How to close an application (*.ipt & *.iam) by ilogic code?I tried to use...ThisDoc.Document.close (True) to close it.Indeed, it can close the application, but there is an error occurred as following:
Catastrophic failure (Exception from HRESULT: 0x8000FFFF (E_UNEXPECTED))
how to avoid this error or any other way to close (or exit) the application?
Looking for the ilogic code to place in the drawing rule to close *.ipt file that was recently open.
View 2 Replies View Relatedhow can I close an iLogic Form from either an iLogic Rule, or a VBA Rule (VBA is the Preferred method)?
View 5 Replies View RelatedI'm looking at a way to edit the Application Options tab when a particular file is opened. For example, by loading file "template" it would set constraint options to a standard, set the background color of the application, etc. giving me a songle file to load my preferred settings.
For a first run example, need code such that when I open the file and run the rule, it would change the username from User to NWilson?
I'm very weak with the API code tools and structure, and I have zero VB experience. My train of thought is as follows:
Dim x = ThisApplication.GeneralOptions.UserName
If x = User
Then ThisApplication.GeneralOptions.UserName=NWilson
Inventor 2013
Win 7 Pro SP1 (x64)
I have an iLogic that runs to create parts and assemblies. These parts and sub-assemblies are for a range of library components which are either part(s) or assemblies or and assemblies composed of parts) and sub-assemblies as well. This iLogic is mostly done despite I have limited knowledge in this area. At the beginning it opens a text file (.txt) by the command line:
ThisDoc.Launch("L:\_Nov 02Info and Input GuideLines.txt")that offers guidelines and instructions.
I would like to how can I close (exit) this text file at a point within or end of the current iLogic because, it opens a several files of the same every time I run the iLogic otherwise.
how can I close an iLogic Form from either an iLogic Rule, or a VBA Rule?
the full code text required to close a form called "Mr Form"
Trying to make some of code collapsible.According to what i know this is achieved like this
'[
"code to be colapsed here"
']
However it does not work, I am assuming that this is because I am running INV 2009 +ilogic.
I'm wondering if there is a way to either close or hide an open form with iLogic? Something like the opposite of iLogicForm.Show.
View 2 Replies View RelatedI am new to iLogic and trying to access the "Application Options" under the "Tools" tab. I am trying to grab some information from a couple of fields but it seems that I don't have the right coding or Snippets that indicate how I would do so.
View 3 Replies View RelatedI am looking for a way to log out of vault from within Inventor using iLogic codes. I have created an iLogic rule that automates export an assembly drawing and all sub component drawings. In my code, I have suppressed all Inventor prompts but I do not have a way to suppress Vault prompts. I can manually log off from vault and run this rule without any problems. However, if I forget to do so, I am stuck responding to update requests from vault and check out requests constantly for each and every file.
any iLogic code to log in and log out of vault?
I recently created some iLogic based components. I wonder how difficult it is to protect the iLogic code, similar as VBA code which can be password protected.
The reason being:
1. Of course, to hide & protect the creator's modeling logic;
2. To avoid the relation between parameters being messed up by the end user unintensionally.
I did have the opportunity to raise the question during the Portathon event and the answer was that the protection not directly available, though the workaround could be mixing with some Inventor API coding in .NET.
However, this might defeat one of the benefits of iLogic, simple and ease to use, gentlr learning curve, especially for users with VBA experience. .NET might not be so easy for a lot of engineers from mechanical or other disciplines.
1 Disable the "Edit" button for iLogic components, including rules, forms, etc.;
2. Put all code that are to be protected in an external file, and then make that file unreadable (password protected, or other protection) to un-intended user, however, readable to those who have proper access privelege.
A while back I figured out how to put a few characters before and after several lines of code in iLogic to make it compress to one line or expand to its full size inside the code editor. I belive this is a fairly common VBA command, but I can't figure out how to do it again.
Inventor 2014
HP Pavilion dv6t-6b00
Intel Core i7 2670QM
AMD Radeon HD 6490M
8gb RAM
Windows 7 64 bit
3Dconnexion SpaceExplorer
some code that will open my company`s webpage if the parameter is set yo <True>?
i have tried alot of that is not working:
If Visit_firenor = True Then
ThisDoc.Launch("C:Program FilesInternet Exploreriexplore","http:\www.firenor.no")
End If
I`m not sure if this is possible or not.
Is there any way to write a script which copy`s a variable to the buffer? Similar to CTRL-C?
I am trying to use a code window plugin on my website, and would like to create a temple for iLogic code. Is there any way to output iLogic code in a format that would work?
I cannot modify any of the existing templates because iLogic requires information as to whether to make some text brown or blue, and it would need some form of output to do that.
[URL]
The instruction page is here: [URL]
I have been manually highlighting or using images, but both have their problems. (cut & paste will lead to a pile of errors with the manual highlighting). I can create the css file, but need some form of output beyond cut & paste to work with.
If something is worked out, it will be added to the program and be available to everyone free (this is a Wordpress plugin).
[URL]
Self built computer with;
Quad core processor
16 gigs ram
Raptor Raid main drives
2 x 1TB Caviar Black storage drives local
2 x 1TB Caviar Black storage drives network backup
Main Software;
Product Design Suite Premium
Windows 7 Home Premium
[URL]
Is it possible with iLogic code to set a parameter in a bunch of parts equal to another paramter?
I want some iLogic code that will go into my pipe parts and make the PL param = D2.
I want to use Ilogic to construct a code part name.
My question is perform a code of about 12 characters. For example the parameter "Lenght" is 600mm but in the expressione result It must be "000000000600" (a string of 12 characters)
I have a iLogic rule for saving drawings (dwg) to a pdf file in a designated folder. Everything worked well until this Monday morning. Now I get the message: Error in rule: Save2PDF, in document: 13006-027 propflens-1.dwg Value cannot be null.
Inventor 2014 sp1 | Vault basic 2014 | HP Elitebook 8670W | win7 64b | 8Gb | GMT +1
However, I have one iLogic routine that is giving me an error whenever I run it. Selecting continue allows it run as expected. Basically, it is to remind designers to set the material type to other than “Default”.
Here is the Materialsddd = 0' deleted parameter materialName = ThisDoc.Document.ComponentDefinition.Material.Name If materialName = "Default" Then MultiValue.List("MName") = iProperties.Materials MName = InputListBox("Select Material", MultiValue.List("MName"), Mname, Title := "Select Type", ListName := "MM List") iProperties.Material = Mname iLogicVb.UpdateWhenDone = True The Parameter MName does exist as a mulitlist parameter.
I was working with ilogic, Adding a new rule and all of a sudden I got an error and when I double click on a parameter to add it to the code, the format changed.
It used to look like this when I added a parameter: Parameter("vertical seperation:1", "partitionthickness")
but now when I double click on a parameter I get this: vertical seperation.ipt.partitionthickness
Also when I right click on a parameter and select display current state, It does the same thing, for some reason the code does not display like it used to.
I got an error when this first happened and I tried reproduce the error again but it did not appear again. This affected all my parts and even in different projects.
I re installed inventor because I thought there might be a file link broken but it did not fix it.
I have put together some ilogic code which is embedded within a part template, this auto populates the iproperties with the profiles length,width and thickness, and also automatically updates when any changes are made to the said profile When I hit save.
This works a treat when creating new parts, the problem arises when re-using old parts from previous jobs (Which is a regular occurrence),prior to when the code was created.
So I have to run the code as an external rule, but this has caught me,and a few other people out, as we have forgotten to run the rule after making a change to the part so the iproperties aren't automatically updated.
My question is, is there a snippet of code that I could add to my code, which embeds the the externally ran rule to the Ipt?
Is it possible to add a stop or cancel button onto ilogic code?
I have code that looks into all .ipts with a certain material type,that works great but if we run by accident there is no way of stopping code until it finishes .
I am venturing into a new area with my iLogic coding. Looking for some good examples or How-To of how to use iLogic with iParts and iAssemblies.
View 1 Replies View Related<Subassembly document name>” = iProperties.Value("Custom", "CUSTOMER P.O. NUMBER") iProperties.ValueInDoc("<Subassembly document name>.iam", "Custom", "CUSTOMER P.O. NUMBER")= Ucase(InputBox("CUSTOMER P.O. NUMBER?", "Create Customer P.O.#", iProperties.Value("Custom", "CUSTOMER P.O. NUMBER")))
View 3 Replies View RelatedI want to use iLogic to create User Parameters with Multi-Value lists filled with info from an excel spreadsheet. What is the code to create a new User Parameter?
i7-2720QM Dell Precision M6600, Win 7 Pro 64-bit, 8GB RAM
Autodesk Product Design Suite Ultimate 2013
Autodesk Vault Professional 2013
I have some code (below) that will open my embedded excel spread sheet and it works great. Now I need the code to save and close the excel file after it’s been open.The embedded excel spreadsheet pushes some stuff the model and does a couple other thing. So all I really need is for the excel file to open, save, and close when the rule is run.Imports Inventor.
OLEDocumentTypeEnumExcelApp = CreateObject("Excel.Application")Dim ExcelFile As ReferencedOLEFileDescriptorExcelFile
=hisDoc.Document.ReferencedOLEFileDescriptors.Item(1)ExcelFile.Activate(kEditOpenOLEVerb, ExcelApp)
I am trying to rewrite Curtis Waguespack's ilogic code to modify drawing view labels from this post http: [URL]...
The completed label should appear like this
<Description> - Mk <Part Number>
Est Unit Mass = X kg
(Scale 1:1)
At this point I have 2 problems
1. I want to add the physical mass to the second line and would prefer to use the calculated physcial property rather than the a custom iproperty. If editing the view label, it would the property access under physcial properties.
2. I want to rewrite the code so it is selective or per view - in otherwords, I only want it to modify a single view I select once the code is run. At this point I know I need to remove the For loop but I dont have a clue as to how to make it selective.
'start of ilogic codeDim oDoc As DrawingDocument: oDoc = ThisDoc.DocumentoModel = ThisDoc.ModelDocumentDim oSheets As SheetsDim oSheet As SheetDim oViews As DrawingViewsDim oView As DrawingViewoSheets = oDoc.SheetsFor Each oSheet In oSheetsoViews = oSheet.DrawingViews For Each oView In oViews oView.ShowLabel = True
[Code] ......
I've managed to cobble this code together to turn some sketch visibilities on and off. However, what I'd really like to do is have a single sketch containing some blocks, and turn the visibility of the blocks on and off... How to call the blocks -
'Iterate through the sketches collection'Turn the edging indicators On And Off
For Each oSketch In oDoc.ComponentDefinition.Sketches Select Case
oSketch.NameCase "Front Edged"If E01 = True Then
oSketch.Visible = TrueElse oSketch.Visible = FalseEnd IfCase "Top Edged"If E02 = True Then
oSketch.Visible = TrueElse oSketch.Visible = FalseEnd IfCase "Back Edged"If E03 = True Then
oSketch.Visible = TrueElse oSketch.Visible = FalseEnd IfCase "Base Edged"If E04 = True Then
oSketch.Visible = TrueElse oSketch.Visible = FalseEnd IfEnd SelectNext
I am trying to create a rule that if a certain property is set to Gx then certain text on a template becomes invisble.
I have created a Text style and thought the following code would suffice....
Format:HTML Format Version:1.0 StartHTML:
165 EndHTML:
1942 StartFragment:
314 EndFragment:
1910 StartSelection: 314
EndSelection: 314
SyntaxEditor Code Snippet
Ifz_ValueS="Gx"Then
ThisDoc.Document.StylesManager.Text("Standard").Visible=FalseEndIf
But alas it does not work. I guess I could create the text using layers and make the layers invisible but is it possible.
I have found some code which extracts the part number from the iproperties of a model and adds it to the custom iproperties of a drawing but this will only work on iam or ipt files.
Here's the code, I added the lines referring to the docment type as an attempt to fix the error but it didn't work...
If (ThisDrawing.ModelDocument Is Nothing) Then ReturnIf ThisDrawing.ModelDocument.DocumentType = kPresentationDocumentObject Then modelName = IO.Path.GetFileName(ThisDrawing.ModelDocument.FullFileName)End IfIf
[Code]....
I have a lot of pre existing sheet metal parts with my material listed as Steel, Mild.
I am using this code to automatcally fill out my iproperties but the material name is not exactly what I want it to say. iProperties.Value("Project", "Description")=iProperties.Material
I'd like it so that any time it sees Steel, Mild it replaces it with the text "A36"
AutoDesk Inventor 2012