I'm using photoshop 7 which is enough for me. about my problem, I can temporarely fix it by going to View -> Proof Setup -> Monitor RGB but I feel something needs to be replaced to make a permanent fix, maybe photoshop has stored previous monitor's colors values and is loading it when I load photoshop
View 17 RepliesIf you open up fifty images and they open on the secondary monitor, not the primary monitor as you wished, any way to quickly get the all on the primary one?
Did this happen because the last image I opened I dragged to 2nd monitor?
First of all Im new to the forum and I glad to be here with you all
I have this image, and I would like to know how they made this guys face yellow.
As you can see they made the guys face. All yellow with a really nice technique you can clearly see theres strong sides and some are lighter tones.
in my adobe photoshop CS2 my white is somewhat dirty or looks yellowish.
View 4 Replies View RelatedI use CS-3 on a Windows XP Home platform which uses 2 monitors, the second of which is not color-calibrated. I was just sorting through a number of lunar eclipse images, which I opened in miniature windows on the main monitor. In order to make more room for the most recent image, I dragged one of the images to monitor #2. Now, I cannot move it back to the main monitor. Moreover, all images now open onto monitor #2, regardless whether I open from ACR or from PS itself. I have maximized and minimized the image on monitor #2, but this does not help. Although I can move the image around within monitor #2, I cannot move it back onto monitor #1.
View 5 Replies View RelatedWe've just upgraded a Samsung 21" monitor to a Samsung 30" (305T).
In just TWO applications, Photoshop CS3 and Windows Photo Gallery (Vista64), all photographic images are much too dark. Not subtly, about 3-4 f-stops too dark.
EVERY other of our applications INCLUDING ADOBE BRIDGE AND FIREWORKS, and even Photoshop itself during Save to Web, displays the photos as they should appear.
I've tried setting various profiles in Windows Color Management as the default, including the ICC profile sRGB IEC61966-2.1 (which my reading says we should be using), as well as WCS profiles sRGB virtual and scRGB virtual, and tried using no profile at all. None of these changes makes any apparent difference at all to the images we're seeing.
In Photoshop, I've tried various options too. If set to Monitor Color (Monitor RGB - * wscRGB) Photoshop then displays images as it should. However the Camera Raw display when loading Nikon images is still much too dark, and the Photoshop Save to Web images are much too light. Arrrgh!
The monitor does not include any driver software, just electronic documentation (poorly edited) which offers no advice about this. I've seen references to various Gamma utilities, but not sure that's what I need. Is it?
I work in PS CS4(3) or Lightroom in Vista I ge this yellowish tone over my images, it also appears to be in regular Explorer when i view pictures there, and i know its not the monitors problem because when I view pictures in Infanview, it shows true colors, which I can also see if I upload my images to the web or view them in explorer but on my another XP machine. Is it Vista related or what?
View 2 Replies View RelatedMac OS 10.8.X
PS CS6
I work on a Mac with three monitors. My primary monitor is in the middle. I often will drag images to one of the side monitors where they'll stay open while I'm working on other images. But Photoshop will open the next image I choose on the side monitors where I've got images open.
I want all new images to open on my primary monitor, always. Is there a way to define which monitor images will open on?
I have a custom PC running Windoes 7, 4gigs of memory and an AOC 22inch LED monitor. The color white in Photoshop Elements looks off and almot a light yellow. What gives? I tried a reinstall of PE 10 to no avail.
View 2 Replies View RelatedSo, after many trials and studying websites that take images seriously on different monitors I'm considering giving up trying to get converted sRGB images from my wide gamut monitor to look good in my browser. Sure if you convert to sRGB, in a wide gamut setup, the image will look good on old monitors.
BUT it won't look good on the new ones. Nobody talks about that. It really seems that some of the high end coporate sites are already converting to adobeRGB and putting images on the web that are converted to AdobeRGB and not sRGB. The photos look great in my browser on my wide gamut monitor and those sites' photos seem washed out on the sRGB monitors I used on the same sites.
There is no way for me to know for sure sinced the images are untagged but when I download them and apply the AdobeRGB profile to them, it looks just like in the browser. The sRGB profile washes out the image. Look at [URL] ....
I was normal used Corel DRAW X6. Than one day when I run Corel DRAW X6 it become yellowish. After few days of exploring a problem I come to next conclusions.
When I use Corel DRAW X6 in Enhance or Pixel view, color of background and color palette is yellowish. In other views, color of background is white but color palette is still yellowish. Also if I run Corel with Default workspace, everything is OK, but if I run Corel with my workspace, I have a yellowish problem.
Apparently, in my Imported workspace, Corel DRAW X6 use System Default Color Profile - LG W2486, even if I set in Corel to use sRGB profile.
Probably problem is in my workspace. find where is the problem because I have a lot of changes on Workspace so it would be pain to build workspace again.
Upgraded to LR4. When selecting the 2nd monitor (Gateway) all photo images show as dim dull dark greyed out. If I move LR window from primary (NEC) to the Gateway all menu items and selections normal. All images are dull dim grey including the histogram. Selecting 2nd monitor feature places Loupe on primary display (NEC) works just fine.
If I reset Windows 7 and designate primary monitor as Gateway the problem remains unchanged.
If I place main LR window on Gateway and then select preview of 2nd monitor (CTRL-click) the pop up window renders correctly on the Gateway.
Turned off all icc profiles for monitors no improvement.
Windows 7PRo 64-bit 8GB RAM quad processor all drivers up to date. NVidia card up to date.
Other non LR windows programs and images opened on the second monitor look just fine. The Gateway will render correctly the 2nd monitor pop up preview image; so the monitor will properly display.
If I have some time I will go back to LR3 and double check that everything works fine.
Often i clone a backburner job in "backburner query monitor" and change some settings. After this the query monitor crashed almost always.
View 6 Replies View RelatedWhat is the best way to get consistent color from one monitor to another. Is that even possible?
View 6 Replies View RelatedWhy can't I drop a clip in the Program Monitor from the Source Monitor in Premiere? When I try to move a clip from the Source to the Program Monitor, a hand displays with the "circle with a line through it" symbol.
View 2 Replies View RelatedHow can separate Multicam Monitor from Program Monitor? I would like to put Multicam monitor on one monitor and hte Program on another.
View 2 Replies View RelatedIve got around 100 images (all different) of white shoes.
For each image I have to change the shoes to 35 different colours.
I am going to do this by opening the image, selecting the area of the shoe, copying to a new layer, setting mode to colour and brushing in the colour.
Each image needs to be in the same 35 colours.
Now I could do this all manually but it will take an ages. Given it is the same 35 colours for each image needed is there an easier way, maybe an action, so that i can open the image select the area i need changing and the click and it saves the image in the 35 colours?
How can I change the text on this type of images?
I mean the watermark.
What software to use?
I am asking only If I have permission to change..
I have about 10 pictures and I want to change all of them in the same manner.I know there's a recording function somewhere that allows the user to apply the same effect to several photos at one time but I don't recall where it's at.
View 5 Replies View RelatedI created the vector images but I forgot to change the resolution to 72. I created the new document and dragged it to the new one but I looked at the type is a little bit blurry now. Can I print it on resolution 200 instead of 72?
View 2 Replies View Relatedi want to write text which will be partially on top of another image layer, just like in attached photo i want my text color to change to white or something in overlapping part for visibility (like "i" is partially over the image and part over the image is white and rest is color of font choosen.
View 9 Replies View RelatedI have bunch of images that are all the same size. I was wondering if I wanted to shrink the image by 50%, do I have to do them one by one or is there some function or method so that i can do a whole batch since it's all the same commands.
View 1 Replies View RelatedHow can I change image resolution in multiple images?
View 2 Replies View RelatedI'm using Elements 11. In order to add watermarks to many JPG pics at once, I use the function "Process Multiple Files".
I select a source folder and a destination folder, and adds a three digit serial number to each file. I do NOT tick the checkbox marked "Change picture size". After that I define the watermark I want printed on my pics and hits OK. All the files in the source folder are processed and saved, with a new name in the destination folder. Fair and square.
But. The file size of the new file is heavily reduced, compared to the original. It goes from 10 MB down to 500 KB (in general). Why is that? Is there any way I can prevent it?
I have a 9 minute video of about 100 or so pictures. Each image plays about 5 seconds. I want to increase each picture to play for 7 or 8 seconds. Can I change the duration of each image without going into each image separately?
View 14 Replies View RelatedWhat I want to do is put the image on a flash drive and take it somewhere to have it printed in photo quality (my printer won't do it). But like I said the image will only open using paint.net and I'm guessing that if I put it on a flash drive as it is now, it will still ask for paint.net to open where ever I take it.So how do I change it to a jpeg or something else where it will open on it's own and be able to be printed somewhere without paint.net?
View 3 Replies View RelatedI have some problem with Nitrous Direct3D 11 - have bad blurred textures in viewport. What can I do with it?
My hardware:
i7-2600K CPU @ 3.40GHz 3.70 GHz
16GB ram
NVIDIA GeForce GTX 560
I also try change parametres in "Viewport Images and Textures Display Resolution" but blurred textures always.
This video [URL]....be explains what I need best.
View 5 Replies View RelatedWhen I upload images from Photoshop cs6 or lightroom 4.4, the uploaded images appear greenish and flat wehn compared to the original images.
View 2 Replies View RelatedIs it possible in LR4 to change the GPS coordinates of individual images?
View 4 Replies View RelatedIs there a way to change the Copyright Status from "Unknown" to "Copyright" on a group of images without having to change them individually in LR 5?
View 5 Replies View Related