I have some problem with Nitrous Direct3D 11 - have bad blurred textures in viewport. What can I do with it?
My hardware:
i7-2600K CPU @ 3.40GHz 3.70 GHz
16GB ram
NVIDIA GeForce GTX 560
I also try change parametres in "Viewport Images and Textures Display Resolution" but blurred textures always.
Recently I have come across a very big problem which has seriously inhibited my ability to texture a model in 3D Studio Max 2010. Upon importing a texture in .PSD format (so that I can change and update the texture map in Photoshop), first Max said four times over that it was an "incompatible PSD file" for some reason, and after it finally loads into Max, I can not see it in the viewport; it is just a solid white without any texture at all. It renders just fine, but I can't see what I'm doing without the texture in the viewport.
In the attached picture, the white part of the model indicates faces that have a texture map applied. The problem is that I can't see the texture in the viewport, and I need to be able to see what I am doing.
I have the "Show texture in viewport" button clicked on in the Material Editor. And I have also tried changing the preferences from Direct 3D to Open GL and changing the DirectX from 9.0 to 10.0--and that did not work.
I'm finding inside 2012 viewport 2.0 that animated textures appear unsupported. They work fine in the regular Default Quality and High Quality modes, but 2.0 as well as rendering in Hardware 2.0 leave the images static.
I have tried iff sequences but it doesn't work for those either.
How do I change a polygonal viewport to a rectangular viewport?
View 5 Replies View RelatedHow to do something like the pic below though. I mean I can get in the rough area of it but never quite as good as this. What do you even call this? Morphing?
View 5 Replies View RelatedIs it possible to create textures or patterns from images in PSP v7?
View 4 Replies View RelatedI don't know how to change render parameters. How do I chose background color? Output file size? render quality?
View 1 Replies View RelatedI seem to recall that it is possible to call up a large grey box with info regarding the clip that you hover the mouse above? I have tried to use”/” (key next to shift), but it seems to relate to contextual stuff in ConnectFX. I tried to change the hotkey, but the result is the same..?
Framerates: When I import a DPX, ProRes etc. sequence I can change the different parameters through “resize” which works really great, but I can’t change the framerate. Often I just want to playback a DPX sequence @ 25 frames/sec. instead of 24. Is this possible without using “TmeWarp”?
I have design tree like this:
Main Assembly
L Sub Assembly1
L Sub Assembly 2
L Sub Assembly 3
L part 1
in part i have a parameter name ("Panjang")... how to control "Panjang"?. I cannot access a part parameter in Sub-assembly.
[URL]
Is there a way to change programmatically parameters of applied subassembly?
View 1 Replies View RelatedI have changing the parameters of an inventor document using the inventor API by create an instance e of inventor and open the document,but it take more time .is it possible to use Apprentice Server to change the parameters of the document.?
My code is
Dim oPartDoc As PartDocument = inventorApp.ActiveDocument Dim oParameters As Parameters oParameters = oPartDoc.ComponentDefinition.Parameters() Dim oLengthParam, oWidthParam, oHeightParam As Parameter oLengthParam = oParameters.Item("d0") oWidthParam = oParameters.Item("d1") oHeightParam = oParameters.Item("d2") oLengthParam.Expression = TextBox1.Text oWidthParam.Expression = TextBox2.Text oHeightParam.Expression = TextBox3.Text oPartDoc.Update()
how can achieve the same method using ApprenticeServer?
How do change the decimal separator from point to comma(in model and FX-parameter)
View 1 Replies View RelatedI made an assembly that adjusted to sized based on some key parameters. These key parameters are controlled by a form in the main assembly. The keys parameters actually adjust the skeleton file, which then drives the frame, then all the parts are adjusted.
after changing these parameters all necessary parts would adjust to size and keep the location constraints. Worked quite well.
The issue now is that, we adopted a new naming convention and this assembly requires all the part files to be renamed. I meticulously saved each part as their new name and then replaced each component in the main assembly. This worked to an extent. The problem that I am facing is that when I saved each part as there new name, the new part retained the linked parameters to the old part. Is there a way to change this link to the newly name skeleton file?
I looked into design assistant for this process as well, but the only changes I think available were to add a prefix or suffix. If worse comes to worse, I can remodel this project but, I am sure there has to be a way to alter this.
attached is a single part with those parameters in the image above.
I have a part called "bracket" which has a multi-value parameter "mass" which can be 100, 200, 300, or 400 and controls the width of the bracket.I have an assembly into which I have placed thee brackets.
How do I set different parameters for each of the instances of "bracket"?I want one bracket with mass = 100, one with mass = 200, and one with mass = 300, such that I have three brackets of different widths.
I must not be searching on the right text in Google because I find only ways to change the value of the parameter within the core component (such that all brackets change and end up the same width).
For starters, I am using AutoCAD 2013.
I am having trouble with changing the text height of attributes in a block. I know that I can normally use BATTMAN and ATTSYNC to change the text height, but those are not working in my case.
I am using a point parameter and STRETCH action to enable my attributes to be moved, while the main object stays in place. When the attributes are not tied to the point parameter and I use BATTMAN in the block editor, the block will insert with any changes to attribute text height. When they are tied to the parameter and I use BATTMAN in the block editor, the block will insert with the attributes at the text height that they were created at. The only way I can change the text height is to use BATTMAN in model space.
I can work with this, but it would be easier to use BATTMAN in the block editor since my attributes are aligned vertically and changing the text size ruins the spacing between them. It would be much easier to both change the text size and respace in the block editor.
Is it possible to change the parameters of all the texts (photos and pages) in one time with a personnal parameter instead of doing one by one ? I don't find this functionality.
View 2 Replies View RelatedI have an assembly which contains a CComPtr<ComponentOccurrence> pThisCompOcc , and I'd like to do two things.
Get the name of the "base" object, not the display name of the occurence Change the model and user parameter values of the occurrence I suspect that I need to find the function or method which gives me a CComPtr<PartComponentDefinition> pPartCompDef which the occurrence points to for the Q1, but what about Q2?
Presumably the parameters are associated with the Component Occurrence and the "real" name is associated with the Part Component Definition?
When I created my subassembly with subassembly composer, it's difficult to change the sequency of the input/output parameters. Do we have an easy way to do that, Like moving?
View 4 Replies View RelatedIs it possible to change the parameters of a custom ipart in an assembly after it has been inserted, or can I only do an insert using AddCustomiPartMember?
In that case I simply remove the previous occurrence and insert a new one I suppose?
When I make a part in Frame Generator, by default it will name the part a big lengthy name like "frame 000001 etc etc". Is there any way that I can change the default naming system and include parameters in the name (the parameters is not necessary, but would be useful).
ALSO, if I name 2 parts the same name will it show up as "QTY 2" in my parts list?
I created a drawing in model. Then some how messed up and have two images showing up in landscape view via viewport. So it seems that their are two viewport windows working?
View 5 Replies View RelatedI have created a iLogic form for my skeletal part file that drives my assembly. The issues is that it is a few steps to get the assembly to update.
Current Steps: open skeletal part fileuse form to change size parameterssave new skeletal size changesopen assemblypress the update button if changes haven't already been applied...I have tried to link these parameters directly to the assembly and tried to create the form using those linked parameters from the skeletal part file. It looks like it would work, but I am unable to edit the parameters once the form is created.
I am hoping that the I can skip opening and editing the skeletal part file.open assembly fileuse form to change size and dimensions, and all part files and drawings are updated to that new shape and size.
I have tried to create a global Form in the skeletal part file, and tried to update the size changes in the assembly file.I was able to changes the inputs this way, but once I pressed the apply I get an error with no changes. what I want but I am not very up to date on iLogic or these forms. I will be searching Google for now.
I want to change 'mutil value select" to "custom value input" in ilogic user parameters. something like this:
if condition A then
multivalue.setlist("length", 1,2,3,4,5)
else
(users can enter any value they want, how can i remove the list first and set it to custom value input?)
I just install the max 2012,but i can just have one viewport,then I go to the viewport configure to change the layout,but it can not change. what is the problem？
View 3 Replies View RelatedBut I was wondering if it is possible to contol the insertion of dynamic blocks and it user definerable parameters from a excel-text file.
I am surveying a section of pipework and I need to display the brackets that are supporting the pipes. As there are numerous pipes on top of each other I have decided to show the brackets in plan and isometric view.
I think I have made the dynamic block ok and have numerous stretch/move and scale parameters working correctly.
But the only way that I can see of chaging these parameters at the momment is by manually typing them in the properties tool pallete for each individual block.
So I was thinking that if I can store the correct values that I need for each parameter in the dynamic block on our data logger along with the correct E,N,Z insertion point is it possible for this file to change the parameters in the dynamic block for example, If I have the correct insertion point stored and then have 10 parameters stored with that point for simplicity I store as A=5.00,B=8.00,C=0.100 etc and these correspond with the parameters in the dynamic block will this file be able to alter the dynamic block as the values in the excel/Text file are displayed.
Iam just converting back to AutoCAD from microstation.
I am trying to change the colour of a layer in my viewport. Using the layer manager i can do this but i can not get the actual item to change colour. I have checked the vplayermode is 1 and searched around but no luck !!
I change viewport layout to quad from single and it will not save. I saved a new maxstart file and have followed all directions find in Max books.Nothing seems to work. I save and turn program back on and layout is back to single.
View 2 Replies View RelatedIs there a way to change the viewport to lookdown at a face? I am modeling some objects that it would benefit to be able to view from certain angles orthographically but the object isn't square so I can't easily align it to the front, top, side, etc. views.
View 5 Replies View RelatedI'm trying to use an image (a floor plan) as a reference to model the walls of a building, I've configured the image as the top viewport background, I set it to match the bitmap and ticked lock pan/zoom. Everything is okay, the only problem is that the scale is wrong, I'd like the image to have 9x9m in the viewport, but I couldn't find a way to configure that.
View 2 Replies View RelatedI've been having trouble finding a way to change the viewport background color in AutoCAD 2013 for Mac. I've found ways for the windows OS version, but not for the mac version unfortunately.
View 1 Replies View RelatedI am working on piping plan. I have four differents pipes on same layer. I would like to change color of one pipe in active viewport and keep the layer color unchanged in same Viewport. I would like to keep the layer color unchanged for model space or other viewports.
Is there any way to change the property of an object in active viewport?