AutoCAD Inventor :: ILogic To Close / Hide Open Form
May 23, 2013I'm wondering if there is a way to either close or hide an open form with iLogic? Something like the opposite of iLogicForm.Show.
View 2 Replies
ADVERTISEMENT
AutoCAD Inventor :: Close ILogic Form With VBA Or ILogic Rule
Aug 19, 2013how can I close an iLogic Form from either an iLogic Rule, or a VBA Rule (VBA is the Preferred method)?
View 5 Replies View RelatedAutoCAD Inventor :: Close Form From Either ILogic Or VBA Rule?
Aug 16, 2013how can I close an iLogic Form from either an iLogic Rule, or a VBA Rule?
the full code text required to close a form called "Mr Form"
AutoCAD Inventor :: ILOGIC Form Stays Open After Document Closes?
Jul 11, 2012I have an assembly with a dozen or so rules and a form in it.
After selections have been made on the form, one of the rules saves the assembly as a new assembly (save as).
This closes the first assembly and opens the "saved as" assembly, BUT the form from the first assembly stays open.
It appears the first assembly gets closed so quickly the form does not close also.
I can just hit "done" button on the form to close it in new assembly, but would rather the form close automatically.
Is there code that I can add to close the form ??
AutoCAD Inventor :: Embedded Excel Spreadsheet (Open / Save And Close) (iLogic)
Apr 30, 2013I have some code (below) that will open my embedded excel spread sheet and it works great. Now I need the code to save and close the excel file after it’s been open.The embedded excel spreadsheet pushes some stuff the model and does a couple other thing. So all I really need is for the excel file to open, save, and close when the rule is run.Imports Inventor.
OLEDocumentTypeEnumExcelApp = CreateObject("Excel.Application")Dim ExcelFile As ReferencedOLEFileDescriptorExcelFile
=hisDoc.Document.ReferencedOLEFileDescriptors.Item(1)ExcelFile.Activate(kEditOpenOLEVerb, ExcelApp)
AutoCAD Inventor :: ILogic Form Trigger
Nov 29, 2012I have a ipt which is controlled via an ilogic form,this form is opened by ilogic code, which in turn is triggered when the ipt is opened.
my problem is when the part is placed within an assembly the said form is triggered and the same happens when the assembly is reopened!.... I would prefer if the form opened only when the ipt is opened or edited....
Is there a snippet of code for this? Or is it even possible?
AutoCAD Inventor :: ILogic Update Form
Sep 13, 2013I´m having a bit of an issue with a form.
I have a global form which is exactly made for a specific assembly for configuration of this very assembly. To make things easier for the user I call another external rule which only opens exactly this assembly.
Now when the user opens the form the assembly is not open and obviously can´t reference the used parameters.
Even after loading the assembly the parameters are not available, which results in something like this:
So this is a really simple question, is there a way to update a form so that it rereads the parameters from the assembly?
What I tried is using iLogicForm.CloseGlobal("Name of form") to no availability and then open it again with iLogicForm.ShowGlobal("Name of form").
But I couldn´t find any further info on the iLogicForm Commands.
AutoCAD Inventor :: ILogic Form Tabs
Apr 17, 2012I have a iLogic Form which includes several Tabs. Can I control which Tab is active if I select a radio but which controls which feature is active in the part? I have attached a picture of the Form.
View 1 Replies View RelatedAutoCAD Inventor :: Put Immediate Update Box On Ilogic Form
Aug 17, 2012I am trying to put an immediate update box on my form in ilogic. I want to be able to change parameters on my form without updating the model. There is this option in the parameters window but not in the form. How can I accomplish this?
View 1 Replies View RelatedAutoCAD Inventor :: Drop Downs In ILogic FORM?
Aug 1, 2012Can you have dropdowns in an ilogic FORM? For example I want to setup 5 choices for a custom iproperty. Then when I run the form I can pick from those 5 choices only? Please click "Accept as Solution" if this response answers your question.
Down with IDW/DWG files..... Long live 3D PMI..
AutoCAD Inventor :: Ilogic Form Picture Usage?
May 6, 2013i want to use pictures with my forms and was wondering if i can use them like the way i showed in attached image.
the CaseA image is the one i can currently use and CaseB is the way i want to use. My reason to do this is, i have alot of parameters to change and having both the picture and a menu below/above takes alot of space which also seems redundant.
AutoCAD Inventor :: Referencing ILogic Form Items?
Oct 8, 2013Is there anyway to reference a form and its specific items in iLogic. For example, say I wanted to change a label on the form when the code ran. How would I do something like this?
Form1.Label1.Value = "SomeString" ?
AutoCAD Inventor :: ILogic Form With Multiple Forms?
Oct 25, 2012I would like to know if it is possible to make a form with multiple forms, depending on the selection a could build a rectangle, or a cilynder or a cone.
View 3 Replies View RelatedAutoCAD Inventor :: ILogic Custom / Selection Form?
Jul 24, 2013I have a form used to select from pre-defined settings (case statements in the rule) and custom entry.
I have a drop down that provides the selections from the pre-defined stuff or custom with fields that show the results.
If custom is selected the user is prompted to enter data in popup dialog boxes which all works fine but I would rather select custom and enter the data in the fields on the form than in the popup. can that be done?
See the png files
I want to just enter the data in without the popup box
AutoCAD Inventor :: Unable To Create ILogic Form
Aug 31, 2012I have one particular file which will not allow me to add an iLogic form. When I select "Add Form" it does nothing. This only happens in this one file. I can open other files in the same session and they work fine. I can add iLogic rules to this file but I can't create forms.
View 3 Replies View RelatedAutoCAD Inventor :: Edit Text Ilogic Form
Jun 19, 2013I have this grid template i use for my layouts I would like to edit text from my form.. How to do???
In attached part I have it to work with the number but not with letters
AutoCAD Inventor :: How To Split ILogic Form Vertically
Aug 14, 2013I would like to split my form vertically. I have a number fo fields that are used to select options in my system. The fields span the width of the form which due to graphics used is fairly wide. I would like to add a discription field in line with and next to my selections.
View 8 Replies View RelatedAutoCAD Inventor :: Hide ILogic Code From End Users?
Sep 18, 2013I recently created some iLogic based components. I wonder how difficult it is to protect the iLogic code, similar as VBA code which can be password protected.
The reason being:
1. Of course, to hide & protect the creator's modeling logic;
2. To avoid the relation between parameters being messed up by the end user unintensionally.
I did have the opportunity to raise the question during the Portathon event and the answer was that the protection not directly available, though the workaround could be mixing with some Inventor API coding in .NET.
However, this might defeat one of the benefits of iLogic, simple and ease to use, gentlr learning curve, especially for users with VBA experience. .NET might not be so easy for a lot of engineers from mechanical or other disciplines.
1 Disable the "Edit" button for iLogic components, including rules, forms, etc.;
2. Put all code that are to be protected in an external file, and then make that file unreadable (password protected, or other protection) to un-intended user, however, readable to those who have proper access privelege.
AutoCAD Inventor :: How To Close A Text File From Within An ILogic
Nov 3, 2012I have an iLogic that runs to create parts and assemblies. These parts and sub-assemblies are for a range of library components which are either part(s) or assemblies or and assemblies composed of parts) and sub-assemblies as well. This iLogic is mostly done despite I have limited knowledge in this area. At the beginning it opens a text file (.txt) by the command line:
ThisDoc.Launch("L:\_Nov 02Info and Input GuideLines.txt")that offers guidelines and instructions.
I would like to how can I close (exit) this text file at a point within or end of the current iLogic because, it opens a several files of the same every time I run the iLogic otherwise.
AutoCAD Inventor :: ILogic Code To Close IPT File?
Aug 21, 2013Looking for the ilogic code to place in the drawing rule to close *.ipt file that was recently open.
View 2 Replies View RelatedAutoCAD Inventor :: How To Close Application (IPT And IAM) By ILogic Code
Mar 26, 2013How to close an application (*.ipt & *.iam) by ilogic code?I tried to use...ThisDoc.Document.close (True) to close it.Indeed, it can close the application, but there is an error occurred as following:
Catastrophic failure (Exception from HRESULT: 0x8000FFFF (E_UNEXPECTED))
how to avoid this error or any other way to close (or exit) the application?
AutoCAD Inventor :: Paste ILogic Form Into Thousands Of Files
Jun 20, 2012I have an iLogic Form that I've created and implemented into our model template files. I am manually adding this Form to all existing files. It's a time consuming process of opening the files one by one and pasting in the same Form over and over.
Any way or program has created where it will take a Form opened in a model and paste that same Form into a selected group of files?
BTW I'm also having to do this to the Drawing Resources folder of Inventor IDW and DWG files as I have updated/modified our border design on the new templates. I want all of our existing drawing files to have the new border. So again I'm having to manually open each drawing file and paste in the Drawing Resources folder then clicking "Replace" any time it sees an existing name rather than click "New" as it would then give me duplicates of those names.
AutoCAD Inventor :: ILogic Form - Show On Place Component
Feb 22, 2012Show on Place Component
If I set this to true, then when I "place iLogic component", I don't get the form displayed or the parameter table or the model preview.
If set True, displays the form when placing this model as a component in an assembly. This setting affects Place Component and Place iLogic Component. If the template file has a form, this setting also affects Create In-Place Component.
AutoCAD Inventor :: Can IAssembly Configuration List Appear In An ILogic Form
Aug 29, 2013A client was looking to develop a custom interface for documenting iAssemblies.
Would it be possible with iLogic to:
1. Show form.
2. User selects a Browse button to select iAssembly to document.
3. List all iAssembly configurations in the form.
4. User picks configuration.
5. Select OK to create base view, projected view, and Parts List.
This may require API.
AutoCAD Inventor :: Form Button To Place ILogic Component
Jan 22, 2013I wish to create a form that with multiple buttons. Each button will place another component (platform, stairs, ladder, railing).
I wish to place them using 'Place iLogic Component"
I know you can call this command by:
ThisApplication.CommandManager.ControlDefinitions.Item("iLogic.PlaceComponent").Execute
But is it possible to automatically browse to and open a file this way using a path "C:CPSVaultPlatformComponentsStairs.iam" within this command?
AutoCAD Inventor :: Add IProperty Summary / Comments To ILogic Form?
Oct 17, 2011Is it possible to add the iproperty summary, comments to a ilogic form?? Can't find it in the list..
Autodesk Product Design Suite Ulitmate 2012 Sp1 / Vault Collaboration 2012 Sp1
HP EliteBook 8560w
Intel(R)Core(TM) i7 CPU Q 720 @ 2,0GHz 2,0GHz
16GB RAM
Windows 7 X64 SP1
AutoCAD Inventor :: Change Active IPart With ILogic Form
Jul 29, 2013I have an Ipart I would like to have a Ilogic form to change the active Ipart. I tried iPart.ChangeRow but I did something wrong and it doesn't work.
View 2 Replies View RelatedAutoCAD Inventor :: Export ILogic Form And Save It Externally
Oct 30, 2013Is there anyway to export an iLogic form and save it externally?
View 3 Replies View RelatedAutoCAD Inventor :: How To Check Part Or Assembly Contain ILogic Form
Oct 6, 2011I've done an Addin which contains a "Place iLogic Component" function. This funcion work properly and the iLogic form is opened at place component time. Now, i would like to be able to open the form after the insertion, for edition purpose. So, i'd like to open the iLogic form of an assembly component (occurence) with the context menu for example.
So, my question is : Is there a way to check if a part or an assembly contain an iLogic form and to open it through Inventor 2012 API ?
AutoCAD Inventor :: Call Form From External File In ILogic
Mar 26, 2012I'm trying to find a way to call a form in a skeleton part file from within a parent assembly file.
I can open the form from the skeleton part, then leave it open and update values even while the skeleton part is inactive or even closed. But I can't find out how to call it from the assembly file. Is this possible? I currently have to open the skeleton just to call up the form.
I can reference values or even add them in another form, but I am not allowed to change them in an assembly form, because they are (linked) reference parameters.
I have considered several workarounds, but this is how I really want it to work. I'm just not that familiar with the code to know if there's a way around. The code snippets only allow opening a form from the current document as far as I can see. I don't really want a global from because I'm only changing parameters in one file, not all.
AutoCAD Inventor :: ILogic - Can't Set Location For Windows Form Control
Mar 21, 2013I am trying to create a windows form within iLogic. Everything works except the lines defining the location on the controls. I keep getting the following error: 'New' cannot be used on an interface. The error refers to lines in the code that try to set the control location on the form. (i.e. "button1.Location = New Point(10,10)") Ihave pasted the code below and have it attached as well. I am in Inventor 2013.
AddReference ("C:WindowsMicrosoft.NETassemblyGAC_MSILSystem.Drawingv4.0_4.0.0.0__b03f5f7f11d50a3aSystem.Drawing.dll")Dim oOccurrence As ComponentOccurrenceTry oOccurrence = ThisDoc.Document.SelectSet.Item(1)Catch MessageBox.Show("Please select a component before running this rule.", "iLogic")
[Code] ........
