PSP 4x. when I "copy" an image from the web or other program and paste as a new image or any other option, it pastes "offset" That a piece of the image is cut off the right side and shows on the left as though it was a wrap around. This does not happen in PSP3x Must be some adjustment but cannot find.
View 5 RepliesBought x6 a couple of weeks ago together with a new Windows 8.1 and 64 bit pc. I get a problem when I paste part of one image into another one. If I want to move it or enlarge/decrease the pasted part, it freezes or only part of it appears. However, if I then click on the composed image and reduce the size a bit, the pasted part appears ok. Nuisance as it slows the process down and should not be happening. as this never happened with X3 running on Windows 7 32 bit?
View 6 Replies View RelatedPasting from Clipboard problem.
Did a screenshot JPG
Right clicked it and copied it (Win7-64 clipboard).
Started PSPX4 SP1.
Cannot paste .. paste options greyed out.
So I drag/drop the jpg into X4-SP1 ... works ok.
Also, opening the file in X4-SP1 works ok.
Tried another Copy/paste with another app .. PaintDotNet.
Pasted from Win7-64 clipboard ok.
Plug Ins and tablet installed.
KPT filters
NIK Color Efex Pro 3.0
Wacom Intuos4 Tablet
I have a problem pasting an Adobe Acrobat snapshot as new picture in PSP4. Pasting it directly e.g. to MS Word works fine, but I would need some of the snapshots also as a jpg file.
I use the Adobe Acrobat X (ver 10.1.2) Standard snapshot tool to copy a picture and then try to paste it to PSP4 as new image. The result is every time the same: about 7 mm slice from the right is moved to the left side of the image. See attachment.
The attached file is an example showing 7 mm slice from right side of the image on the left side.
Recently, had to stop using Corel PhotoImpact, since Corel stopped supporting it. Switched to PaintShop Pro X4
Running Win 7 64 bit, Office 2007
I have to repeatedly copy and paste from PaintShop Pro X4 into Word 2007.
When I choose the default paste, the pictures are fuzzy in Word
1) this is not a problem with other programs, such as Irfranview, as the source, instead of PaintShop Pro X4.
2) if choose "Paste Special" in Word-->bitmap, pictures are sharp. It is the default paste that is the problem.
3) I do not want to have to use "Paste Special" all the time
This is rather odd, to say the least. Why should the same image captured by the Windows clipboard from PaintShop Pro X4 vs Irfranview behave differently when pasted into Word 2007?
Using the below steps causes a string of pixels to delete, and forum I visited [URL]..... with similar issues think it's a bug in PaintShop Photo Pro X3 13.0.0.253. I now have version X3 - 13.2.1.20 after updates.
1. Start a new image, with solid background.
2. Selection tool, rectangle, add/shift, feather 0, anti-alias on.
3. Draw out a 3" rectangle. Flood fill or paint in the shape with a solid contrasting color. Leave shape selected.
4. Go to Edit, Copy.
5. Go to Edit, Paste as transparent selection.
6. Place the copy to the right and up against the first shape.
7. Go to selections, Select None.
Take note that there is a string of pixels that is being removed. The above steps were posted by my peers in the PaintShop Photo Pro community forum I mentioned above.
What I’ve been trying to do is Paste As New Selection from one image into another, and pixels are cut off once I click to release the selection. I’ve tried different things, like expanding the canvas of the pasted image, and other things, but nothing has worked.
I have an image jpg, i want to add another person in the pic from another pic and be able to resize the pic I pasted. can u tell me what steps to take/ been going crazy trying to do this. As u can tell a new user.
View 2 Replies View RelatedIf I have two images, one is a texture map and the other is a normal map, how do I essentially paste the normal map into the alpha channel?
The stuff I am importing into (OpenSimulator) uses a single image to put texture and normal map information onto an object but so far I can't see anywhere to create the alpha channel.
I am not using the alpha channel for transparency, which seems to be a source of confusion (elsewhere). The thing is I CAN use it for that (transparency I mean) simply by making part of my image transparent (This is splendid by the way, and is yet another reason why I adore Paint.Net), this implies to me there are alpha channels or that the transparency thing is something different.
I have two pictures and I try to copy a small part of one picture to the other.I did a rectangular selection of 2 cm square of the first picture and copied it but when I pasted it in the other picture the selection was now 4.68 cm square.
I suspect that's because the two pictures have not the same resolution. How can I keep the size of the selection from two pictures of different resolution?
1. I have created a rectangular selection
2. I have rotated it with right mouse button pressed.
3. I want to copy&paste selection as the new picture, but I need to rotate manually selected image part before that to fit into new canvas exactly.
Is it possible for the result to be autorotated to fit rectangular canvas?
Just came upon an error I had not seen before. Though PSP no longer supports Animation Shop, up until PSP X4, the user has been able to export frames back to PSP from Animation Shop. Now, this no longer works! There's still some communication there, because an error message - which, incidentally, makes absolutely no sense at all - is generated in PSP X4:
View 2 Replies View RelatedI installed PSP X4 today on a new PC with Windows 7 and noticed that it has no Animation Shop. Can I install Animation Shop to this machine? Will it work without PSP 9 or does it need certain dlls from PSP 9 ? I really want to be able to use Animation Shop again.
View 7 Replies View RelatedI need an offset lisp routine to offset a selected line a set distance on each side of the selected line and change the layer of the offset lines to the current layer, and then keep prompting me to select the next line for offsetting until I'm finished.
View 3 Replies View RelatedI am trying to create a station-offset label style that will drop the trailing zeros in the offset section - e.g. 15' instead of 15.00', but if the offset is not at a whole number, e.g. 15.01, etc. it will display the entire offset.
I created two expressions: IF(OFFSET-TRUNC(OFFSET)=0,.1/12,.00000001/12)
and this one: IF(OFFSET-TRUNC(OFFSET)!=0,.1/12,.00000001/12)
I then created two offset components, one called truncated, and one called full, and assigned the heights to match the expressions.
I have attached the file, the style is ACHD-Sta Off-Rt [copy]
C3D 2011, Win x64
I am using MAYA 2012 on Windows 7. When I import audio (.WAV) it works fine, but if I offset it to a later frame the waveform moves to the right frame but when scrubbing the audio stays at 0. Making if very difficult to lip-sync. I have tried re-caching, playing the scene all the way through and all other options I have seen online.
View 1 Replies View RelatedIs there a Print Layout in X5 similar to that in Paint Shop Pro?
View 1 Replies View RelatedMy program worked just great, then all of a sudden the paint brush and eraser will not do a thing.
View 14 Replies View Relatedif is possible to create the paint drips in the attached design. I really want to learn how to create urban designs, is corel paint shop x3 suitable for that?
View 2 Replies View RelatedI want to use the paint brush for editing a photo I have, but the only color available is black. No matter where I've looked in PSP, there was no option to change the color of the paint brush. I've read online that you need to change the pallet to material pallet, then go to "Foreground & Stroke Properties" and set the color box to the color I want, but the only colors I get are different hues of black and gray.
Even in Paint it's just a matter of clicking the desired color to use different colors. Why isn't it so simple in PSP?
How do I paste a graphic over an existing graphic on a header? and how do I determine the amount of pixels to be covered and the amount of pixels in the graphic I am wanting to use?
View 3 Replies View RelatedI need a pit configuration, and I use the offset command to offset a base polyline to first 10 m and then 3 and so on.. is there a way to do this in an automatically way, that you can choose the lenght of the offset for each "offset" (i.e. 1st 10 m, 2nd 3, 3rd 10 m, 4th 3 m, and so on. I am actually using civil 3D.
View 2 Replies View RelatedOk, either I am totally loosing it, or it just ain't happening.
I cannot get the Nik HDR module to work with my PSP X5
It's installed, it shows up in my Effects menu, but it only imports one of the photos I have opened in my edit tab.
What am I missing??
Using PSPP X3 Ultimate.
I have some Tif files and jpeg files that are 600dpi and 400dpi. I scanned these images with my Canon CanoScan LiDE 700F scanner. Can i use my version of PSPP X3 Ultimate to change the dpi value? Is this stuck? I wanted to be able to get the 600 and 400 dpi image files (I have some 300dpi's too) down to the 100-250 range if I needed to. I see there are different export options and compression in PSPPX3Ultimate, but I'm not sure if this will do what I want.
I want to export as Tif and Jpeg again.
Are there any good third party photo and or video editors that I can batch edit this with? It's ok to mention pay programs and I'd prefer good quality freeware if there is such a thing. I am sure that my Corel program can do the trick though. I just don't know how and don't want to rescan multiple dpi's every single time. I only need the archives and then get the smaller dpi when needed.
I was using a trial version of paint shop pro x5 and still had 11 days left of my trial when it suddenly stopped working. When I click on the icon to start paint shop pro it starts up and then freezes every time when it is loading in the spot that says "initializing color swatches".
I haven't changed anything on my computer- it just suddenly stopped working. I uninstalled it and tried reinstalling it, I also tried restoring it.
I installed PaintShop Pro Ultimate X3 several months ago. It worked fine initially, but then stopped running and gave me an error message pertaining to a language error. In an effort to fix the problem, I have completely uninstalled the application and removed all of its registry entries. I then reinstalled the program, which appeared to be successful, however, now it simply will not run and gives no error message whatsoever. When you click the desktop icon, it tries to load momentarily, then does nothing more.
I have removed my virus protection and my User Account Control.
What is the best method to upgrade from X3 to X5...should I remove X3 first for example?
View 2 Replies View RelatedDuring preparing a collage, when I try to save the project, I receive the the message that I don't have enough memory.I am using windows 7 and as far as I know, I don't have memory problems. I am working a lot with VideoStudio x4 without any problems.
View 5 Replies View RelatedI would like to add some Plugins to PSPPX3, I read/understand i should add the Plug-ins path at Preferences>File Location>Plug-ins - But there is no such option or Preferences>Workspace>Plug-ins - Same story
There was also no Plug-ins map or Workspace map in: C:Program FilesCorelCorel PaintShop Photo ProX3PSPClassicLanguagesNL
I installed PSPPX3 today, and i updated it and downloaded patch 1-4. How / where to install plugins?
When I open a jpeg in X4 it always says it is at 72 dpi. Even when I resize it so it is at 220, when I open it again and look under image information it always says 72 dpi. If I open the same image in any other editor, including X3 it reports the correct dpi. This coupled with the extreme compression is making X4 useless to me unfortunately.
I'm not prepared to sit and do the math to try and figure out what it is really at.
I have reset the number under preferences/general program preferences/units and it doesn't respond to that either.
For me, this version is problematic and not worth taking the time to learn. I need to be able to depend on and trust the information I'm getting from my software.
I normally upgrade every other version. I currently use X2 on a Windows XP computer. My primary uses are photo editing. My key interests are:
- processing 16 bit per color files
- use of layers and blends
- stereo photography (combining and aligning stereo pairs)
- use of various tools such as cloning and healing.
- Color management and Printing
Reviewing the product page, I haven't really found anything that shows a list of upgraded or added features. Most of the things mentioned appear to be in X2 already. Looking at the thread calling for future features, it appears that the things missing are still missing. X2 is serving me well, but there has to be some reason to upgrade?
I have a trial version of PSP X6. I'd like to move and use my workspaces from X5. I've tried everything I can think to do: point to the X5 workspaces folders, copying the X5 workspaces to the X6 folder, adding the X5 folders in the File Locations Preferences, etc.
View 1 Replies View Related