save the current open drawing.
I can not close a drawing either without exiting AutoCAD or trying to open another drawing. I un-installed multi-batch but it did not fix the problem.